Re: git: 54c62e3e5d8c - main - pf: work around icmp6 packet-too-big not being sent when binat-ing
- Reply: Kristof Provost : "Re: git: 54c62e3e5d8c - main - pf: work around icmp6 packet-too-big not being sent when binat-ing"
- In reply to: Kristof Provost : "git: 54c62e3e5d8c - main - pf: work around icmp6 packet-too-big not being sent when binat-ing"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Tue, 23 Jan 2024 18:32:46 UTC
On Mon, 22 Jan 2024 13:52:51 +0100, Kristof Provost wrote:
>
> The branch main has been updated by kp:
>
> URL: https://cgit.FreeBSD.org/src/commit/?id=54c62e3e5d8cd90c5571a1d4c8c5f062d580480e
>
> commit 54c62e3e5d8cd90c5571a1d4c8c5f062d580480e
> Author: Kristof Provost <kp@FreeBSD.org>
> AuthorDate: 2024-01-17 17:11:27 +0000
> Commit: Kristof Provost <kp@FreeBSD.org>
> CommitDate: 2024-01-22 11:52:14 +0000
>
> pf: work around icmp6 packet-too-big not being sent when binat-ing
>
> If we're applying NPTv6 we pass a packet with a modified source and/or
> destination address to the network stack.
>
> If that packet then turns out to be larger than the MTU of the sending
> interface the stack will attempt to generate an icmp6 packet-too-big
> error, but may fail to look up the appropriate source address for that
> error message. Even if it does, pf would still have to undo the binat
> operation inside the icmp6 packet so the sending host can make sense of
> the error.
>
> We can avoid both problems entirely by having pf also perform the MTU
> check (taking the potential refragmentation into account), and
> generating the icmp6 error directly in pf.
>
> See also: https://redmine.pfsense.org/issues/14290
> Sponsored by: Rubicon Communications, LLC ("Netgate")
> Differential Revision: https://reviews.freebsd.org/D43499
> ---
> sys/net/pfvar.h | 1 +
> sys/netpfil/pf/pf.c | 12 ++++++++++++
> sys/netpfil/pf/pf_norm.c | 15 +++++++++++++++
> 3 files changed, 28 insertions(+)
Does this change cause problems for others too?
- ssh over IPv6 permanently disconnecting
(client_loop: send disconnect: Broken pipe)
- ssh connections over IPv6 hanging
- git pull not working
Fssh_ssh_dispatch_run_fatal: Connection to 2604:1380:4091:a001::24ca:1 port 22: Permission denied
fatal: Could not read from remote repository.
Thanks.
--
Herbert