git: 98c44ccb01d9 - main - brcmfmac: deal with bus attachments to the module Makefile

The branch main has been updated by bz:

URL: https://cgit.FreeBSD.org/src/commit/?id=98c44ccb01d9461da477ec8d784c763e4d03fb36

commit 98c44ccb01d9461da477ec8d784c763e4d03fb36
Author:     Bjoern A. Zeeb <bz@FreeBSD.org>
AuthorDate: 2026-02-09 01:08:42 +0000
Commit:     Bjoern A. Zeeb <bz@FreeBSD.org>
CommitDate: 2026-02-10 21:42:53 +0000

    brcmfmac: deal with bus attachments to the module Makefile
    
    As with LinuxKPI-based wireless drivers, e.g., rtw88, PCI depends
    on PCI being compiled into the kernel, SDIO will depend on
    MMCCAM in the kernel once supported, and USB can always be
    loaded.
    
    Sponsored by:   The FreeBSD Foundation
    MFC after:      3 days
---
 sys/modules/brcm80211/brcmfmac/Makefile | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/sys/modules/brcm80211/brcmfmac/Makefile b/sys/modules/brcm80211/brcmfmac/Makefile
index 67955c96db53..b0c4d75a3d17 100644
--- a/sys/modules/brcm80211/brcmfmac/Makefile
+++ b/sys/modules/brcm80211/brcmfmac/Makefile
@@ -3,7 +3,7 @@ DEVDIR=	${SRCTOP}/sys/contrib/dev/broadcom/brcm80211/brcmfmac
 .PATH:	${DEVDIR}
 
 # Should split this up into a core driver and 3 more
-WITH_PCIE=1
+WITH_PCI=1
 WITH_SDIO=0
 WITH_USB=0
 
@@ -20,21 +20,24 @@ SRCS+=	fweh.c fwil.c fwvid.c p2p.c pno.c proto.c vendor.c xtlv.c
 
 SRCS+=	wcc/core.c cyw/core.c bca/core.c
 
-.if defined(WITH_PCIE) && ${WITH_PCIE} > 0
-CFLAGS+=	-DCONFIG_BRCMFMAC_PCIE=1
+# PCI parts; PCI needs to be compiled into the kernel and cannot be loaded.
+.if defined(WITH_PCI) && ${WITH_PCI} > 0 && ${KERN_OPTS:MDEV_PCI}
 SRCS+=	pcie.c msgbuf.c commonring.c flowring.c
+CFLAGS+=	-DCONFIG_BRCMFMAC_PCIE=1
 .endif
 
-.if defined(WITH_SDIO) && ${WITH_SDIO} > 0
-CFLAGS+=	-DCONFIG_BRCMFMAC_SDIO=1
+# SDIO parts; SDIO depends on an MMCCAM kernel.
+.if defined(WITH_SDIO) && ${WITH_SDIO} > 0 && ${KERN_OPTS:MMMCCAM}
 SRCS+=	sdio.c bcmsdh.c
 SRCS+=	sdio_if.h
 SRCS+=	sdiodevs.h
+CFLAGS+=	-DCONFIG_BRCMFMAC_SDIO=1
 .endif
 
+# USB parts; USB can be loaded and is unconditional on any kernel config.
 .if defined(WITH_USB) && ${WITH_USB} > 0
-CFLAGS+=	-DCONFIG_BRCMFMAC_USB=1
 SRCS+=	usb.c
+CFLAGS+=	-DCONFIG_BRCMFMAC_USB=1
 .endif
 
 .if (defined(WITH_SDIO) && ${WITH_SDIO} > 0) || \
@@ -74,7 +77,7 @@ CFLAGS+=	${LINUXKPI_INCLUDES}
 CFLAGS+=	-ferror-limit=0
 
 #CFLAGS+=	-DCONFIG_BRCM_TRACING=${WITH_TRACING}
-CFLAGS+=	-DCONFIG_BRCMFMAC_PROTO_MSGBUF=${WITH_PCIE}
+CFLAGS+=	-DCONFIG_BRCMFMAC_PROTO_MSGBUF=${WITH_PCI}
 CFLAGS+=	-DCONFIG_BRCMDBG=${WITH_DEBUG}
 
 #CFLAGS+=	-DCONFIG_DMI=${WITH_DMI}