git: 6f3c0d2764f2 - main - Default to always accepting the PHY that's present. Linux did something similar a while back, and there are devices in the wild that otherwise won't attach. This patch is temporary until the PHY code is further cleared up.

The branch main has been updated by scottl:

URL: https://cgit.FreeBSD.org/src/commit/?id=6f3c0d2764f230444818a95009028861493c1594

commit 6f3c0d2764f230444818a95009028861493c1594
Author:     Scott Long <scottl@FreeBSD.org>
AuthorDate: 2022-02-27 01:29:08 +0000
Commit:     Scott Long <scottl@FreeBSD.org>
CommitDate: 2022-02-27 01:29:08 +0000

    Default to always accepting the PHY that's present.  Linux did
    something similar a while back, and there are devices in the wild
    that otherwise won't attach.  This patch is temporary until the
    PHY code is further cleared up.
    
    Obtained from: grehan
---
 sys/dev/igc/igc_i225.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/sys/dev/igc/igc_i225.c b/sys/dev/igc/igc_i225.c
index 4c50daa16b79..95d7d1536184 100644
--- a/sys/dev/igc/igc_i225.c
+++ b/sys/dev/igc/igc_i225.c
@@ -172,14 +172,12 @@ static s32 igc_init_phy_params_i225(struct igc_hw *hw)
 	/* Verify phy id and set remaining function pointers */
 	switch (phy->id) {
 	case I225_I_PHY_ID:
+	default:
 		phy->type		= igc_phy_i225;
 		phy->ops.set_d0_lplu_state = igc_set_d0_lplu_state_i225;
 		phy->ops.set_d3_lplu_state = igc_set_d3_lplu_state_i225;
 		/* TODO - complete with GPY PHY information */
 		break;
-	default:
-		ret_val = -IGC_ERR_PHY;
-		goto out;
 	}
 
 out: