git: 6dd16be872c6 - main - OpenSSH: Update to 10.6p1
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Tue, 10 Nov 2026 14:08:47 UTC
The branch main has been updated by emaste:
URL: https://cgit.FreeBSD.org/src/commit/?id=6dd16be872c631a4c011983107acd213a6fe619d
commit 6dd16be872c631a4c011983107acd213a6fe619d
Merge: 79fbc233102e ef78a8879d4a
Author: Ed Maste <emaste@FreeBSD.org>
AuthorDate: 2026-11-10 14:08:18 +0000
Commit: Ed Maste <emaste@FreeBSD.org>
CommitDate: 2026-11-10 14:08:18 +0000
OpenSSH: Update to 10.6p1
This release contains security fixes and small bugfixes.
Full release notes are available at
https://www.openssh.com/txt/release-10.6 .
Selected items from the upstream release notes:
Security
========
* ssh-agent(1): fix an interaction between agent locking and the
session-bind@openssh.com extension that is used to identify
forwarded agents. These binding requests were refused when the
agent was locked, with the result that operations that were
intended to be limited to local use only could be performed
remotely, including the ability to add PKCS#11 tokens and make
use of keys that had destination restrictions applied.
Reported by sn0x-sharma
* ssh(1): avoid potential realloc use-after-free in the client if a
remote forwarding is added via the local session multiplexing
socket while a remote forwarding open request is pending with the
server. Report and fix from Brian Mingus of Cognatory
* sshd(8): make the authorized_keys "restrict" keyword apply
correctly to tunnel forwarding too (which is administratively
disabled by default). Reported by Erichen, Institute of Computing
Technology, Chinese Academy of Sciences
New features
------------
* ssh-keygen(1): add ability to set or clear the touch-required and
verify-required flags on FIDO private keys when resetting a
private key's passphrase.
* ssh(1): tweak ordering of certificates tried during pubkey
authentication to prefer FIDO keys that do not require user
presence (touch) first, and FIDO keys that require user
verification via PIN or biometrics last. This effectively tries
low-friction authenticators before higher friction ones.
* ssh(1): add a "ssh -Z user@host" mode that prints the keys that
will be tried for public key authentication in the order that
they will be used.
* sshd(8) use setproctitle(3) to identify sshd-session when its
acting as a post-authentication monitor.
Sponsored by: The FreeBSD Foundation
crypto/openssh/.depend | 2 +-
crypto/openssh/.github/ci-status.md | 5 +
crypto/openssh/.github/configs | 3 +
crypto/openssh/.github/pin_actions.sh | 3 +
crypto/openssh/.github/setup_ci.sh | 6 +-
crypto/openssh/.github/workflows/c-cpp.yml | 9 +-
crypto/openssh/.github/workflows/selfhosted.yml | 6 +-
crypto/openssh/.github/workflows/upstream.yml | 2 +-
crypto/openssh/.github/workflows/vm.yml | 8 +-
crypto/openssh/ChangeLog | 15775 ++++++++++---------
crypto/openssh/INSTALL | 2 +-
crypto/openssh/Makefile.in | 2 +-
crypto/openssh/README.platform | 6 +-
crypto/openssh/atomicio.c | 4 -
crypto/openssh/auth-options.c | 3 +-
crypto/openssh/auth.h | 4 +-
crypto/openssh/auth2-hostbased.c | 49 +-
crypto/openssh/auth2-pubkey.c | 127 +-
crypto/openssh/auth2.c | 5 +-
crypto/openssh/channels.c | 185 +-
crypto/openssh/channels.h | 28 +-
crypto/openssh/clientloop.c | 6 +-
crypto/openssh/clientloop.h | 2 +-
crypto/openssh/config.h | 14 +-
crypto/openssh/configure.ac | 62 +-
crypto/openssh/contrib/README | 2 +-
crypto/openssh/contrib/redhat/openssh.spec | 4 +-
crypto/openssh/contrib/suse/openssh.spec | 2 +-
crypto/openssh/crypto_api.h | 8 +-
crypto/openssh/defines.h | 16 +
crypto/openssh/ed25519-openssl.c | 53 +-
crypto/openssh/ed25519.c | 6291 +++++---
crypto/openssh/ed25519.sh | 431 +-
crypto/openssh/gss-serv.c | 34 +-
crypto/openssh/kex.c | 39 +-
crypto/openssh/kex.h | 7 +-
crypto/openssh/kexgen.c | 5 +-
crypto/openssh/kexgexc.c | 5 +-
crypto/openssh/misc-agent.c | 240 +-
crypto/openssh/misc.c | 129 +-
crypto/openssh/misc.h | 16 +-
crypto/openssh/monitor.c | 4 +-
crypto/openssh/monitor_wrap.c | 8 +-
crypto/openssh/mux.c | 4 +-
crypto/openssh/myproposal.h | 6 +-
