git: b739bc986099 - main - sys/conf/NOTES: clean up whitespace
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 25 Feb 2023 15:27:28 UTC
The branch main has been updated by karels:
URL: https://cgit.FreeBSD.org/src/commit/?id=b739bc986099cbf9dcb355088af8cefeaed42d17
commit b739bc986099cbf9dcb355088af8cefeaed42d17
Author: Mike Karels <karels@FreeBSD.org>
AuthorDate: 2023-02-25 14:04:00 +0000
Commit: Mike Karels <karels@FreeBSD.org>
CommitDate: 2023-02-25 15:27:06 +0000
sys/conf/NOTES: clean up whitespace
Most options in kernel config files use "options<space><tab>OPTION".
This allows the option to be commented out without shifting columns.
A few options had two tabs, and some had spaces. Make them consistent.
I missed this file on the last pass.
---
sys/conf/NOTES | 70 +++++++++++++++++++++++++++++-----------------------------
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index f6a85c80f034..6d79905967aa 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -228,7 +228,7 @@ options SMP # Symmetric MultiProcessor Kernel
# kernel startup process (before devices are probed) rather than at the
# end. This is a temporary option for use during the transition from
# late to early AP startup.
-options EARLY_AP_STARTUP
+options EARLY_AP_STARTUP
# MAXCPU defines the maximum number of CPUs that can boot in the system.
# A default value should be already present, for every architecture.
@@ -439,17 +439,17 @@ options SYSCTL_DEBUG
#
# Enable textdump by default, this disables kernel core dumps.
#
-options TEXTDUMP_PREFERRED
+options TEXTDUMP_PREFERRED
#
# Enable extra debug messages while performing textdumps.
#
-options TEXTDUMP_VERBOSE
+options TEXTDUMP_VERBOSE
#
# NO_SYSCTL_DESCR omits the sysctl node descriptions to save space in the
# resulting kernel.
-options NO_SYSCTL_DESCR
+options NO_SYSCTL_DESCR
#
# MALLOC_DEBUG_MAXZONES enables multiple uma zones for malloc(9)
@@ -485,7 +485,7 @@ options DEBUG_REDZONE
# it is not defined. It is commented out here because this feature
# isn't generally available. And the required eputc() isn't defined.
#
-#options EARLY_PRINTF
+#options EARLY_PRINTF
#
# KTRACE enables the system-call tracing facility ktrace(2). To be more
@@ -674,9 +674,9 @@ options ROUTETABLES=2 # allocated fibs up to 65536. default is 1.
# but that would be a bad idea as they are large.
options TCP_OFFLOAD # TCP offload support.
-options TCP_RFC7413 # TCP Fast Open
+options TCP_RFC7413 # TCP Fast Open
-options TCPHPTS
+options TCPHPTS
makeoptions WITH_EXTRA_TCP_STACKS=1 # RACK and BBR TCP kernel modules
# In order to enable IPSEC you MUST also add device crypto to
@@ -686,15 +686,15 @@ options IPSEC #IP security (requires device crypto)
