git: fa4d25f5b457 - main - retire sconfig(8) ce(4)/cp(4) configuration tool
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Tue, 13 Dec 2022 20:26:52 UTC
The branch main has been updated by emaste:
URL: https://cgit.FreeBSD.org/src/commit/?id=fa4d25f5b4573a54eebeb7f254b52153b8d3811e
commit fa4d25f5b4573a54eebeb7f254b52153b8d3811e
Author: Ed Maste <emaste@FreeBSD.org>
AuthorDate: 2022-12-13 20:07:46 +0000
Commit: Ed Maste <emaste@FreeBSD.org>
CommitDate: 2022-12-13 20:25:13 +0000
retire sconfig(8) ce(4)/cp(4) configuration tool
The ce(4) and cp(4) drivers have been retired.
Differential Revision: https://reviews.freebsd.org/D33469
---
ObsoleteFiles.inc | 2 +
rescue/rescue/Makefile | 2 +-
sbin/Makefile.amd64 | 1 -
sbin/Makefile.i386 | 1 -
sbin/sconfig/Makefile | 10 -
sbin/sconfig/Makefile.depend | 15 -
sbin/sconfig/sconfig.8 | 614 ----------------
sbin/sconfig/sconfig.c | 1212 -------------------------------
targets/pseudo/userland/Makefile.depend | 1 -
9 files changed, 3 insertions(+), 1855 deletions(-)
diff --git a/ObsoleteFiles.inc b/ObsoleteFiles.inc
index c24435c8e6a3..be9f81dd3cb0 100644
--- a/ObsoleteFiles.inc
+++ b/ObsoleteFiles.inc
@@ -53,8 +53,10 @@
# done
# 20221213: remove sync serial drivers and utilities
+OLD_FILES+=sbin/sconfig
OLD_FILES+=usr/share/man/man4/ce.4
OLD_FILES+=usr/share/man/man4/cp.4
+OLD_FILES+=usr/share/man/man8/sconfig.8.gz
# 20221202: remove trpt(8)
OLD_FILES+=usr/sbin/trpt
diff --git a/rescue/rescue/Makefile b/rescue/rescue/Makefile
index cc4c13c0a624..f6ff701f4c54 100644
--- a/rescue/rescue/Makefile
+++ b/rescue/rescue/Makefile
@@ -160,7 +160,7 @@ CRUNCH_LIBS+= -lmd
CRUNCH_LIBS+= -lmt -lsbuf -lufs -lz
.if ${MACHINE_CPUARCH} == "i386"
-CRUNCH_PROGS_sbin+= bsdlabel sconfig fdisk
+CRUNCH_PROGS_sbin+= bsdlabel fdisk
CRUNCH_ALIAS_bsdlabel= disklabel
#CRUNCH_PROGS+= mount_smbfs
#CRUNCH_LIBS+= -lsmb
diff --git a/sbin/Makefile.amd64 b/sbin/Makefile.amd64
index 4135c44082c9..2d231b0cb2b0 100644
--- a/sbin/Makefile.amd64
+++ b/sbin/Makefile.amd64
@@ -2,4 +2,3 @@
SUBDIR += bsdlabel
SUBDIR += fdisk
-SUBDIR += sconfig
diff --git a/sbin/Makefile.i386 b/sbin/Makefile.i386
index 4135c44082c9..2d231b0cb2b0 100644
--- a/sbin/Makefile.i386
+++ b/sbin/Makefile.i386
@@ -2,4 +2,3 @@
SUBDIR += bsdlabel
SUBDIR += fdisk
-SUBDIR += sconfig
diff --git a/sbin/sconfig/Makefile b/sbin/sconfig/Makefile
deleted file mode 100644
index 8617eaf4b1cc..000000000000
--- a/sbin/sconfig/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# Cronyx Id: sbin.sconfig.Makefile,v 1.1.4.1 2003/02/17 12:51:24 rik Exp $
-# $FreeBSD$
-
-PACKAGE=utilities
-PROG= sconfig
-MAN= sconfig.8
-WARNS?= 2
-CFLAGS+= -I${SRCTOP}/sys/dev/cp
-
-.include <bsd.prog.mk>
diff --git a/sbin/sconfig/Makefile.depend b/sbin/sconfig/Makefile.depend
deleted file mode 100644
index c729e17c52db..000000000000
--- a/sbin/sconfig/Makefile.depend
+++ /dev/null
@@ -1,15 +0,0 @@
-# $FreeBSD$
-# Autogenerated - do NOT edit!
-
-DIRDEPS = \
- include \
- include/xlocale \
- lib/${CSU_DIR} \
- lib/libc \
-
-
-.include <dirdeps.mk>
-
-.if ${DEP_RELDIR} == ${_DEP_RELDIR}
-# local dependencies - needed for -jN in clean tree
-.endif
diff --git a/sbin/sconfig/sconfig.8 b/sbin/sconfig/sconfig.8
deleted file mode 100644
index 67d613202a92..000000000000
--- a/sbin/sconfig/sconfig.8
+++ /dev/null
@@ -1,614 +0,0 @@
-.\" Copyright (c) 2002-2004 Roman Kurakin <rik@cronyx.ru>
-.\" Copyright (c) 2002-2004 Cronyx Engineering
-.\" All rights reserved.
-.\"
-.\" This software is distributed with NO WARRANTIES, not even the implied
-.\" warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-.\"
-.\" Authors grant any other persons or organisations a permission to use,
-.\" modify and redistribute this software in source and binary forms,
-.\" as long as this message is kept with the software, all derivative
-.\" works or modified versions.
-.\"
-.\" $FreeBSD$
-.Dd December 13, 2022
-.Dt SCONFIG 8 i386
-.Os
-.Sh NAME
-.Nm sconfig
-.Nd "channel configuration utility for Cronyx adapters"
-.Sh SYNOPSIS
-.Nm
-.Op Fl aimsxeftuc
-.Op Ar device
-.Op Ar data_rate_options
-.Op Ar protocol_options ...
-.Op Ar interface_options ...
-.Sh DEPRECATION NOTICE
-The
-.Nm
-utility is not present in
-.Fx 14.0
-and later.
-.Sh DESCRIPTION
-The
-.Nm
-utility is used for configuring the channel options of the Cronyx
-adapters.
-In asynchronous mode, all parameters should be set using the standard
-.Xr stty 1
-utility.
-With
-.Nm ,
-it is only possible to set some of them (see below).
-.Pp
-Some of the options can be set only on free channels,
-that is when the corresponding network interface is in the
-.Cm down
-state in the synchronous mode,
-and the terminal device
-.Pa /dev/tty*
-is closed in asynchronous mode.
-.Pp
-Other channel options can be changed
-.Dq "on the fly" .
-Generally, the channel options are set up during the operating system startup,
-for example, from the
-.Pa /etc/rc
-script.
-.Pp
-Note that not all options make sense in every particular case,
-and an attempt to set some of them may hung up the channel
-or the whole adapter.
-.\"--------------------------------------------------------------
-.Ss "Information Options"
-Only one of these options can be specified.
-If information option is specified,
-.Nm
-will show the corresponding information and will ignore all other options,
-except
-.Ar device .
-See also the description of the
-.Ar device
-argument.
-.Bl -tag -width indent
-.It <none>
-This will show settings of the channel.
-.It Fl a
-Print all settings of the channel.
-.It Fl i
-Print interface settings, equal to the output of the
-.Xr ifconfig 8
-utility.
-.It Fl m
-Print modem signal status.
-The description of all signals can be found in any modem documentation.
-Only LE signal should be described.
-If this signal is ON then the channel is busy.
-If it is OFF then the channel is free.
-.It Fl s
-Print brief channel statistics.
-This is the generic statistics,
-see also the
-.Fl x , e , f , t ,
-and
-.Fl u
-options.
-For a description of the output, see below.
-.Pp
-This statistics is very useful if something goes wrong.
-For example, if all interrupt counters are zero then the device
-was configured to use an interrupt that was not registered in the
-BIOS for use with the ISA bus.
-.It Fl x
-Print full channel statistics.
-This options prints additional counters,
-but with less precision than with the
-.Fl s
-option.
-.It Fl e
-Print brief E1/G703 statistics.
-If this option is selected, the
-statistics accumulated over the last 15 minutes is printed.
-For a description of the output, see below.
-.It Fl f
-Print full E1/G703 statistics.
-This option shows all E1/G703 statistics that the
-.Fl e
-option shows,
-plus total statistics for the whole period of time and statistics for
-last 24 hours (if available).
-For a description of the output, see below.
-.It Fl t
-Print brief E3/T3/STS-1 statistics.
-If this option is selected, the
-statistics accumulated over the last 15 minutes is printed.
-For a description of the output, see below.
-.It Fl u
-Print full E3/T3/STS-1 statistics.
-This option shows all E3/T3/STS-1 statistics that the
-.Fl t
-option shows,
-plus total statistics for the whole period of time and statistics for
-last 24 hours (if available).
-For a description of the output, see below.
-.It Fl c
-Cleans all kind of statistics.
-.El
-.\"--------------------------------------------------------------
-.Ss "Device Selection"
-The device is selected using the name of the network interface,
-as shown by
-.Xr ifconfig 8 .
-The channel number depends on the order the drivers were loaded into the system.
-Sometimes people confuse channel number and adapter number because of the
-same spelling.
-The adapter number appears in the kernel context, while the channel number
-is in the configuration context.
-.Bl -tag -width indent
-.It <none>
-If the device name is omitted,
-.Nm
-will print information about all channels of all Cronyx adapters
-available in the system.
-If some settings need to be made, the device name must be specified.
-.It Li cx Ns Ar ##
-This is the channel name for the Sigma family of Cronyx adapters.
-(ISA bus.)
-.It Li ct Ns Ar ##
-This is the channel name for the Tau family of Cronyx adapters.
-(ISA bus.)
-.It Li cp Ns Ar ##
-This is the channel name for the Tau-PCI family of Cronyx adapters.
-(PCI bus.)
-.It Li ce Ns Ar ##
-This is the channel name for the Tau32-PCI family of Cronyx adapters.
-(PCI bus.)
-.El
-.\"--------------------------------------------------------------
-.Ss "Data Rate Options"
-.Bl -tag -width indent
-.It Ar value
-A non-zero value will set the data rate to a given value
-in asynchronous mode,
-and will set the data rate and internal clock source of synchronization
-in synchronous mode.
-A zero value is equivalent to specifying the
-.Cm extclock
-option.
-The transmitted data (TxD) are synchronized using the internal on-board timing
-generator, the internally generated timing signal is driven on the TXCOUT pin,
-and the signal on the TXCIN pin is ignored.
-This mode is used for direct
-terminal-to-terminal communication, e.g., when connecting two computers together
-in synchronous mode with a relatively short cable.
-This method should also be
-used for testing channels with an external loopback connector.
-.It Cm extclock
-Set the external timing clock source for synchronous channels.
-External clock mode is the most commonly used method for connecting
-external modem hardware.
-In this mode,
-the external timing signal is received on the TXCIN pin of the connector,
-and it is used as a synchronization clock for transmitting data (TxD).
-.Pp
-Note: in
-.Cm extclock
-mode, the device cannot determine the value of the external timing clock
-since it does not have the built-in clock gauge.
-.El
-.\"--------------------------------------------------------------
-.Ss "Protocol Options"
-Note: these option can only be used on a free channel, and they require
-specifying the device name.
-.Bl -tag -width indent
-.It Cm async
-(Only for Sigma family.)
-Select the asynchronous protocol (or mode).
-In this mode, Cronyx adapters behave as normal serial devices,
-and standard serial communications utilities can be used to
-work with them.
-All asynchronous settings should be set using the standard
-serial communications configuration utilities, e.g.,
-.Xr stty 1 .
-With
-.Nm ,
-it is only possible to set some of them.
-.It Cm cisco
-Select the Cisco HDLC synchronous protocol.
-.It Cm fr
-Select the Frame Relay synchronous protocol
-.Tn ( ANSI
-T1.617 Annex D).
-.It Cm ppp
-Select the synchronous PPP protocol.
-.It Sm Cm keepalive No = Bro Cm on , off Brc Sm
-Turn on/off transmission of keepalive messages.
-This option is used only for synchronous PPP.
-If this option is
-.Cm on ,
-PPP will periodically send ECHO-REQUEST messages.
-If it will not receive any ECHO-REPLY messages for
-some (definite) period of time it will break the connection.
-It is used for tracking the line state.
-.It Cm idle
-This mode is reported when using Netgraph.
-An actual protocol depends on the type of a connected Netgraph node,
-and it cannot be changed with
-.Nm .
-.El
-.\"--------------------------------------------------------------
-.Ss "Interface Options"
-Not all of these options can be set on a busy channel, and not all of them
-are applicable to all kinds of adapters/channels.
-For all dual-state options,
-.Cm off
-is the default value.
-None of these options can be used in the asynchronous mode,
-except for the
-.Cm debug
-option.
-.Bl -tag -width indent
-.It Sm Cm port No = Bro Cm rs232 , v35 , rs449 Brc Sm
-Set the port type for old Sigma models.
-.It Sm Cm cfg No = Bro Cm A , B , C Brc Sm
-Set the configuration for the adapter.
-This option can be used only with Tau/E1
-and Tau/G703 adapters, and only if all channels are free.