crypto/openssh/openbsd-compat/Makefile.in | 1 +
crypto/openssh/openbsd-compat/bsd-openpty.c | 10 +-
crypto/openssh/openbsd-compat/openbsd-compat.h | 8 +-
crypto/openssh/openbsd-compat/port-linux-selinux.c | 243 +
crypto/openssh/openbsd-compat/port-linux.c | 211 +-
crypto/openssh/openbsd-compat/readpassphrase.c | 60 +-
crypto/openssh/packet.c | 42 +-
crypto/openssh/packet.h | 3 +-
crypto/openssh/pathnames.h | 9 +-
crypto/openssh/readconf.c | 29 +-
crypto/openssh/readconf.h | 6 +-
crypto/openssh/regress/cert-userkey.sh | 5 +-
crypto/openssh/regress/keygen-comment.sh | 4 +-
crypto/openssh/regress/keytype.sh | 4 +-
crypto/openssh/regress/misc/sk-dummy/sk-dummy.c | 18 +-
crypto/openssh/regress/multiplex.sh | 2 +-
crypto/openssh/regress/percent.sh | 24 +-
crypto/openssh/regress/unittests/authopt/tests.c | 40 +-
.../regress/unittests/crypto/test_ed25519.c | 24 +-
.../openssh/regress/unittests/sshkey/mktestdata.sh | 6 +-
.../unittests/sshkey/testdata/mldsa44_ed25519_1 | 112 +-
.../sshkey/testdata/mldsa44_ed25519_1-cert.fp | 2 +-
.../sshkey/testdata/mldsa44_ed25519_1-cert.pub | 2 +-
.../unittests/sshkey/testdata/mldsa44_ed25519_1.fp | 2 +-
.../sshkey/testdata/mldsa44_ed25519_1.fp.bb | 2 +-
.../sshkey/testdata/mldsa44_ed25519_1.pub | 2 +-
.../unittests/sshkey/testdata/mldsa44_ed25519_1_pw | 113 +-
.../unittests/sshkey/testdata/mldsa44_ed25519_2 | 112 +-
.../unittests/sshkey/testdata/mldsa44_ed25519_2.fp | 2 +-
.../sshkey/testdata/mldsa44_ed25519_2.fp.bb | 2 +-
.../sshkey/testdata/mldsa44_ed25519_2.pub | 2 +-
.../unittests/sshsig/testdata/mldsa44-ed25519 | 112 +-
.../unittests/sshsig/testdata/mldsa44-ed25519.pub | 2 +-
.../unittests/sshsig/testdata/mldsa44-ed25519.sig | 151 +-
crypto/openssh/sandbox-seccomp-filter.c | 5 +-
crypto/openssh/scp.1 | 6 +-
crypto/openssh/scp.c | 10 +-
crypto/openssh/servconf.c | 162 +-
crypto/openssh/servconf.h | 19 +-
crypto/openssh/session.c | 11 +-
crypto/openssh/sftp-client.c | 38 +-
crypto/openssh/sftp-client.h | 5 +-
crypto/openssh/sftp-server.8 | 6 +-
crypto/openssh/sftp-usergroup.c | 2 +
crypto/openssh/sftp.1 | 22 +-
crypto/openssh/sftp.c | 64 +-
crypto/openssh/sk-usbhid.c | 15 +-
crypto/openssh/ssh-add.1 | 11 +-
crypto/openssh/ssh-add.c | 32 +-
crypto/openssh/ssh-agent.1 | 39 +-
crypto/openssh/ssh-agent.c | 80 +-
crypto/openssh/ssh-ed25519-sk.c | 27 +-
crypto/openssh/ssh-ed25519.c | 49 +-
crypto/openssh/ssh-gss.h | 4 +-
crypto/openssh/ssh-keygen.1 | 6 +-
crypto/openssh/ssh-keygen.c | 61 +-
crypto/openssh/ssh-keyscan.c | 6 +-
crypto/openssh/ssh-mldsa-eddsa.c | 46 +-
crypto/openssh/ssh-sk-helper.c | 2 +-
crypto/openssh/ssh.1 | 148 +-
crypto/openssh/ssh.c | 12 +-
crypto/openssh/ssh_config.5 | 53 +-
crypto/openssh/ssh_namespace.h | 21 +-
crypto/openssh/sshconnect.c | 16 +-
crypto/openssh/sshconnect2.c | 20 +-
crypto/openssh/sshd-auth.c | 5 +-
crypto/openssh/sshd-session.c | 31 +-
crypto/openssh/sshd.8 | 8 +-
crypto/openssh/sshd.c | 45 +-
crypto/openssh/sshd_config.5 | 125 +-
crypto/openssh/ssherr.c | 4 +-
crypto/openssh/ssherr.h | 3 +-
crypto/openssh/sshkey.c | 84 +-
crypto/openssh/sshkey.h | 4 +-
crypto/openssh/sshpty.c | 20 +-
crypto/openssh/sshpty.h | 3 +-
crypto/openssh/utf8.c | 15 +-
crypto/openssh/version.h | 4 +-
secure/usr.sbin/sshd/Makefile | 2 +-
124 files changed, 15125 insertions(+), 11215 deletions(-)
diff --cc crypto/openssh/INSTALL
index ec7c29be57d7,000000000000..b0b3217a9589
mode 100644,000000..100644
--- a/crypto/openssh/INSTALL
+++ b/crypto/openssh/INSTALL
@@@ -1,298 -1,0 +1,298 @@@
+1. Prerequisites
+----------------
+
+A C compiler. Any C89 or better compiler that supports variadic macros
+should work. Where supported, configure will attempt to enable the
+compiler's run-time integrity checking options. Some notes about
+specific compilers:
+ - clang: -ftrapv and -sanitize=integer require the compiler-rt runtime
+ (CC=clang LDFLAGS=--rtlib=compiler-rt ./configure)
+
+To support Privilege Separation (which is now required) you will need
+to create the user, group and directory used by sshd for privilege
+separation. See README.privsep for details.
