freebsd-arm@FreeBSD.org

Porting FreeBSD to ARM processors

Go to: [ monthly archives ] [ by author ] [ by date ]

June 2025 Archives by thread

Re: Exec format error from armv7 snapshot on RPi2: Mark Millard (Sun, 01 Jun 2025 02:10:02 UTC)

Re: Exec format error from armv7 snapshot on RPi2: bob prohaska (Sun, 01 Jun 2025 21:56:37 UTC)

Re: Exec format error from armv7 snapshot on RPi2: Mark Millard (Sun, 01 Jun 2025 23:30:26 UTC)

Re: Exec format error from armv7 snapshot on RPi2: bob prohaska (Mon, 02 Jun 2025 02:32:26 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 01 Jun 2025 21:00:40 UTC)
Installworld: rescue/sh check failed, core dumped : bob prohaska (Mon, 02 Jun 2025 19:01:37 UTC)

Re: Installworld: rescue/sh check failed, core dumped: Mark Millard (Mon, 02 Jun 2025 22:00:43 UTC)

Re: Installworld: rescue/sh check failed, core dumped: Mark Millard (Tue, 03 Jun 2025 04:37:33 UTC)
Re: Installworld: rescue/sh check failed, core dumped: bob prohaska (Tue, 10 Jun 2025 00:46:24 UTC)

RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Wed, 04 Jun 2025 12:33:26 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Ronald Klop (Wed, 04 Jun 2025 13:00:44 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Wed, 04 Jun 2025 14:13:00 UTC)
Re: RPI 4/5 u-boot new port, is there any interest?: Johan Helsingius (Wed, 04 Jun 2025 14:26:54 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Patrick M. Hausen (Wed, 04 Jun 2025 14:31:21 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Warner Losh (Wed, 04 Jun 2025 15:00:47 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Patrick M. Hausen (Wed, 04 Jun 2025 15:12:33 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Mark Millard (Wed, 04 Jun 2025 15:28:04 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Wed, 04 Jun 2025 15:27:56 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Paul Floyd (Wed, 04 Jun 2025 19:20:59 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Mark Millard (Wed, 04 Jun 2025 15:01:55 UTC)
Re: RPI 4/5 u-boot new port, is there any interest?: Warner Losh (Wed, 04 Jun 2025 15:49:19 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: bob prohaska (Wed, 04 Jun 2025 18:32:37 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Wed, 04 Jun 2025 21:06:18 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Evgenii Ivanov (Wed, 04 Jun 2025 21:27:36 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Wed, 04 Jun 2025 21:41:39 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Bjoern A. Zeeb (Wed, 04 Jun 2025 22:21:38 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Wed, 04 Jun 2025 23:25:23 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: bob prohaska (Wed, 04 Jun 2025 22:28:10 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Mark Millard (Wed, 04 Jun 2025 15:50:02 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Warner Losh (Wed, 04 Jun 2025 15:54:54 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Mark Millard (Wed, 04 Jun 2025 16:11:32 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Warner Losh (Wed, 04 Jun 2025 16:19:51 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Wed, 04 Jun 2025 16:23:18 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Mark Millard (Wed, 04 Jun 2025 16:59:44 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Wed, 04 Jun 2025 17:51:26 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Adrian Chadd (Thu, 05 Jun 2025 05:15:57 UTC)

Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such]: Mark Millard (Thu, 05 Jun 2025 10:38:58 UTC)

Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such]: Mark Millard (Fri, 06 Jun 2025 00:05:13 UTC)
Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such]: Mark Millard (Fri, 06 Jun 2025 02:26:49 UTC)
Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such, NMVe booting too]: Mark Millard (Fri, 06 Jun 2025 04:04:41 UTC)
Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such, NMVe booting too]: Bjoern A. Zeeb (Fri, 06 Jun 2025 15:39:23 UTC)
Re: RPI 4/5 u-boot new port, is there any interest? [16 GiByte RPi5B (D0) basics operational via the EDK2 variant for such, NMVe booting too]: Mark Millard (Fri, 06 Jun 2025 17:06:50 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Klaus_Küchemann (Thu, 05 Jun 2025 12:50:47 UTC)