-.Bl -tag -width ".Cm cfg Ns = Ns Cm A"
-.It Cm cfg Ns = Ns Cm A
-Two independent E1/G703 channels.
-This is the default setting.
-.It Cm cfg Ns = Ns Cm B
-(Only for ISA models.)
-For Tau/G703 this means one G703 channel and one digital channel.
-For Tau/E1, the first physical channel is divided into two subchannels.
-One of them goes to the first logical channel, another one goes to the
-second physical channel.
-Second (logical) channel is the digital channel.
-.It Cm cfg Ns = Ns Cm C
-(Only for E1 models.)
-In this mode, first
-physical channel consists of three data flows.
-Two of them go to the two (logical) channels.
-The last one goes to the second physical channel.
-On newer models (Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1),
-this programs the hardware to use a single source of synchronization
-and pass all unused (in both channels) timeslots from
-one channel to another.
-.El
-.Pp
-For a detailed description of available configuration modes,
-see the adapter documentation.
-This option cannot be set on a busy channel.
-.It Sm Cm loop No = Bro Cm on , off Brc Sm
-Turn on/off internal loopback.
-This mode is useful for debugging.
-When this mode is
-.Cm on ,
-some data should be sent.
-If no interrupts are generated, chances are that
-the corresponding IRQ configuration entry in the BIOS
-was not switched from
-.Dq Li "PCI/ISA PNP"
-to
-.Dq Li "Legacy ISA" .
-.It Sm Cm rloop No = Bro Cm on , off Brc Sm
-(Only for Tau32-PCI and Tau-PCI/E3.)
-Turn on/off remote loopback feature.
-This mode is also useful for debugging.
-.It Sm Cm dpll No = Bro Cm on , off Brc Sm
-Turn on/off digital phase locked loop mode (DPLL).
-When enabled, the receiver
-timing clock signal is derived from the received data.
-Must be used with the NRZI
-encoding to avoid the synchronization loss.
-.It Sm Cm nrzi No = Bro Cm on , off Brc Sm
-Turn on/off NRZI encoding.
-If
-.Cm off ,
-NRZ encoding is used.
-.Bl -tag -width "NRZI"
-.It NRZ
-The zero bit is transmitted by the zero signal level,
-the one bit is transmitted by the positive signal level.
-.It NRZI
-The zero bit is transmitted by the change of the signal
-level, the one bit is by the constant signal level.
-Commonly used with the
-.Cm dpll Ns = Ns Cm on
-option.
-.El
-.It Sm Cm invclk No = Bro Cm on , off Brc Sm
-(Tau and Tau-PCI only.)
-Invert both the transmit and receive clock signals.
-.It Sm Cm invrclk No = Bro Cm on , off Brc Sm
-(Tau-PCI only.)
-Invert the receive clock signals.
-.It Sm Cm invtclk No = Bro Cm on , off Brc Sm
-(Tau-PCI only.)
-Invert the transmit clock signals.
-.It Sm Cm higain No = Bro Cm on , off Brc Sm
-(E1 only.)
-In off state the sensitivity is -12 dB.
-Turn on/off increasing the E1 receiver's non-linear sensitivity to -30dB.
-This allows increasing of the line distance.
-.It Sm Cm cablen No = Bro Cm on , off Brc Sm
-(Tau-PCI/T3 and Tau-PCI/STS-1 only.)
-Turn on/off adjusting of the transmit signal for a long cable T3/STS-1.
-.It Sm Cm monitor No = Bro Cm on , off Brc Sm
-(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.)
-Turn on/off increasing of the E1 receiver's linear sensitivity to -30dB.
-This can be used for the interception purposes.
-.It Sm Cm phony No = Bro Cm on , off Brc Sm
-(Tau32-PCI and Tau-PCI E1 family only.)
-Turn on/off the so-called
-.Dq phony
-mode.
-This mode allows
-receiving raw CEPT frames from the E1 line.
-Raw frames can be accessed, for example, with the raw protocol.
-Packets would come at a rate of 500 frames per second
-with length
-.No 16* Ns Ar N
-(for Tau-PCI/E1 model), where
-.Ar N
-is the number of timeslots.
-For
-Tau-PCI/2E1 and Tau-PCI/4E1,
-.Ar N
-should be equal to 32 regardless of the number of
-used timeslots.
-.It Sm Cm unfram No = Bro Cm on , off Brc Sm
-(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.)
-Turn on/off unframed mode.
-.Bl -tag -width ".Cm unfram Ns = Ns Cm off"
-.It Cm unfram Ns = Ns Cm on
-Switch channel to the unframed G.703 mode.