+
+
+The remaining items are optional.
+
+A working installation of zlib:
+Zlib 1.1.4 or 1.2.1.2 or greater (earlier 1.2.x versions have problems):
+https://zlib.net/
+
+libcrypto from one of LibreSSL, OpenSSL, AWS-LC or BoringSSL. Building
+without libcrypto is supported but severely restricts the available
+ciphers and algorithms.
+ - LibreSSL (https://www.libressl.org/) 3.1.0 or greater
+ - OpenSSL (https://www.openssl.org) 1.1.1 or greater
+ - AWS-LC (https://github.com/aws/aws-lc)
+ - BoringSSL (https://github.com/google/boringssl)
+
+libcrypto should be compiled as a position-independent library
+(i.e. -fPIC, eg by configuring OpenSSL as "./config [options] -fPIC"
+or LibreSSL as "CFLAGS=-fPIC ./configure") otherwise OpenSSH will not
+be able to link with it. If you must use a non-position-independent
+libcrypto, then you may need to configure OpenSSH --without-pie.
+
+If you build either from source, running the OpenSSL self-test ("make
+tests") or the LibreSSL equivalent ("make check") and ensuring that all
+tests pass is strongly recommended.
+
+NB. If you operating system supports /dev/random, you should configure
+libcrypto (LibreSSL/OpenSSL) to use it. OpenSSH relies on libcrypto's
+direct support of /dev/random, or failing that, either prngd or egd.
+
+PRNGD:
+
+If your system lacks kernel-based random collection, the use of Lutz
+Jaenicke's PRNGd is recommended. If you are using libcrypto it requires
+that the libcrypto is configured to support it. If you are building
+--without-openssl then the --with-prngd-socket option must match the
+socket provided by prngd.
+
+http://prngd.sourceforge.net/
+
+EGD:
+
+The Entropy Gathering Daemon (EGD) supports the same interface as prngd.
+The same caveats about configuration for prngd also apply.
+
+http://egd.sourceforge.net/
+
+PAM:
+
+OpenSSH can utilise Pluggable Authentication Modules (PAM) if your
+system supports it. PAM is standard most Linux distributions, Solaris,
+HP-UX 11, AIX >= 5.2, FreeBSD, NetBSD and Mac OS X.
+
+Information about the various PAM implementations are available:
+
+Solaris PAM: http://www.sun.com/software/solaris/pam/
+Linux PAM: http://www.kernel.org/pub/linux/libs/pam/
+OpenPAM: http://www.openpam.org/
+
+If you wish to build the GNOME passphrase requester, you will need the GNOME
+libraries and headers.
+
+GNOME:
+http://www.gnome.org/
+
+Alternatively, Jim Knoble <jmknoble@pobox.com> has written an excellent X11
+passphrase requester. This is maintained separately at:
+
- http://www.jmknoble.net/software/x11-ssh-askpass/
++https://web.archive.org/web/20131006102910/http://jmknoble.net/software/x11-ssh-askpass/
+
+TCP Wrappers:
+
+If you wish to use the TCP wrappers functionality you will need at least
+tcpd.h and libwrap.a, either in the standard include and library paths,
+or in the directory specified by --with-tcp-wrappers. Version 7.6 is
+known to work.
+
+http://ftp.porcupine.org/pub/security/index.html
+
+LibEdit:
+
+sftp supports command-line editing via NetBSD's libedit. If your platform
+has it available natively you can use that, alternatively you might try
+these multi-platform ports:
+
+http://www.thrysoee.dk/editline/
+http://sourceforge.net/projects/libedit/
+
+LDNS:
+
+LDNS is a DNS BSD-licensed resolver library which supports DNSSEC.
+
+http://nlnetlabs.nl/projects/ldns/
+
+Autoconf:
+
+If you modify configure.ac or configure doesn't exist (eg if you checked
+the main git branch) then you will need autoconf-2.69 and automake-1.16.1
+or newer to rebuild the automatically generated files by running
+"autoreconf". Earlier versions may also work but this is not guaranteed.
+
+http://www.gnu.org/software/autoconf/
+http://www.gnu.org/software/automake/
+
+Basic Security Module (BSM):
+
+Native BSM support is known to exist in Solaris from at least 2.5.1,
+FreeBSD 6.1 and OS X. Alternatively, you may use the OpenBSM
+implementation (http://www.openbsm.org).