# Option IPSEC_SUPPORT does not enable IPsec, but makes it possible to
# load it as a kernel module. You still MUST add device crypto to your kernel
# configuration.
-options IPSEC_SUPPORT
+options IPSEC_SUPPORT
#options IPSEC_DEBUG #debug for IP security
# TLS framing and encryption/decryption of data over TCP sockets.
-options KERN_TLS # TLS transmit and receive offload
+options KERN_TLS # TLS transmit and receive offload
# Netlink kernel/user<>kernel/user messaging interface
-options NETLINK
+options NETLINK
#
# SMB/CIFS requester
@@ -851,8 +851,8 @@ options NGATM_UNI
options NGATM_CCATM
# Network stack virtualization.
-options VIMAGE
-options VNET_DEBUG # debug for VIMAGE
+options VIMAGE
+options VNET_DEBUG # debug for VIMAGE
#
# Network interfaces:
@@ -1165,7 +1165,7 @@ options MD_ROOT
options MD_ROOT_READONLY
# Allow to read MD image from external memory regions
-options MD_ROOT_MEM
+options MD_ROOT_MEM
# Disk quotas are supported when this option is enabled.
options QUOTA #enable disk quotas
@@ -1411,8 +1411,8 @@ options SCSI_NO_SENSE_STRINGS
options SCSI_NO_OP_STRINGS
options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device
options CAM_IOSCHED_DYNAMIC
-options CAM_IO_STATS
-options CAM_TEST_FAILURE
+options CAM_IO_STATS
+options CAM_TEST_FAILURE
# Options for the CAM CDROM driver:
# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
@@ -1493,14 +1493,14 @@ options PCI_IOV # PCI SR-IOV support
# These options are valid for other keyboard drivers as well.
options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
-options KBD_INSTALL_CDEV # install a CDEV entry in /dev
+options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# Define keyboard latency (try 200/15 for a snappy interactive console)
-options KBD_DELAY1=500 # define initial key delay
-options KBD_DELAY2=100 # define key delay
+options KBD_DELAY1=500 # define initial key delay
+options KBD_DELAY2=100 # define key delay
device kbdmux # keyboard multiplexer
-options KBDMUX_DFLT_KEYMAP # specify the built-in keymap
+options KBDMUX_DFLT_KEYMAP # specify the built-in keymap
makeoptions KBDMUX_DFLT_KEYMAP=it.iso
options FB_DEBUG # Frame buffer debugging
@@ -1511,17 +1511,17 @@ options TEKEN_UTF8 # UTF-8 output handling
# The vt video console driver.
device vt
-options VT_ALT_TO_ESC_HACK=1 # Prepend ESC sequence to ALT keys
-options VT_MAXWINDOWS=16 # Number of virtual consoles
-options VT_TWOBUTTON_MOUSE # Use right mouse button to paste
+options VT_ALT_TO_ESC_HACK=1 # Prepend ESC sequence to ALT keys
+options VT_MAXWINDOWS=16 # Number of virtual consoles
+options VT_TWOBUTTON_MOUSE # Use right mouse button to paste
# The following options set the maximum framebuffer size.
-options VT_FB_MAX_HEIGHT=480
-options VT_FB_MAX_WIDTH=640
+options VT_FB_MAX_HEIGHT=480
+options VT_FB_MAX_WIDTH=640
# The following options will let you change the default vt terminal colors.
-options TERMINAL_NORM_ATTR=(FG_GREEN|BG_BLACK)
-options TERMINAL_KERN_ATTR=(FG_LIGHTRED|BG_BLACK)
+options TERMINAL_NORM_ATTR=(FG_GREEN|BG_BLACK)
+options TERMINAL_KERN_ATTR=(FG_LIGHTRED|BG_BLACK)
#
# Optional devices:
@@ -1998,7 +1998,7 @@ device ath_hal # pci/cardbus chip support
# for this work around, but without it things don't work at all. The DMA
# from the card usually bursts 128 bytes, but on the affected CPUs, only
# 4 are safe.
-options AH_RXCFG_SDMAMW_4BYTES
+options AH_RXCFG_SDMAMW_4BYTES
#device ath_ar9160 # AR9160 chips
#device ath_ar9280 # AR9280 chips
#device ath_ar9285 # AR9285 chips
@@ -2144,13 +2144,13 @@ envvar hint.gusc.0.flags="0x13"
# SND_OLDSTEREO Only 2 channels are allowed, effectively
# disabling multichannel processing.
#
-options SND_DEBUG
-options SND_DIAGNOSTIC
-options SND_FEEDER_MULTIFORMAT
-options SND_FEEDER_FULL_MULTIFORMAT
-options SND_FEEDER_RATE_HP
-options SND_PCM_64
-options SND_OLDSTEREO
+options SND_DEBUG
+options SND_DIAGNOSTIC
+options SND_FEEDER_MULTIFORMAT
+options SND_FEEDER_FULL_MULTIFORMAT
+options SND_FEEDER_RATE_HP
+options SND_PCM_64
+options SND_OLDSTEREO
#
# Cardbus
@@ -2787,7 +2787,7 @@ options GZIO
options ZSTDIO
# BHND(4) drivers
-options BHND_LOGLEVEL # Logging threshold level
+options BHND_LOGLEVEL # Logging threshold level
# evdev interface
device evdev # input event device support