-.It Cm unfram Ns = Ns Cm off
-Switch channel to the framed E1 (G.704) mode.
-.El
-.It Sm Cm scrambler No = Bro Cm on , off Brc Sm
-(Tau32-PCI, Tau-PCI/G.703, Tau-PCI/2E1, and
-Tau-PCI/4E1 in unframed mode only.)
-Turn on/off scrambling of the G.703 data.
-.It Sm Cm use16 No = Bro Cm on , off Brc Sm
-(Tau32-PCI and Tau-PCI E1 family only.)
-Turn on/off the usage of the 16th timeslot for data transmission.
-Normally, the 16th timeslot is used for signalling information
-(multiframing CAS).
-.It Sm Cm crc4 No = Bro Cm on , off Brc Sm
-(E1 only.)
-Turn on/off CRC4 superframe mode.
-.It Sm Cm syn No = Bro Cm int , rcv , rcv0 , rcv1 , rcv2 , rcv3 Brc Sm
-.Bl -tag -width ".Cm rcv3"
-.It Cm int
-Use an internal clock generator for G703 transmitter
-(clock master).
-.It Cm rcv
-Use the G703 receiver data clock as the transmit clock
-(clock slave).
-.It Cm rcv0 , rcv1 , rcv2 , rcv3
-Use the G703 receiver clock of the other channel
-(E1 models only).
-.El
-.It Cm dir Ns = Ns Ar number
-(Tau32-PCI, Tau-PCI/2E1 and Tau-PCI/4E1 only.)
-Bind a logical channel to a physical channel.
-Using this parameter it is possible, for example, to split
-physical E1 channel into several logical channels.
-.It Cm ts Ns = Ns Ar interval
-(E1 only.)
-Set up the list of timeslots for use by the channel.
-The timeslots are numbered from 1 to 31,
-and are separated by a comma or a minus sign,
-giving an interval.
-Example:
-.Dq Li ts=1-3,5,17 .
-.It Cm pass Ns = Ns Ar interval
-(Tau/E1 only.)
-Set up the list of timeslots, translated to the E1 subchannel in
-.Cm cfg Ns = Ns Cm B
-and
-.Cm cfg Ns = Ns Cm C
-configurations.
-.It Sm Cm debug No = Bro Cm 0 , 1 , 2 Brc Sm
-Turn on/off debug messages.
-.Bl -tag -width 2n
-.It Cm 0
-Turn debug messages off.
-.It Cm 1
-Turn debug messages on, equivalent to the
-.Cm debug
-option of the
-.Xr ifconfig 8
-utility.
-.It Cm 2
-High intensive debug messages, for developers only.
-.El
-.El
-.\"--------------------------------------------------------------
-.Sh EXAMPLES
-Set up channel 1 for use with the HDSL modem or any other
-synchronous leased-line modem, and PPP/HDLC protocol (for Sigma):
-.Bd -literal -offset indent
-sconfig cx1 ppp extclock
-ifconfig cx1 158.250.244.2 158.250.244.1 up
-.Ed
-.Pp
-Set up channel 0 of Tau/E1 for use with the Cisco protocol
-over the E1 link, with a single virtual connection.
-The DLCI number is detected automatically.
-Use timeslots 1-10:
-.Bd -literal -offset indent
-sconfig ct0 cisco ts=1-10
-ifconfig ct0 158.250.244.2 158.250.244.1 up
-.Ed
-.Pp
-Set up channel 0 for the synchronous null-modem link to the nearby computer,
-internal clock source, 256000 bits/sec, protocol Cisco/HDLC (for Tau):
-.Bd -literal -offset indent
-sconfig ct0 cisco 256000
-ifconfig ct0 200.1.1.1 200.1.1.2 up
-.Ed
-.Pp
-Set up channel 1 for the leased line link using the data-only
-null-modem cable (or modems like Zelax+ M115).
-Synchronous DPLL mode, 128000
-bits/sec, protocol PPP/HDLC, NRZI encoding (for Sigma):
-.Bd -literal -offset indent
-sconfig cx1 ppp 128000 nrzi=on dpll=on
-ifconfig cx1 158.250.244.2 158.250.244.1 up
-.Ed
-.\"--------------------------------------------------------------
-.Sh DIAGNOSTICS
-This section contains a description of abbreviations used by
-.Nm
-while displaying various statistics.
-For a description of options related to
-statistics, please see above.
-.\"--------------------------------------------------------------
-.Ss Statistics
-When running, the driver gathers statistics about the channels, which
-can be accessed using the
-.Nm
-utility,
-or through the
-.Xr ioctl 2
-call
-.Dv SERIAL_GETSTAT .