+
+makedepend:
+
+https://www.x.org/archive/individual/util/
+
+If you are making significant changes to the code you may need to rebuild
+the dependency (.depend) file using "make depend", which requires the
+"makedepend" tool from the X11 distribution.
+
+libfido2:
+
+libfido2 allows the use of hardware security keys over USB. libfido2
+in turn depends on libcbor. libfido2 >= 1.5.0 is strongly recommended.
+Limited functionality is possible with earlier libfido2 versions.
+
+https://github.com/Yubico/libfido2
+https://github.com/pjk/libcbor
+
+
+2. Building / Installation
+--------------------------
+
+To install OpenSSH with default options:
+
+./configure
+make
+make install
+
+This will install the OpenSSH binaries in /usr/local/bin, configuration files
+in /usr/local/etc, the server in /usr/local/sbin, etc. To specify a different
+installation prefix, use the --prefix option to configure:
+
+./configure --prefix=/opt
+make
+make install
+
+Will install OpenSSH in /opt/{bin,etc,lib,sbin}. You can also override
+specific paths, for example:
+
+./configure --prefix=/opt --sysconfdir=/etc/ssh
+make
+make install
+
+This will install the binaries in /opt/{bin,lib,sbin}, but will place the
+configuration files in /etc/ssh.
+
+If you are using PAM, you may need to manually install a PAM control
+file as "/etc/pam.d/sshd" (or wherever your system prefers to keep
+them). Note that the service name used to start PAM is __progname,
+which is the basename of the path of your sshd (e.g., the service name
+for /usr/sbin/osshd will be osshd). If you have renamed your sshd
+executable, your PAM configuration may need to be modified.
+
+A generic PAM configuration is included as "contrib/sshd.pam.generic",
+you may need to edit it before using it on your system. If you are
+using a recent version of Red Hat Linux, the config file in
+contrib/redhat/sshd.pam should be more useful. Failure to install a
+valid PAM file may result in an inability to use password
+authentication. On HP-UX 11 and Solaris, the standard /etc/pam.conf
+configuration will work with sshd (sshd will match the other service
+name).
+
+There are a few other options to the configure script:
+
+--with-audit=[module] enable additional auditing via the specified module.
+Currently, drivers for "debug" (additional info via syslog) and "bsm"
+(Sun's Basic Security Module) are supported.
+
+--with-pam enables PAM support. If PAM support is compiled in, it must
+also be enabled in sshd_config (refer to the UsePAM directive).
+
+--with-prngd-socket=/some/file allows you to enable EGD or PRNGD
+support and to specify a PRNGd socket. Use this if your Unix lacks
+/dev/random.
+
+--with-prngd-port=portnum allows you to enable EGD or PRNGD support
+and to specify a EGD localhost TCP port. Use this if your Unix lacks
+/dev/random.
+
+--with-lastlog=FILE will specify the location of the lastlog file.
+./configure searches a few locations for lastlog, but may not find
+it if lastlog is installed in a different place.
+
+--without-lastlog will disable lastlog support entirely.
+
+--with-osfsia, --without-osfsia will enable or disable OSF1's Security
+Integration Architecture. The default for OSF1 machines is enable.
+
+--with-tcp-wrappers will enable TCP Wrappers (/etc/hosts.allow|deny)
+support.
+
+--with-utmpx enables utmpx support. utmpx support is automatic for
+some platforms.
+
+--without-shadow disables shadow password support.
+
+--with-ipaddr-display forces the use of a numeric IP address in the
+$DISPLAY environment variable. Some broken systems need this.
+
+--with-default-path=PATH allows you to specify a default $PATH for sessions
+started by sshd. This replaces the standard path entirely.
+
+--with-pid-dir=PATH specifies the directory in which the sshd.pid file is
+created.
+
+--with-xauth=PATH specifies the location of the xauth binary
+
+--with-ssl-dir=DIR allows you to specify where your Libre/OpenSSL
+libraries are installed.
+
+--with-ssl-engine enables Libre/OpenSSL's (hardware) ENGINE support
+
+--without-openssl builds without using OpenSSL. Only a subset of ciphers
+and algorithms are supported in this configuration.
+
+--without-zlib builds without zlib. This disables the Compression option.
+
+--with-4in6 Check for IPv4 in IPv6 mapped addresses and convert them to
+real (AF_INET) IPv4 addresses. Works around some quirks on Linux.
+
+If you need to pass special options to the compiler or linker, you
+can specify these as environment variables before running ./configure.
+For example:
+
+CC="/usr/foo/cc" CFLAGS="-O" LDFLAGS="-s" LIBS="-lrubbish" ./configure
+
+3. Configuration
+----------------
+
+The runtime configuration files are installed by in ${prefix}/etc or
+whatever you specified as your --sysconfdir (/usr/local/etc by default).
+
+The default configuration should be instantly usable, though you should
+review it to ensure that it matches your security requirements.
+
+To generate a host key, run "make host-key". Alternately you can do so
+manually using the following commands:
+
+ ssh-keygen -t [type] -f /etc/ssh/ssh_host_key -N ""
+
+for each of the types you wish to generate (rsa, ed25519 or ecdsa) or
+
+ ssh-keygen -A
+
+to generate keys for all supported types.
