git: 6e5056a903cc - main - bwi: Remove write-only variable

The branch main has been updated by imp:

URL: https://cgit.FreeBSD.org/src/commit/?id=6e5056a903ccad5c5e9da543f77f9e0fe55489fb

commit 6e5056a903ccad5c5e9da543f77f9e0fe55489fb
Author:     Warner Losh <imp@FreeBSD.org>
AuthorDate: 2022-04-05 19:07:20 +0000
Commit:     Warner Losh <imp@FreeBSD.org>
CommitDate: 2022-04-05 19:52:54 +0000

    bwi: Remove write-only variable
    
    bbp_atten is write-only: we don't use it later in
    bwi_rf_calc_nrssi_slope_11b. However, we may also be able to eliminate
    the read of this value from the device. However, The documationation for
    this hardware is thing and I can't test this card so I've left the read
    of this register in case it's required.
    
    Sponsored by:           Netflix
---
 sys/dev/bwi/bwirf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sys/dev/bwi/bwirf.c b/sys/dev/bwi/bwirf.c
index 1345c64d126a..e3a3d1b88e5f 100644
--- a/sys/dev/bwi/bwirf.c
+++ b/sys/dev/bwi/bwirf.c
@@ -1649,7 +1649,7 @@ bwi_rf_calc_nrssi_slope_11b(struct bwi_mac *mac)
 	struct bwi_phy *phy = &mac->mac_phy;
 	uint16_t save_rf[SAVE_RF_MAX];
 	uint16_t save_phy[SAVE_PHY_MAX];
-	uint16_t ant_div, bbp_atten, chan_ex;
+	uint16_t ant_div, chan_ex;
 	int16_t nrssi[2];
 	int i;
 
@@ -1662,7 +1662,7 @@ bwi_rf_calc_nrssi_slope_11b(struct bwi_mac *mac)
 		save_phy[i] = PHY_READ(mac, save_phy_regs[i]);
 
 	ant_div = CSR_READ_2(sc, BWI_RF_ANTDIV);
-	bbp_atten = CSR_READ_2(sc, BWI_BBP_ATTEN);
+	CSR_READ_2(sc, BWI_BBP_ATTEN);
 	chan_ex = CSR_READ_2(sc, BWI_RF_CHAN_EX);
 
 	/*