-.Pp
-.Bl -tag -width indent -compact
-.It Va Rintr
-Total number of receive interrupts.
-.It Va Tintr
-Total number of transmit interrupts.
-.It Va Mintr
-Total number of modem interrupts.
-.It Va Ibytes
-Total bytes received.
-.It Va Ipkts
-Total packets received (for HDLC mode).
-.It Va Ierrs
-Number of receive errors.
-.It Va Obytes
-Total bytes transmitted.
-.It Va Opkts
-Total packets transmitted (for HDLC mode).
-.It Va Oerrs
-Number of transmit errors.
-.El
-.\"--------------------------------------------------------------
-.Ss E1/G.703 Statistics
-For E1 and G.703 channels, the SNMP-compatible statistics data are gathered
-(see RFC 1406).
-It can be accessed using the
-.Nm
-utility,
-or through the
-.Xr ioctl 2
-call
-.Dv SERIAL_GETESTAT .
-.Bl -tag -width ".Va RCRC Pq Va rcrce"
-.It Va Unav Pq Va uas
-Unavailable seconds: receiving all ones, loss of carrier, or loss of
-signal.
-.It Va Degr Pq Va dm
-Degraded minutes: having error rate more than 10E-6, not counting unavailable
-and severely errored seconds.
-.It Va Bpv Pq Va bpv
-HDB3 bipolar violation errors.
-.It Va Fsyn Pq Va fse
-Frame synchronization errors (E1 only).
-.It Va CRC Pq Va crce
-CRC4 errors (E1).
-.It Va RCRC Pq Va rcrce
-Remote CRC4 errors: E-bit counter (E1).
-.It Va Err Pq Va es
-Errored seconds: any framing errors, or out of frame sync, or any slip events.
-.It Va Lerr Pq Va les
-Line errored seconds: any BPV.
-.It Va Sev Pq Va ses
-Severely errored seconds: 832 or more framing errors, or 2048 or more bipolar
-violations.
-.It Va Bur Pq Va bes
-Bursty errored seconds: more than 1 framing error, but not severely errored.
-.It Va Oof Pq Va oofs
-Severely errored framing seconds: out of frame sync.
-.It Va Slp Pq Va css
-Controlled slip seconds: any slip buffer overflow or underflow.
-.El
-.\"--------------------------------------------------------------
-.Ss E1/G.703 Status
-The
-.Nm
-utility also prints the E1/G.703 channel status.
-The status can have the
-following values (non-exclusive):
-.Pp
-.Bl -tag -width ".Li FARLOMF" -compact
-.It Li Ok
-The channel is in a valid state, synchronized.
-.It Li LOS
-Loss of sync.
-.It Li AIS
-Receiving unframed all ones (E1 only).
-.It Li LOF
-Loss of framing (E1 only).
-.It Li LOMF
-Loss of multiframing (E1 only).
-.It Li FARLOF
-Receiving remote alarm (E1 only).
-.It Li AIS16
-Receiving all ones in the timeslot 16 (E1 only).
-.It Li FARLOMF
-Receiving distant multiframe alarm (E1 only).
-.It Li TSTREQ
-Receiving test request code (G.703 only).
-.It Li TSTERR
-Test error (G.703 only).
-.El
-.\"--------------------------------------------------------------
-.Sh SEE ALSO
-.Xr stty 1 ,
-.Xr ioctl 2 ,
-.Xr ifconfig 8 ,
-.Xr route 8 ,
-.\"--------------------------------------------------------------
-.Sh HISTORY
-The
-.Nm
-utility appeared in
-.Fx 5.2 .
-The
-.Nm
-utility is a replacement for the
-.Nm cxconfig
-and
-.Nm ctconfig
-utilities that were used in the past with
-.Fx
-drivers.
-Those two utilities and
-.Nm
-are not compatible,
-and therefore all scripts using them have to be rewritten.
-Moreover,
-.Tn Linux
-and
-.Fx
-versions of the
-.Nm
-utility are not fully compatible.
-.\"--------------------------------------------------------------
-.Sh AUTHORS
-.An Cronyx Engineering Aq Mt info@cronyx.ru
-.Pp
-.Pa http://www.cronyx.ru
-.\"--------------------------------------------------------------
-.Sh BUGS
-All software produced by Cronyx Engineering is thoroughly tested.
-But as created by a man, it can contain some bugs.
-If you have caught one, try to localize it and send an email with the
-description of the bug, and all operations that you have done.