Re: RPI 4/5 u-boot new port, is there any interest?: Paul Floyd (Wed, 04 Jun 2025 19:17:42 UTC)

Any ideas how/when this got broken -- and how I unbreak it?: Karl Denninger (Sat, 07 Jun 2025 18:15:17 UTC)

Re: Any ideas how/when this got broken -- and how I unbreak it?: Karl Denninger (Sat, 07 Jun 2025 19:35:14 UTC)

Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Sun, 08 Jun 2025 15:08:30 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Tomek CEDRO (Sun, 08 Jun 2025 16:05:12 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Warner Losh (Sun, 08 Jun 2025 17:07:41 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Klaus_Küchemann (Sun, 08 Jun 2025 17:23:52 UTC)
Re: Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Sun, 08 Jun 2025 17:46:29 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Warner Losh (Sun, 08 Jun 2025 18:01:14 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Mon, 09 Jun 2025 00:27:28 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Mon, 09 Jun 2025 01:29:50 UTC)
Re: Loading splash ok -> <reset>, how to debug?: Warner Losh (Mon, 09 Jun 2025 03:54:17 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Mon, 09 Jun 2025 14:16:58 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Adrian Chadd (Sun, 08 Jun 2025 18:01:30 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 08 Jun 2025 21:00:59 UTC)
Re: Loading splash ok -> <reset>, how to debug?: Mark Millard (Mon, 09 Jun 2025 02:00:49 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Mon, 09 Jun 2025 02:15:48 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Warner Losh (Mon, 09 Jun 2025 03:57:09 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Mark Millard (Mon, 09 Jun 2025 05:04:35 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Warner Losh (Mon, 09 Jun 2025 10:20:46 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Mon, 09 Jun 2025 14:27:05 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Warner Losh (Mon, 09 Jun 2025 15:00:16 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Mon, 09 Jun 2025 15:36:19 UTC)
Re: Loading splash ok -> <reset>, how to debug?: Bjoern A. Zeeb (Wed, 11 Jun 2025 00:37:05 UTC)

Re: Loading splash ok -> <reset>, how to debug?: Warner Losh (Wed, 11 Jun 2025 03:14:36 UTC)

Looks like good news on the package builder timeframes for official 'bulk -Ca' (and the like) builds: Mark Millard (Tue, 10 Jun 2025 23:11:30 UTC)
Very long-running buildworld process: bob prohaska (Wed, 11 Jun 2025 03:59:14 UTC)

Re: Very long-running buildworld process: Mark Millard (Wed, 11 Jun 2025 05:24:26 UTC)

Re: Very long-running buildworld process: bob prohaska (Wed, 11 Jun 2025 14:08:01 UTC)

Re: Very long-running buildworld process: Mark Millard (Thu, 12 Jun 2025 04:31:54 UTC)

Re: Very long-running buildworld process: bob prohaska (Thu, 12 Jun 2025 16:50:28 UTC)

Re: Very long-running buildworld process: Mark Millard (Thu, 12 Jun 2025 17:33:24 UTC)

Re: Very long-running buildworld process: bob prohaska (Thu, 12 Jun 2025 18:51:35 UTC)

Re: Very long-running buildworld process: Mark Millard (Thu, 12 Jun 2025 20:28:27 UTC)

Re: Very long-running buildworld process: bob prohaska (Fri, 13 Jun 2025 04:04:19 UTC)
Re: Very long-running buildworld process: Mark Millard (Fri, 13 Jun 2025 05:34:50 UTC)
Re: Very long-running buildworld process: bob prohaska (Sat, 14 Jun 2025 00:04:16 UTC)

Some RPi5B "D0" status . . .: Mark Millard (Wed, 11 Jun 2025 20:30:01 UTC)
How to activate HDMI output with FreeBSD running on a CM3+?: Patrick M. Hausen (Thu, 12 Jun 2025 17:18:56 UTC)

Re: How to activate HDMI output with FreeBSD running on a CM3+?: Karl Denninger (Thu, 12 Jun 2025 17:24:07 UTC)

Re: How to activate HDMI output with FreeBSD running on a CM3+?: Patrick M. Hausen (Thu, 12 Jun 2025 17:38:22 UTC)

