[Bug 271482] Raspberry Compute Module 4 IO does not boot

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=271482

            Bug ID: 271482
           Summary: Raspberry Compute Module 4 IO does not boot
           Product: Base System
           Version: 13.2-RELEASE
          Hardware: arm64
                OS: Any
            Status: New
          Severity: Affects Only Me
          Priority: ---
         Component: arm
          Assignee: freebsd-arm@FreeBSD.org
          Reporter: berkovski@dilyan.be

Created attachment 242245
  --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=242245&action=edit
FreeBSD dmesg for Compute Module 4 IO board

RPI 4 Compute Module 4
(https://www.raspberrypi.com/products/compute-module-4/?variant=raspberry-pi-cm4001000)
and its IO official board
(https://www.raspberrypi.com/products/compute-module-4-io-board/) are unable to
boot 13.2, 13.1 and 14.0-current.
13.1 and 13.2 keep rebooting constantly, 14.0 does not even start booting.
Tested with serial console and monitor.

appears that the devmatch issue is not solved for this platform, and the only
way to make the system boot is adding devmatch_enable="NO" to rc.conf.
In addition, the PCI slot is not loading the drivers, and could not make any
PCI to SATA cards (that work on FreeBSD) - ASMedia ASM1061, Marvell 88SE9215
(both covered by AHCI).
attaching the dmesg.

-- 
You are receiving this mail because:
You are the assignee for the bug.