Re: Does exists one Radxa board where the HDMI works with FreeBSD

Hello.

Would be exciting to try your image on a Radxa Zero 3W with the 4 inches
HDMI squared display that I've bought.

Very thanks bro.

On Sun, Apr 20, 2025 at 10:52 AM Søren Schmidt <soren.schmidt@gmail.com>
wrote:

> Hi
>
> The official FreeBSD sources won’t work as is at least.
>
> The RK3566 SOC on those are almost supported by FreeBSD but there are bits
> and bytes missing or wrong.
>
> However I have patches that makes both EDK2 and FreeBSD-14-stable useable.
> On the RK356X SOC’s, and will happily share it.
>
> If you just need to verify that it works I can build you an image you can
> try out..
>
> --
> Søren Schmidt
> sos@deepcore.dk / sos@freebsd.org
> "So much code to hack, so little time"
>
>
> On 19 Apr 2025, at 21.32, Mario Marietto <marietto2008@gmail.com> wrote:
>
> Hello.
>
> I would like to know if the Radxa ZERO 3W or 3E or any other model is well
> supported by FreeBSD. I'm not interested to have the wi-fi and the BT
> working,but I need that at least the HDMI works because I'm planning to
> assemble a mobile phone choosing this HDMI display :
>
> https://it.aliexpress.com/item/1005008301365011.html
>
> I'm interested in using one Radxa board because it offers more than the
> raspberry pi zero.
>
> Thanks.
>
>
>

-- 
Mario.