Re: How to activate HDMI output with FreeBSD running on a CM3+?: Patrick M. Hausen (Thu, 12 Jun 2025 17:52:30 UTC)

Re: What abouth the panfrost "driver" installed on the Radxa Zero 3W (Rockchip RK3566): Mario Marietto (Sun, 15 Jun 2025 20:07:28 UTC)

Re: What abouth the panfrost "driver" installed on the Radxa Zero 3W (Rockchip RK3566): Mario Marietto (Mon, 16 Jun 2025 07:41:10 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 15 Jun 2025 21:01:00 UTC)
usr.bin/dtc sync with upstream (https://reviews.freebsd.org/D42438): Stanislav Silnicki (Sun, 15 Jun 2025 23:22:11 UTC)
RPi5 context: How to report to EDK2 developer why FreeBSD gets 'nvme0: unable to allocate MSI-X' (and for MSI too): Mark Millard (Fri, 20 Jun 2025 15:16:04 UTC)
WARNING: Unimplemented Standard Service Call:: Bjoern A. Zeeb (Fri, 20 Jun 2025 23:51:02 UTC)

Re: WARNING: Unimplemented Standard Service Call:: Mark Millard (Sat, 21 Jun 2025 00:41:26 UTC)

Re: WARNING: Unimplemented Standard Service Call:: Bjoern A. Zeeb (Sat, 21 Jun 2025 01:03:33 UTC)

Re: WARNING: Unimplemented Standard Service Call:: Mark Millard (Sat, 21 Jun 2025 01:58:17 UTC)

Re: WARNING: Unimplemented Standard Service Call:: Rebecca Cran (Sat, 21 Jun 2025 21:44:49 UTC)

Re: WARNING: Unimplemented Standard Service Call:: Bjoern A. Zeeb (Sat, 21 Jun 2025 22:08:51 UTC)

Re: WARNING: Unimplemented Standard Service Call:: Mark Millard (Sat, 21 Jun 2025 22:58:21 UTC)

Re: WARNING: Unimplemented Standard Service Call:: Andrew Turner (Mon, 23 Jun 2025 12:47:52 UTC)

Re: WARNING: Unimplemented Standard Service Call:: Bjoern A. Zeeb (Tue, 24 Jun 2025 22:48:03 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 22 Jun 2025 21:01:15 UTC)
Zynq 7 drivers source code location: Michał_Kruszewski (Tue, 24 Jun 2025 08:27:14 UTC)

Re: Zynq 7 drivers source code location: Milan Obuch (Tue, 24 Jun 2025 14:52:49 UTC)

Re: Zynq 7 drivers source code location: Tomek CEDRO (Tue, 24 Jun 2025 18:36:21 UTC)

Building world with FORTIFY_SOURCE (contrib/ and sys/contrib/ patches): Dmitry Salychev (Wed, 25 Jun 2025 20:13:43 UTC)
Panfrost GPU: titus (Fri, 27 Jun 2025 18:30:51 UTC)

Re: Panfrost GPU: Jesper Schmitz Mouridsen (Sat, 28 Jun 2025 13:45:22 UTC)

Re: Panfrost GPU: Mario Marietto (Sat, 28 Jun 2025 13:56:47 UTC)
Re: Panfrost GPU: titus (Mon, 30 Jun 2025 07:58:30 UTC)
Re: Panfrost GPU: titus (Mon, 30 Jun 2025 09:19:17 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 29 Jun 2025 21:00:36 UTC)
Solid-Run Honeycomb LX2K FreeBSD Install 14.3-STABLE or 15.0-CURRENT, What is your written documented method for installation?: Fred Finster (Mon, 30 Jun 2025 11:14:06 UTC)

Re: Solid-Run Honeycomb LX2K FreeBSD Install 14.3-STABLE or 15.0-CURRENT, What is your written documented method for installation?: Dmitry Salychev (Mon, 30 Jun 2025 17:32:01 UTC)
Re: Solid-Run Honeycomb LX2K FreeBSD Install 14.3-STABLE or 15.0-CURRENT, What is your written documented method for installation?: Mark Millard (Mon, 30 Jun 2025 18:00:38 UTC)

Go to: [ monthly archives ] [ by author ] [ by date ]