+
+Replacing /etc/ssh with the correct path to the configuration directory.
+(${prefix}/etc or whatever you specified with --sysconfdir during
+configuration).
+
+If you have configured OpenSSH with EGD/prngd support, ensure that EGD or
+prngd is running and has collected some entropy first.
+
+For more information on configuration, please refer to the manual pages
+for sshd, ssh and ssh-agent.
+
+4. (Optional) Send survey
+-------------------------
+
+$ make survey
+[check the contents of the file "survey" to ensure there's no information
+that you consider sensitive]
+$ make send-survey
+
+This will send configuration information for the currently configured
+host to a survey address. This will help determine which configurations
+are actually in use, and what valid combinations of configure options
+exist. The raw data is available only to the OpenSSH developers, however
+summary data may be published.
+
+5. Problems?
+------------
+
+If you experience problems compiling, installing or running OpenSSH,
+please refer to the "reporting bugs" section of the webpage at
+https://www.openssh.com/
diff --cc crypto/openssh/config.h
index 5a634f67894c,000000000000..9436c79a669a
mode 100644,000000..100644
--- a/crypto/openssh/config.h
+++ b/crypto/openssh/config.h
@@@ -1,2119 -1,0 +1,2125 @@@
+/* config.h. Generated from config.h.in by configure. */
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define if building universal (internal helper macro) */
+/* #undef AC_APPLE_UNIVERSAL_BUILD */
+
+/* Define if you have a getaddrinfo that fails for the all-zeros IPv6 address
+ */
+/* #undef AIX_GETNAMEINFO_HACK */
+
+/* Define if your AIX loginfailed() function takes 4 arguments (AIX >= 5.2) */
+/* #undef AIX_LOGINFAILED_4ARG */
+
+/* System only supports IPv4 audit records */
+/* #undef AU_IPv4 */
+
+/* Define if your resolver libs need this for getrrsetbyname */
+/* #undef BIND_8_COMPAT */
+
+/* The system has incomplete BSM API */
+/* #undef BROKEN_BSM_API */
+
+/* broken in chroots on older kernels */
+/* #undef BROKEN_CLOSEFROM */
+
+/* Define if cmsg_type is not passed correctly */
+/* #undef BROKEN_CMSG_TYPE */
+
+/* getaddrinfo is broken (if present) */
+/* #undef BROKEN_GETADDRINFO */
+
+/* getgroups(0,NULL) will return -1 */
+/* #undef BROKEN_GETGROUPS */
+
+/* getline is not what we expect */
+/* #undef BROKEN_GETLINE */
+
+/* Do not use system glob */
+#define BROKEN_GLOB 1
+
+/* Define if you system's inet_ntoa is busted (e.g. Irix gcc issue) */
+/* #undef BROKEN_INET_NTOA */
+
+/* Define if your struct dirent expects you to allocate extra space for d_name
+ */
+/* #undef BROKEN_ONE_BYTE_DIRENT_D_NAME */
+
+/* System poll(2) implementation is broken */
+/* #undef BROKEN_POLL */
+
+/* Can't do comparisons on readv */
+/* #undef BROKEN_READV_COMPARISON */
+
- /* NetBSD read function is sometimes redirected, breaking atomicio comparisons
- against it */
- /* #undef BROKEN_READ_COMPARISON */
-
+/* Needed for NeXT */
+/* #undef BROKEN_SAVED_UIDS */
+
+/* Define if your setregid() is broken */
+/* #undef BROKEN_SETREGID */
+
+/* Define if your setresgid() is broken */
+/* #undef BROKEN_SETRESGID */
+
+/* Define if your setresuid() is broken */
+/* #undef BROKEN_SETRESUID */
+
+/* Define if your setreuid() is broken */
+/* #undef BROKEN_SETREUID */
+
+/* LynxOS has broken setvbuf() implementation */
+/* #undef BROKEN_SETVBUF */
+
+/* QNX shadow support is broken */
+/* #undef BROKEN_SHADOW_EXPIRE */
+
+/* Define if your snprintf is busted */
+/* #undef BROKEN_SNPRINTF */
+
+/* strndup broken, see APAR IY61211 */
+/* #undef BROKEN_STRNDUP */
+
+/* strnlen broken, see APAR IY62551 */
+/* #undef BROKEN_STRNLEN */
+
