git: 9264bd386cfc - main - ipq4018: add a device tree file for the ASUS rt-ac58u router

The branch main has been updated by adrian:

URL: https://cgit.FreeBSD.org/src/commit/?id=9264bd386cfcb3c081f9b7e2a695f25c367c0891

commit 9264bd386cfcb3c081f9b7e2a695f25c367c0891
Author:     Adrian Chadd <adrian@FreeBSD.org>
AuthorDate: 2021-10-16 03:13:04 +0000
Commit:     Adrian Chadd <adrian@FreeBSD.org>
CommitDate: 2021-10-18 19:18:46 +0000

    ipq4018: add a device tree file for the ASUS rt-ac58u router
    
    This is the initial device tree file describing the ASUS
    RT-AC58U 2GHz/5GHz 11ac router.
    
    Obtained from: OpenWRT
---
 sys/dts/arm/qcom-ipq4018-rt-ac58u.dts | 312 ++++++++++++++++++++++++++++++++++
 1 file changed, 312 insertions(+)

diff --git a/sys/dts/arm/qcom-ipq4018-rt-ac58u.dts b/sys/dts/arm/qcom-ipq4018-rt-ac58u.dts
new file mode 100644
index 000000000000..8a280c79e942
--- /dev/null
+++ b/sys/dts/arm/qcom-ipq4018-rt-ac58u.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "ASUS RT-AC58U";
+	compatible = "asus,rt-ac58u";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		bootargs-append = " ubi.mtd=UBI_DEV";
+//		stdout-path = "serial0:115200n8";
+		stdout-path = "serial0";
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		usb3@8af8800 {
+			status = "okay";
+
+			dwc3@8a00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb3_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				usb3_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+		};
+
+		edma@c080000 {
+			status = "okay";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: status {
+			label = "blue:status";
+			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "blue:wan";
+			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan2G {
+			label = "blue:wlan2G";
+			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wlan5G {
+			label = "blue:wlan5G";
+			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		usb {
+			label = "blue:usb";
+			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&usb3_port1>, <&usb3_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		lan {
+			label = "blue:lan";
+			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		mux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+
+		mux_cs {
+			function = "gpio";
+			pins = "gpio54", "gpio59";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		/*
+		 * U-boot looks for "n25q128a11" node,
+		 * if we don't have it, it will spit out the following warning:
+		 * "ipq: fdt fixup unable to find compatible node".
+		 */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
+		spi-max-frequency = <30000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SBL1";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "MIBIB";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "QSEE";
+				reg = <0x00060000 0x00060000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "CDT";
+				reg = <0x000c0000 0x00010000>;
+				read-only;
+			};
+			partition@d0000 {
+				label = "DDRPARAMS";
+				reg = <0x000d0000 0x00010000>;
+				read-only;
+			};
+			partition@e0000 {
+				label = "APPSBLENV"; /* uboot env*/
+				reg = <0x000e0000 0x00010000>;
+				read-only;
+			};
+			partition@f0000 {
+				label = "APPSBL"; /* uboot */
+				reg = <0x000f0000 0x00080000>;
+				read-only;
+			};
+			partition@170000 {
+				label = "ART";
+				reg = <0x00170000 0x00010000>;
+				read-only;
+			};
+			/* 0x00180000 - 0x00200000 unused */
+		};
+	};
+
+	spi-nand@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <30000000>;
+
+		/*
+		 * U-boot looks for "spinand,mt29f" node,
+		 * if we don't have it, it will spit out the following warning:
+		 * "ipq: fdt fixup unable to find compatible node".
+		 */
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				/*
+				 * TODO: change to label = "ubi" once we drop 4.14.
+				 *       also drop the bootargs-append and all the
+				 *	 userspace CI_UBIPART="UBI_DEV" remains.
+				 */
+				label = "UBI_DEV";
+				reg = <0x00000000 0x08000000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "RT-AC58U";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "RT-AC58U";
+};