git: 1aeb9d782ea1 - main - Revert "rk_gpio: defer level-IRQ EOI until source line is driven low"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Tue, 14 Jul 2026 15:06:08 UTC
The branch main has been updated by mhorne:
URL: https://cgit.FreeBSD.org/src/commit/?id=1aeb9d782ea15f4f70fe104beac6eea1d27c5d92
commit 1aeb9d782ea15f4f70fe104beac6eea1d27c5d92
Author: Mitchell Horne <mhorne@FreeBSD.org>
AuthorDate: 2026-07-14 15:02:53 +0000
Commit: Mitchell Horne <mhorne@FreeBSD.org>
CommitDate: 2026-07-14 15:06:00 +0000
Revert "rk_gpio: defer level-IRQ EOI until source line is driven low"
There is a more correct / preferable scheme for handling of EOI.
Requested-by: mmel
This reverts commit 8ffb400bfd64102ac2a49639ccbbfffbe0c6f127.
---
sys/arm64/rockchip/rk_gpio.c | 57 +++-----------------------------------------
1 file changed, 3 insertions(+), 54 deletions(-)
diff --git a/sys/arm64/rockchip/rk_gpio.c b/sys/arm64/rockchip/rk_gpio.c
index 8988ecf992a1..7c2071d2d178 100644
--- a/sys/arm64/rockchip/rk_gpio.c
+++ b/sys/arm64/rockchip/rk_gpio.c
@@ -219,31 +219,13 @@ rk_gpio_intr(void *arg)
RK_GPIO_LOCK(sc);
status = rk_gpio_read_4(sc, RK_GPIO_INT_STATUS);
+ rk_gpio_write_4(sc, RK_GPIO_PORTA_EOI, status);
RK_GPIO_UNLOCK(sc);
while (status) {
int pin = ffs(status) - 1;
- bool is_level;
status &= ~(1 << pin);
-
- /*
- * Edge-triggered latches must be cleared before dispatch
- * so a new edge during the handler still registers a new
- * IRQ. Level-triggered latches must be cleared AFTER the
- * consumer has deasserted the source line, otherwise the
- * latch immediately re-arms and we storm. Edge EOI here;
- * level EOI is deferred to pic_post_filter (filter-only
- * consumers) or pic_post_ithread (threaded consumers).
- */
- is_level = (sc->isrcs[pin].mode &
- (GPIO_INTR_LEVEL_LOW | GPIO_INTR_LEVEL_HIGH)) != 0;
- if (!is_level) {
- RK_GPIO_LOCK(sc);
- rk_gpio_write_4(sc, RK_GPIO_PORTA_EOI, 1u << pin);
- RK_GPIO_UNLOCK(sc);
- }
-
if (intr_isrc_dispatch(RK_GPIO_ISRC(sc, pin), tf)) {
/*
* Pin asserted but no consumer is registered for it
@@ -253,19 +235,14 @@ rk_gpio_intr(void *arg)
* messages per second. Mask the pin's IRQ at the
* controller and disable further dispatches; if a
* consumer attaches later it will re-enable through
- * pic_enable_intr / rk_gpio_pic_enable_intr. For
- * level pins also EOI now -- there is no consumer
- * to drive the source low.
+ * pic_enable_intr / rk_gpio_pic_enable_intr.
*/
RK_GPIO_LOCK(sc);
rk_gpio_write_bit(sc, RK_GPIO_INTMASK, pin, 1);
rk_gpio_write_bit(sc, RK_GPIO_INTEN, pin, 0);
- if (is_level)
- rk_gpio_write_4(sc, RK_GPIO_PORTA_EOI,
- 1u << pin);
RK_GPIO_UNLOCK(sc);
device_printf(sc->sc_dev,
- "Interrupt pin=%d unhandled -- masked\n", pin);
+ "Interrupt pin=%d unhandled — masked\n", pin);
continue;
}
@@ -954,37 +931,10 @@ rk_pic_post_ithread(device_t dev, struct intr_irqsrc *isrc)
struct rk_pin_irqsrc *rkisrc = (struct rk_pin_irqsrc *)isrc;
RK_GPIO_LOCK(sc);
- /*
- * Level pins: EOI now that the ithread has driven the source low,
- * then unmask so future level transitions can fire. Edge pins
- * already EOI'd in rk_gpio_intr before dispatch.
- */
- if (rkisrc->mode & (GPIO_INTR_LEVEL_LOW | GPIO_INTR_LEVEL_HIGH))
- rk_gpio_write_4(sc, RK_GPIO_PORTA_EOI, 1u << rkisrc->irq);
rk_gpio_write_bit(sc, RK_GPIO_INTMASK, rkisrc->irq, 0);
RK_GPIO_UNLOCK(sc);
}
-/*
- * Mirror image of pic_post_ithread for filter-only consumers: the MI
- * interrupt framework calls this after a filter returns FILTER_HANDLED
- * (no ithread). The filter is expected to have read+cleared the source
- * device's IRQ status itself, so the GPIO line is now low; we EOI the
- * level latch here. Edge pins are already EOI'd in rk_gpio_intr.
- */
-static void
-rk_pic_post_filter(device_t dev, struct intr_irqsrc *isrc)
-{
- struct rk_gpio_softc *sc = device_get_softc(dev);
- struct rk_pin_irqsrc *rkisrc = (struct rk_pin_irqsrc *)isrc;
-
- if ((rkisrc->mode & (GPIO_INTR_LEVEL_LOW | GPIO_INTR_LEVEL_HIGH)) == 0)
- return;
- RK_GPIO_LOCK(sc);
- rk_gpio_write_4(sc, RK_GPIO_PORTA_EOI, 1u << rkisrc->irq);
- RK_GPIO_UNLOCK(sc);
-}
-
static device_method_t rk_gpio_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, rk_gpio_probe),
@@ -1016,7 +966,6 @@ static device_method_t rk_gpio_methods[] = {
DEVMETHOD(pic_disable_intr, rk_pic_disable_intr),
DEVMETHOD(pic_enable_intr, rk_pic_enable_intr),
DEVMETHOD(pic_pre_ithread, rk_pic_pre_ithread),
- DEVMETHOD(pic_post_filter, rk_pic_post_filter),
DEVMETHOD(pic_post_ithread, rk_pic_post_ithread),
/* ofw_bus interface */