+/* strnvis detected broken */
+#define BROKEN_STRNVIS 1
+
+/* tcgetattr with ICANON may hang */
+/* #undef BROKEN_TCGETATTR_ICANON */
+
+/* updwtmpx is broken (if present) */
+/* #undef BROKEN_UPDWTMPX */
+
+/* Define if you have BSD auth support */
+/* #undef BSD_AUTH */
+
+/* Define if you want to specify the path to your lastlog file */
+/* #undef CONF_LASTLOG_FILE */
+
+/* Define if you want to specify the path to your utmp file */
+/* #undef CONF_UTMP_FILE */
+
+/* Define if you want to specify the path to your wtmpx file */
+/* #undef CONF_WTMPX_FILE */
+
+/* Define if you want to specify the path to your wtmp file */
+/* #undef CONF_WTMP_FILE */
+
+/* Need to call setpgrp as root */
+/* #undef DISABLE_FD_PASSING */
+
+/* Define if you don't want to use lastlog */
+/* #undef DISABLE_LASTLOG */
+
+/* Define if you don't want to use your system's login() call */
+/* #undef DISABLE_LOGIN */
+
+/* Define if you don't want to use pututline() etc. to write [uw]tmp */
+/* #undef DISABLE_PUTUTLINE */
+
+/* Define if you don't want to use pututxline() etc. to write [uw]tmpx */
+/* #undef DISABLE_PUTUTXLINE */
+
+/* Define if you want to disable shadow passwords */
+/* #undef DISABLE_SHADOW */
+
+/* Define if you don't want to use utmp */
+#define DISABLE_UTMP 1
+
+/* Define if you don't want to use utmpx */
+/* #undef DISABLE_UTMPX */
+
+/* Define if you don't want to use wtmp */
+#define DISABLE_WTMP 1
+
+/* Define if you don't want to use wtmpx */
+#define DISABLE_WTMPX 1
+
+/* Enable for PKCS#11 support */
+#define ENABLE_PKCS11 /**/
+
+/* Enable for U2F/FIDO support */
+#define ENABLE_SK /**/
+
+/* Enable for built-in U2F/FIDO support */
+/* #undef ENABLE_SK_INTERNAL */
+
+/* define if fflush(NULL) does not work */
+/* #undef FFLUSH_NULL_BUG */
+
+/* File names may not contain backslash characters */
+/* #undef FILESYSTEM_NO_BACKSLASH */
+
+/* fsid_t has member val */
+/* #undef FSID_HAS_VAL */
+
+/* fsid_t has member __val */
+/* #undef FSID_HAS___VAL */
+
+/* getpgrp takes one arg */
+#define GETPGRP_VOID 1
+
+/* Conflicting defs for getspnam */
+/* #undef GETSPNAM_CONFLICTING_DEFS */
+
+/* Define if your system glob() function has the GLOB_ALTDIRFUNC extension */
+#define GLOB_HAS_ALTDIRFUNC 1
+
+/* Define if your system glob() function has gl_matchc options in glob_t */
+#define GLOB_HAS_GL_MATCHC 1
+
+/* Define if your system glob() function has gl_statv options in glob_t */
+/* #undef GLOB_HAS_GL_STATV */
+
+/* Define this if you want GSSAPI support in the version 2 protocol */
+/* #undef GSSAPI */
+
+/* Define if you want to use shadow password expire field */
+/* #undef HAS_SHADOW_EXPIRE */
+
+/* Define if your system uses access rights style file descriptor passing */
+/* #undef HAVE_ACCRIGHTS_IN_MSGHDR */
+
+/* Define if you have ut_addr in utmp.h */
+/* #undef HAVE_ADDR_IN_UTMP */
+
+/* Define if you have ut_addr in utmpx.h */
+/* #undef HAVE_ADDR_IN_UTMPX */
+
+/* Define if you have ut_addr_v6 in utmp.h */
+/* #undef HAVE_ADDR_V6_IN_UTMP */
+
+/* Define if you have ut_addr_v6 in utmpx.h */
+/* #undef HAVE_ADDR_V6_IN_UTMPX */
+
+/* Define to 1 if you have the 'arc4random' function. */
+#define HAVE_ARC4RANDOM 1
+
+/* Define to 1 if you have the 'arc4random_buf' function. */
+#define HAVE_ARC4RANDOM_BUF 1
+
+/* Define to 1 if you have the 'arc4random_stir' function. */
+/* #undef HAVE_ARC4RANDOM_STIR */
+
+/* Define to 1 if you have the 'arc4random_uniform' function. */
+#define HAVE_ARC4RANDOM_UNIFORM 1
+
+/* Define to 1 if you have the 'asprintf' function. */
+#define HAVE_ASPRINTF 1
+
+/* OpenBSD's gcc has bounded */
+/* #undef HAVE_ATTRIBUTE__BOUNDED__ */
+
+/* Have attribute nonnull */
+#define HAVE_ATTRIBUTE__NONNULL__ 1
