Re: A how-to for FreeBSD 15.0 on Raspberry Pi 5 with NVMe

From: Torfinn Ingolfsen <torfinn.ingolfsen_at_getmail.no>
Date: Sat, 07 Feb 2026 14:52:39 UTC 
On Fri, 6 Feb 2026 15:24:01 +0100
Alex Samorukov <samm@freebsd.org> wrote:

> So eth is still not working, correct?

Correct. I'm using a usb to ethernet dongle

root@devpi5:~ # freebsd-version -ku
14.3-RELEASE-p8
14.3-RELEASE-p8
root@devpi5:~ # ifconfig
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
	groups: lo
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
ue0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	options=68009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 3c:18:a0:20:6a:49
	inet 10.1.161.11 netmask 0xffff0000 broadcast 10.1.255.255
	inet6 fe80::3e18:a0ff:fe20:6a49%ue0 prefixlen 64 scopeid 0x2
	inet6 fd8c:2fd0:94bd:0:3e18:a0ff:fe20:6a49 prefixlen 64 autoconf
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>

HTH
-- 
Torfinn Ingolfsen <torfinn.ingolfsen@getmail.no>