git: 7befd68335a0 - main - pvscsi: Explicitly mask out CTS_SAS_VALID_SPEED bit

The branch main has been updated by zlei:

URL: https://cgit.FreeBSD.org/src/commit/?id=7befd68335a0b34405b6293f30cc47cabc46ab06

commit 7befd68335a0b34405b6293f30cc47cabc46ab06
Author:     Zhenlei Huang <zlei@FreeBSD.org>
AuthorDate: 2025-01-15 04:32:31 +0000
Commit:     Zhenlei Huang <zlei@FreeBSD.org>
CommitDate: 2025-01-15 04:32:31 +0000

    pvscsi: Explicitly mask out CTS_SAS_VALID_SPEED bit
    
    This driver prefers connection speed over sas port speed. On stable/13
    branch the stack-allocated CCB is not cleared thus the cam layer may
    report weird speed on boot.
    
    ```
    da0: <VMware Virtual disk 2.0> Fixed Direct Access SPC-4 SCSI device
    da0: 4294967.295MB/s transfers
    ```
    
    -current and stable/14 have the change [1] which clears stack-allocated
    CCB thus are not affected, but I want -current and stable/14 to have this
    fix in to reduce drift between branches.
    
    1. ec5325dbca62 cam: make sure to clear even more CCBs allocated on the stack
    
    Reviewed by:    imp
    MFC after:      3 days
    Differential Revision:  https://reviews.freebsd.org/D48438
---
 sys/dev/vmware/pvscsi/pvscsi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sys/dev/vmware/pvscsi/pvscsi.c b/sys/dev/vmware/pvscsi/pvscsi.c
index 111330e4f17f..08bdb8c3f108 100644
--- a/sys/dev/vmware/pvscsi/pvscsi.c
+++ b/sys/dev/vmware/pvscsi/pvscsi.c
@@ -1444,6 +1444,10 @@ finish_ccb:
 		cts->proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB;
 		cts->proto_specific.scsi.valid = CTS_SCSI_VALID_TQ;
 
+		/* Prefer connection speed over sas port speed */
+		cts->xport_specific.sas.valid &= ~CTS_SAS_VALID_SPEED;
+		cts->xport_specific.sas.bitrate = 0;
+
 		ccb_h->status = CAM_REQ_CMP;
 		xpt_done(ccb);
 	} break;