+
+/* compiler supports nonstring attribute */
+#define HAVE_ATTRIBUTE__NONSTRING__ 1
+
+/* OpenBSD's gcc has sentinel */
+/* #undef HAVE_ATTRIBUTE__SENTINEL__ */
+
+/* Define to 1 if you have the 'aug_get_machine' function. */
+/* #undef HAVE_AUG_GET_MACHINE */
+
+/* Define to 1 if you have the 'auth_hostok' function. */
+#define HAVE_AUTH_HOSTOK 1
+
+/* Define to 1 if you have the 'auth_timeok' function. */
+#define HAVE_AUTH_TIMEOK 1
+
+/* Define to 1 if you have the 'b64_ntop' function. */
+/* #undef HAVE_B64_NTOP */
+
+/* Define to 1 if you have the 'b64_pton' function. */
+/* #undef HAVE_B64_PTON */
+
+/* Define if you have the basename function. */
+#define HAVE_BASENAME 1
+
+/* Define to 1 if you have the 'bcopy' function. */
+#define HAVE_BCOPY 1
+
+/* Define to 1 if you have the 'bcrypt_pbkdf' function. */
+/* #undef HAVE_BCRYPT_PBKDF */
+
+/* Define to 1 if you have the 'bindresvport_sa' function. */
+#define HAVE_BINDRESVPORT_SA 1
+
+/* Define to 1 if you have the 'blf_enc' function. */
+/* #undef HAVE_BLF_ENC */
+
+/* Define to 1 if you have the <blf.h> header file. */
+/* #undef HAVE_BLF_H */
+
+/* Define to 1 if you have the 'Blowfish_expand0state' function. */
+/* #undef HAVE_BLOWFISH_EXPAND0STATE */
+
+/* Define to 1 if you have the 'Blowfish_expandstate' function. */
+/* #undef HAVE_BLOWFISH_EXPANDSTATE */
+
+/* Define to 1 if you have the 'Blowfish_initstate' function. */
+/* #undef HAVE_BLOWFISH_INITSTATE */
+
+/* Define to 1 if you have the 'Blowfish_stream2word' function. */
+/* #undef HAVE_BLOWFISH_STREAM2WORD */
+
+/* Define to 1 if you have the 'BN_is_prime_ex' function. */
+#define HAVE_BN_IS_PRIME_EX 1
+
+/* Define to 1 if you have the <bsd/libutil.h> header file. */
+/* #undef HAVE_BSD_LIBUTIL_H */
+
+/* Define to 1 if you have the <bsm/audit.h> header file. */
+/* #undef HAVE_BSM_AUDIT_H */
+
+/* Define to 1 if you have the <bstring.h> header file. */
+/* #undef HAVE_BSTRING_H */
+
+/* Define to 1 if you have the 'bzero' function. */
+#define HAVE_BZERO 1
+
+/* calloc(0, x) returns NULL */
+#define HAVE_CALLOC 1
+
+/* Define if you have caph_cache_tzdata */
+#define HAVE_CAPH_CACHE_TZDATA 1
+
+/* Define to 1 if you have the <capsicum_helpers.h> header file. */
+#define HAVE_CAPSICUM_HELPERS_H 1
+
+/* Define to 1 if you have the 'cap_rights_limit' function. */
+#define HAVE_CAP_RIGHTS_LIMIT 1
+
+/* Define to 1 if you have the 'clock' function. */
+#define HAVE_CLOCK 1
+
+/* Have clock_gettime */
+#define HAVE_CLOCK_GETTIME 1
+
+/* define if you have clock_t data type */
+#define HAVE_CLOCK_T 1
+
+/* Define to 1 if you have the 'closefrom' function. */
+#define HAVE_CLOSEFROM 1
+
+/* Define to 1 if you have the 'close_range' function. */
+#define HAVE_CLOSE_RANGE 1
+
+/* Define if gai_strerror() returns const char * */
+#define HAVE_CONST_GAI_STRERROR_PROTO 1
+
+/* Define if your system uses ancillary data style file descriptor passing */
+#define HAVE_CONTROL_IN_MSGHDR 1
+
+/* Define to 1 if you have the 'crypt' function. */
+#define HAVE_CRYPT 1
+
+/* Define to 1 if you have the <crypto/sha2.h> header file. */
+/* #undef HAVE_CRYPTO_SHA2_H */
+
+/* Define to 1 if you have the <crypt.h> header file. */
+/* #undef HAVE_CRYPT_H */
+
+/* Define if you are on Cygwin */
+/* #undef HAVE_CYGWIN */
+
+/* Define if your libraries define daemon() */
+#define HAVE_DAEMON 1
+
+/* Define to 1 if you have the declaration of 'AI_NUMERICSERV', and to 0 if
+ you don't. */
+#define HAVE_DECL_AI_NUMERICSERV 1
+
+/* Define to 1 if you have the declaration of 'authenticate', and to 0 if you
+ don't. */
+/* #undef HAVE_DECL_AUTHENTICATE */
+
+/* Define to 1 if you have the declaration of 'bzero', and to 0 if you don't.