-We will try to reproduce the error and fix it.
diff --git a/sbin/sconfig/sconfig.c b/sbin/sconfig/sconfig.c
deleted file mode 100644
index 48363036e412..000000000000
--- a/sbin/sconfig/sconfig.c
+++ /dev/null
@@ -1,1212 +0,0 @@
-/*
- * Channel configuration utility for Cronyx serial adapters.
- *
- * Copyright (C) 1997-2002 Cronyx Engineering.
- * Author: Serge Vakulenko, <vak@cronyx.ru>
- *
- * Copyright (C) 1999-2005 Cronyx Engineering.
- * Author: Roman Kurakin, <rik@cronyx.ru>
- *
- * This software is distributed with NO WARRANTIES, not even the implied
- * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Authors grant any other persons or organisations permission to use
- * or modify this software as long as this message is kept with the software,
- * all derivative works or modified versions.
- *
- * Cronyx Id: sconfig.c,v 1.4.2.2 2005/11/09 13:01:35 rik Exp $
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD$");
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <ctype.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include "cserial.h"
-
-#define MAXCHAN 128
-
-int vflag, eflag, sflag, mflag, cflag, fflag, iflag, aflag, xflag;
-int tflag, uflag;
-char mask[64];
-int adapter_type; /* 0-sigma, 1-tau, 2-taupci, 3-tau32 */
-char chan_name[16];
-
-static void
-usage (void)
-{
- printf(
-"Serial Adapter Configuration Utility\n"
-"Copyright (C) 1998-2005 Cronyx Engineering.\n"
-"See also man sconfig (8)\n"
-"Usage:\n"
-"\tsconfig [-aimsxeftuc] [device [parameters ...]]\n"
-"\n"
-"Options:\n"
-"\t<no options>\t\t -- print channel options\n"
-"\t-a\t\t\t -- print all settings of the channel\n"
-"\t-i\t\t\t -- print network interface status\n"
-"\t-m\t\t\t -- print modem signal status\n"
-"\t-s\t\t\t -- print channel statistics\n"
-"\t-x\t\t\t -- print extended channel statistics\n"
-"\t-e\t\t\t -- print short E1/G703 statistics\n"
-"\t-f\t\t\t -- print full E1/G703 statistics\n"
-"\t-t\t\t\t -- print short E3/T3/STS-1 statistics\n"
-"\t-u\t\t\t -- print full E3/T3/STS-1 statistics\n"
-"\t-c\t\t\t -- clear statistics\n"
-"\nParameters:\n"
-"\t<number>\t\t -- baud rate, internal clock\n"
-"\textclock\t\t -- external clock (default)\n"
-"\nProtocol options:\n"
-"\tasync\t\t\t -- asynchronous protocol\n"
-#ifdef __linux__
-"\tsync\t\t\t -- synchronous protocol\n"
-#endif
-"\tcisco\t\t\t -- Cisco/HDLC protocol\n"
-"\tfr\t\t\t -- Frame Relay protocol\n"
-#ifdef __linux__
-"\t dlci<number>\t -- Add new DLCI\n"
-#endif
-"\tppp\t\t\t -- PPP protocol\n"
-#ifdef __linux__
-"\trbrg\t\t\t -- Remote bridge\n"
-"\traw\t\t\t -- raw HDLC protocol\n"
-"\tpacket\t\t\t -- packetized HDLC protocol\n"
-"\tidle\t\t\t -- no protocol\n"
-#else
-"\t keepalive={on,of}\t -- Enable/disable keepalive\n"
-#endif
-"\nInterface options:\n"
-"\tport={rs232,v35,rs449}\t -- port type (for old models of Sigma)\n"
-"\tcfg={A,B,C}\t\t -- adapter configuration\n"
-"\tloop={on,off}\t\t -- internal loopback\n"
-"\trloop={on,off}\t\t -- remote loopback\n"
-"\tdpll={on,off}\t\t -- DPLL mode\n"
-"\tnrzi={on,off}\t\t -- NRZI encoding\n"
-"\tinvclk={on,off}\t\t -- invert receive and transmit clock\n"
-"\tinvrclk={on,off}\t -- invert receive clock\n"
-"\tinvtclk={on,off}\t -- invert transmit clock\n"
-"\thigain={on,off}\t\t -- E1 high non linear input sensitivity \n\t\t\t\t (long line)\n"
