git: ab350f6e4a6f - main - aw_thermal: Add an init function to the SoC configuration
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Wed, 18 Nov 2026 06:49:14 UTC
The branch main has been updated by manu:
URL: https://cgit.FreeBSD.org/src/commit/?id=ab350f6e4a6f8467b08962e953ca45073fb0e10c
commit ab350f6e4a6f8467b08962e953ca45073fb0e10c
Author: Emmanuel Vadot <manu@FreeBSD.org>
AuthorDate: 2026-11-17 21:50:13 +0000
Commit: Emmanuel Vadot <manu@FreeBSD.org>
CommitDate: 2026-11-18 06:49:00 +0000
aw_thermal: Add an init function to the SoC configuration
Move the initialisation of the controller to a function of the SoC
configuration, as the controller of the H6 is different from the one
of the other supported SoCs.
No functional change intended.
---
sys/arm/allwinner/aw_thermal.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sys/arm/allwinner/aw_thermal.c b/sys/arm/allwinner/aw_thermal.c
index bdb7e2dacc4e..bc8cde323fe8 100644
--- a/sys/arm/allwinner/aw_thermal.c
+++ b/sys/arm/allwinner/aw_thermal.c
@@ -152,6 +152,8 @@ struct aw_thermal_sensor {
int init_shut;
};
+struct aw_thermal_softc;
+
struct aw_thermal_config {
struct aw_thermal_sensor sensors[MAX_SENSORS];
int nsensors;
@@ -160,6 +162,7 @@ struct aw_thermal_config {
int adc_cali_en;
uint32_t filter;
uint32_t thermal_per;
+ int (*init)(struct aw_thermal_softc *);
int (*to_temp)(uint32_t, int);
uint32_t (*to_reg)(int, int);
int temp_base;
@@ -169,6 +172,8 @@ struct aw_thermal_config {
uint32_t calib0_mask, calib1_mask;
};
+static int aw_thermal_v1_init(struct aw_thermal_softc *);
+
static int
a83t_to_temp(uint32_t val, int sensor)
{
@@ -196,6 +201,7 @@ static const struct aw_thermal_config a83t_config = {
.adc_cali_en = 1,
.filter = A83T_FILTER,
.thermal_per = A83T_THERMAL_PER,
+ .init = aw_thermal_v1_init,
.to_temp = a83t_to_temp,
.calib0_mask = 0xffffffff,
.calib1_mask = 0xffff,
@@ -228,6 +234,7 @@ static const struct aw_thermal_config a64_config = {
.adc_cali_en = 1,
.filter = A64_FILTER,
.thermal_per = A64_THERMAL_PER,
+ .init = aw_thermal_v1_init,
.to_temp = a64_to_temp,
.calib0_mask = 0xffffffff,
.calib1_mask = 0xffff,
@@ -260,6 +267,7 @@ static const struct aw_thermal_config h3_config = {
.adc_cali_en = 1,
.filter = H3_FILTER,
.thermal_per = H3_THERMAL_PER,
+ .init = aw_thermal_v1_init,
.to_temp = h3_to_temp,
.to_reg = h3_to_reg,
.calib0_mask = 0xffffffff,
@@ -334,6 +342,7 @@ static const struct aw_thermal_config h5_config = {
.adc_acquire_time = H5_ADC_ACQUIRE_TIME,
.filter = H5_FILTER,
.thermal_per = H5_THERMAL_PER,
+ .init = aw_thermal_v1_init,
.to_temp = h5_to_temp,
.to_reg = h5_to_reg,
.calib0_mask = 0xffffffff,
@@ -375,7 +384,7 @@ static struct resource_spec aw_thermal_spec[] = {
#define WR4(sc, reg, val) bus_write_4((sc)->res[0], (reg), (val))
static int
-aw_thermal_init(struct aw_thermal_softc *sc)
+aw_thermal_v1_init(struct aw_thermal_softc *sc)
{
phandle_t node;
uint32_t calib[2];
@@ -664,7 +673,7 @@ aw_thermal_attach(device_t dev)
sc->conf->sensors[i].init_shut);
}
- if (aw_thermal_init(sc) != 0)
+ if (sc->conf->init(sc) != 0)
goto fail;
for (i = 0; i < sc->conf->nsensors; i++)