+ */
+#define HAVE_DECL_BZERO 1
+
+/* Define to 1 if you have the declaration of 'ftruncate', and to 0 if you
+ don't. */
+#define HAVE_DECL_FTRUNCATE 1
+
+/* Define to 1 if you have the declaration of 'getentropy', and to 0 if you
+ don't. */
+#define HAVE_DECL_GETENTROPY 1
+
+/* Define to 1 if you have the declaration of 'getpeereid', and to 0 if you
+ don't. */
+#define HAVE_DECL_GETPEEREID 1
+
+/* Define to 1 if you have the declaration of 'GLOB_NOMATCH', and to 0 if you
+ don't. */
+#define HAVE_DECL_GLOB_NOMATCH 1
+
+/* Define to 1 if you have the declaration of 'GSS_C_NT_HOSTBASED_SERVICE',
+ and to 0 if you don't. */
+/* #undef HAVE_DECL_GSS_C_NT_HOSTBASED_SERVICE */
+
+/* Define to 1 if you have the declaration of 'howmany', and to 0 if you
+ don't. */
+#define HAVE_DECL_HOWMANY 1
+
+/* Define to 1 if you have the declaration of 'htobe32', and to 0 if you
+ don't. */
+#define HAVE_DECL_HTOBE32 1
+
+/* Define to 1 if you have the declaration of 'htole64', and to 0 if you
+ don't. */
+#define HAVE_DECL_HTOLE64 1
+
+/* Define to 1 if you have the declaration of 'h_errno', and to 0 if you
+ don't. */
+#define HAVE_DECL_H_ERRNO 1
+
+/* Define to 1 if you have the declaration of 'INFINITY', and to 0 if you
+ don't. */
+#define HAVE_DECL_INFINITY 1
+
++/* Define to 1 if you have the declaration of 'kSBXProfilePureComputation',
++ and to 0 if you don't. */
++/* #undef HAVE_DECL_KSBXPROFILEPURECOMPUTATION */
++
+/* Define to 1 if you have the declaration of 'le32toh', and to 0 if you
+ don't. */
+#define HAVE_DECL_LE32TOH 1
+
+/* Define to 1 if you have the declaration of 'le64toh', and to 0 if you
+ don't. */
+#define HAVE_DECL_LE64TOH 1
+
+/* Define to 1 if you have the declaration of 'loginfailed', and to 0 if you
+ don't. */
+/* #undef HAVE_DECL_LOGINFAILED */
+
+/* Define to 1 if you have the declaration of 'loginrestrictions', and to 0 if
+ you don't. */
+/* #undef HAVE_DECL_LOGINRESTRICTIONS */
+
+/* Define to 1 if you have the declaration of 'loginsuccess', and to 0 if you
+ don't. */
+/* #undef HAVE_DECL_LOGINSUCCESS */
+
+/* Define to 1 if you have the declaration of 'MAXSYMLINKS', and to 0 if you
+ don't. */
+#define HAVE_DECL_MAXSYMLINKS 1
+
+/* Define to 1 if you have the declaration of 'memmem', and to 0 if you don't.
+ */
+#define HAVE_DECL_MEMMEM 1
+
+/* Define to 1 if you have the declaration of 'NFDBITS', and to 0 if you
+ don't. */
+#define HAVE_DECL_NFDBITS 1
+
+/* Define to 1 if you have the declaration of 'offsetof', and to 0 if you
+ don't. */
+#define HAVE_DECL_OFFSETOF 1
+
+/* Define to 1 if you have the declaration of 'O_NONBLOCK', and to 0 if you
+ don't. */
+#define HAVE_DECL_O_NONBLOCK 1
+
+/* Define to 1 if you have the declaration of 'passwdexpired', and to 0 if you
+ don't. */
+/* #undef HAVE_DECL_PASSWDEXPIRED */
+
+/* Define to 1 if you have the declaration of 'readv', and to 0 if you don't.
+ */
+#define HAVE_DECL_READV 1
+
+/* Define to 1 if you have the declaration of 'setauthdb', and to 0 if you
+ don't. */
+/* #undef HAVE_DECL_SETAUTHDB */
+
+/* Define to 1 if you have the declaration of 'SHUT_RD', and to 0 if you
+ don't. */
+#define HAVE_DECL_SHUT_RD 1
+
+/* Define to 1 if you have the declaration of 'UINT32_MAX', and to 0 if you
+ don't. */
+#define HAVE_DECL_UINT32_MAX 1
+
+/* Define to 1 if you have the declaration of 'writev', and to 0 if you don't.
+ */
+#define HAVE_DECL_WRITEV 1
+
+/* Define to 1 if you have the declaration of '_getlong', and to 0 if you
+ don't. */
+#define HAVE_DECL__GETLONG 0
+
+/* Define to 1 if you have the declaration of '_getshort', and to 0 if you
+ don't. */
+#define HAVE_DECL__GETSHORT 0
+
+/* Define to 1 if you have the declaration of '__builtin_inff', and to 0 if
+ you don't. */
+/* #undef HAVE_DECL___BUILTIN_INFF */
+
+/* Define to 1 if you have the 'DES_crypt' function. */
+#define HAVE_DES_CRYPT 1
+
+/* Define if you have /dev/ptmx */
+/* #undef HAVE_DEV_PTMX */
+
+/* Define if you have /dev/ptc */
+/* #undef HAVE_DEV_PTS_AND_PTC */
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#define HAVE_DIRENT_H 1
+
+/* Define to 1 if you have the 'dirfd' function. */
+#define HAVE_DIRFD 1
+
+/* Define to 1 if you have the 'dirname' function. */
+#define HAVE_DIRNAME 1
+
+/* Define to 1 if you have the 'dlopen' function. */
+#define HAVE_DLOPEN 1
+
*** 14030 LINES SKIPPED ***