-"\tmonitor={on,off}\t -- E1 high linear input sensitivity \n\t\t\t\t (interception mode)\n"
-"\tphony={on,off}\t\t -- E1 telepnony mode\n"
-"\tunfram={on,off}\t\t -- E1 unframed mode\n"
-"\tscrambler={on,off}\t -- G.703 scrambling mode\n"
-"\tuse16={on,off}\t\t -- E1 timeslot 16 usage\n"
-"\tcrc4={on,off}\t\t -- E1 CRC4 mode\n"
-#ifdef __linux__
-"\tami={on,off}\t\t -- E1 AMI or HDB3 line code\n"
-"\tmtu={size}\t\t -- set MTU in bytes\n"
-#endif
-"\tsyn={int,rcv,rcvX}\t -- G.703 transmit clock\n"
-"\tts=...\t\t\t -- E1 timeslots\n"
-"\tpass=...\t\t -- E1 subchannel timeslots\n"
-"\tdir=<num>\t\t -- connect channel to link<num>\n"
-/*"\trqken={size}\t\t -- set receive queue length in packets\n"*/
-/*"\tcablen={on,off}\t\t -- T3/STS-1 high transmitter output for long cable\n"*/
-"\tdebug={0,1,2}\t\t -- enable/disable debug messages\n"
- );
- exit (0);
-}
-
-static unsigned long
-scan_timeslots (char *s)
-{
- char *e;
- long v;
- int i;
- unsigned long ts, lastv;
-
- ts = lastv = 0;
- for (;;) {
- v = strtol (s, &e, 10);
- if (e == s)
- break;
- if (*e == '-') {
- lastv = v;
- s = e+1;
- continue;
- }
- if (*e == ',')
- ++e;
-
- if (lastv)
- for (i=lastv; i<v; ++i)
- ts |= 1L << i;
- ts |= 1L << v;
-
- lastv = 0;
- s = e;
- }
- return ts;
-}
-
-static int
-ppp_ok (void)
-{
-#ifdef __linux__
- int s, p;
- struct ifreq ifr;
- char pttyname[32];
- char *p1, *p2;
- int i, j;
- int ppp_disc = N_PPP;
-
- /*
- * Open a socket for doing the ioctl operations.
- */
- s = socket (AF_INET, SOCK_DGRAM, 0);
- if (s < 0) {
- fprintf (stderr, "Error opening socket.\n");
- return 0;
- }
- strncpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
- if (ioctl (s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0) {
- /* Ok. */
- close (s);
- return 1;
- }
- close (s);
-
- /* open pseudo-tty and try to set PPP discipline */
- sprintf (pttyname, "/dev/ptyXX");
- p1 = &pttyname[8];
- p2 = &pttyname[9];
- for (i=0; i<16; i++) {
- struct stat stb;
-
- *p1 = "pqrstuvwxyzabcde"[i];
- *p2 = '0';
- if (stat (pttyname, &stb) < 0)
- continue;
- for (j=0; j<16; j++) {
- *p2 = "0123456789abcdef"[j];
- p = open (pttyname, 2);
- if (p > 0) {
- if (ioctl (p, TIOCSETD, &ppp_disc) < 0) {
- fprintf (stderr, "No PPP discipline in kernel.\n");
- close (p);
- return 0;
- }
- close (p);
- return 1;
- }
- }
- }
- fprintf (stderr, "Cannot get pseudo-tty.\n");
- return 0;
-#else
- return 1;
-#endif
-}
-
-static char *
-format_timeslots (unsigned long s)
-{
- static char buf [100];
- char *p = buf;
- int i;
-
- for (i=1; i<32; ++i)
- if ((s >> i) & 1) {
- int prev = (i > 1) & (s >> (i-1));
- int next = (i < 31) & (s >> (i+1));
-
- if (prev) {
- if (next)
- continue;
- *p++ = '-';
- } else if (p > buf)
- *p++ = ',';
-
- if (i >= 10)
- *p++ = '0' + i / 10;
- *p++ = '0' + i % 10;
- }
- *p = 0;
- return buf;
-}
-
-static void
-print_modems (int fd, int need_header)
-{
- int status;
-
- if (ioctl (fd, TIOCMGET, &status) < 0) {
- perror ("getting modem status");
- return;
- }
- if (need_header)
- printf ("Channel\tLE\tDTR\tDSR\tRTS\tCTS\tCD\n");
- printf ("%s\t%s\t%s\t%s\t%s\t%s\t%s\n", chan_name,
- status & TIOCM_LE ? "On" : "-",
- status & TIOCM_DTR ? "On" : "-",
- status & TIOCM_DSR ? "On" : "-",
- status & TIOCM_RTS ? "On" : "-",
*** 973 LINES SKIPPED ***