[Bug 224496] mpr and mps drivers seems to have issues with large seagate drives

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224496

--- Comment #49 from Conall O'Brien <conall@conall.net> ---
I've been experiencing these issues with WD Red 6TB disks. I had frequent,
unexplained reboots with 12.1-RELEASE and 12.2-RELEASE. 
mprutil show all
Adapter:
mpr0 Adapter:
       Board Name: LSI3008-IR
   Board Assembly: 
        Chip Name: LSISAS3008
    Chip Revision: ALL
    BIOS Revision: 12.00.00.00
Firmware Revision: 10.00.00.00
  Integrated RAID: yes

PhyNum  CtlrHandle  DevHandle  Disabled  Speed   Min    Max    Device
0       0001        0009       N         6.0     3.0    12     SAS Initiator 
1       0002        000a       N         6.0     3.0    12     SAS Initiator 
2       0003        000b       N         6.0     3.0    12     SAS Initiator 
3       0004        000c       N         6.0     3.0    12     SAS Initiator 
4       0005        000d       N         6.0     3.0    12     SAS Initiator 
5       0006        000e       N         6.0     3.0    12     SAS Initiator 
6       0007        000f       N         6.0     3.0    12     SAS Initiator 
7       0008        0010       N         6.0     3.0    12     SAS Initiator 


Since upgrading to 13.0-RELEASE I am no longer experiencing reboots, but I do
continue to see CAM errors


da7:mpr0:0:9:0): Info: 0x8024c3a0
(da7:mpr0:0:9:0): Error 22, Unretryable error
(da7:mpr0:0:9:0): WRITE(10). CDB: 2a 00 80 24 c3 e8 00 00 08 00 
(da7:mpr0:0:9:0): CAM status: SCSI Status Error
(da7:mpr0:0:9:0): SCSI status: Check Condition
(da7:mpr0:0:9:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address
out of range)
(da7:mpr0:0:9:0): Info: 0x8024c3e8
(da7:mpr0:0:9:0): Error 22, Unretryable error
(da7:mpr0:0:9:0): WRITE(10). CDB: 2a 00 3a 80 4d 20 00 00 10 00 
(da7:mpr0:0:9:0): CAM status: SCSI Status Error
(da7:mpr0:0:9:0): SCSI status: Check Condition
(da7:mpr0:0:9:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address
out of range)
(da7:mpr0:0:9:0): Info: 0x3a804d20
(da7:mpr0:0:9:0): Error 22, Unretryable error
(da7:mpr0:0:9:0): WRITE(10). CDB: 2a 00 31 c4 f0 90 00 00 10 00 
(da7:mpr0:0:9:0): CAM status: SCSI Status Error
(da7:mpr0:0:9:0): SCSI status: Check Condition
(da7:mpr0:0:9:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address
out of range)
(da7:mpr0:0:9:0): Info: 0x31c4f090
(da7:mpr0:0:9:0): Error 22, Unretryable error
(da7:mpr0:0:9:0): WRITE(10). CDB: 2a 00 31 c4 f8 b8 00 06 88 00 
(da7:mpr0:0:9:0): CAM status: SCSI Status Error
(da7:mpr0:0:9:0): SCSI status: Check Condition
(da7:mpr0:0:9:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address
out of range)
(da7:mpr0:0:9:0): Info: 0x31c4f8b8
(da7:mpr0:0:9:0): Error 22, Unretryable error
(da7:mpr0:0:9:0): WRITE(10). CDB: 2a 00 31 c3 c0 a0 00 01 60 00 
(da7:mpr0:0:9:0): CAM status: SCSI Status Error
(da7:mpr0:0:9:0): SCSI status: Check Condition
(da7:mpr0:0:9:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address
out of range)
(da7:mpr0:0:9:0): Info: 0x31c3c0a0
(da7:mpr0:0:9:0): Error 22, Unretryable error
(da7:mpr0:0:9:0): WRITE(16). CDB: 8a 00 00 00 00 02 ba a0 f0 10 00 00 00 10 00
00 
(da7:mpr0:0:9:0): CAM status: SCSI Status Error
(da7:mpr0:0:9:0): SCSI status: Check Condition
(da7:mpr0:0:9:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address
out of range)
(da7:mpr0:0:9:0): Info: 0x2baa0f010
(da7:mpr0:0:9:0): Error 22, Unretryable error
(da7:mpr0:0:9:0): WRITE(16). CDB: 8a 00 00 00 00 02 14 4b b4 c0 00 00 00 08 00
00 
(da7:mpr0:0:9:0): CAM status: SCSI Status Error
(da7:mpr0:0:9:0): SCSI status: Check Condition
(da7:mpr0:0:9:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address
out of range)
(da7:mpr0:0:9:0): Info: 0x2144bb4c0
(da7:mpr0:0:9:0): Error 22, Unretryable error


I have upgraded to 13.0-RELEASE-p1, on account of FreeBSD-EN-21:13.mpt . Could
the issues from that errata notice also be an issue for mps?

-- 
You are receiving this mail because:
You are the assignee for the bug.