git: 2533eca1c2b9 - main - vt(4): Connect to teken's TP_SETBELLPD
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Wed, 03 Nov 2021 22:04:17 UTC
The branch main has been updated by imp: URL: https://cgit.FreeBSD.org/src/commit/?id=2533eca1c2b9d561c42d28bcb6f1c1c35562fbcc commit 2533eca1c2b9d561c42d28bcb6f1c1c35562fbcc Author: Warner Losh <imp@FreeBSD.org> AuthorDate: 2021-11-03 21:55:42 +0000 Commit: Warner Losh <imp@FreeBSD.org> CommitDate: 2021-11-03 22:03:51 +0000 vt(4): Connect to teken's TP_SETBELLPD Add the glue needed to listen to TP_SETBELLPD which teken uses to inform its client drivers about the results of parsing \e[=<pitch>;<duration>B. It converts these to a Hz value for the tone/pitch of the bell and a duration in ms. There's some loss of precision because <pitch> in the escape seuquence is defined to be (1193182 / pitch) Hz and <duration> is in 10ms units. Also note that kbdcontrol also parses 'off' but then doesn't send the proper escape sequence, leading me to wonder if that's another bug since teken appears to parse that sequence properly and I've added code here to treat that as the same as quiet or disabled. In general, Hz from 100 to 2000 is good. Outside that range is possible, but even at 100Hz the square wave is starting to sound bad and above 2000Hz the speaker may not respond. Reviewed by: mav Differential Revision: https://reviews.freebsd.org/D32620 --- sys/dev/vt/vt.h | 2 ++ sys/dev/vt/vt_core.c | 13 ++++++++++++- 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/sys/dev/vt/vt.h b/sys/dev/vt/vt.h index 8a74fd97a4e0..5ba64388bd27 100644 --- a/sys/dev/vt/vt.h +++ b/sys/dev/vt/vt.h @@ -308,6 +308,8 @@ struct vt_window { struct vt_mode vw_smode; /* switch mode */ struct callout vw_proc_dead_timer; struct vt_window *vw_switch_to; + int vw_bell_pitch; /* (?) Bell pitch */ + sbintime_t vw_bell_duration; /* (?) Bell duration */ }; #define VT_AUTO 0 /* switching is automatic */ diff --git a/sys/dev/vt/vt_core.c b/sys/dev/vt/vt_core.c index 567cdd2890d5..a197c8e8be68 100644 --- a/sys/dev/vt/vt_core.c +++ b/sys/dev/vt/vt_core.c @@ -257,6 +257,8 @@ static struct vt_window vt_conswindow = { .vw_terminal = &vt_consterm, .vw_kbdmode = K_XLATE, .vw_grabbed = 0, + .vw_bell_pitch = VT_BELLPITCH, + .vw_bell_duration = VT_BELLDURATION, }; struct terminal vt_consterm = { .tm_class = &vt_termclass, @@ -1100,7 +1102,11 @@ vtterm_bell(struct terminal *tm) if (vd->vd_flags & VDF_QUIET_BELL) return; - sysbeep(VT_BELLPITCH, VT_BELLDURATION); + if (vw->vw_bell_pitch == 0 || + vw->vw_bell_duration == 0) + return; + + sysbeep(vw->vw_bell_pitch, vw->vw_bell_duration); } static void @@ -1177,6 +1183,11 @@ vtterm_param(struct terminal *tm, int cmd, unsigned int arg) case TP_MOUSE: vw->vw_mouse_level = arg; break; + case TP_SETBELLPD: + vw->vw_bell_pitch = TP_SETBELLPD_PITCH(arg); + vw->vw_bell_duration = + TICKS_2_MSEC(TP_SETBELLPD_DURATION(arg)) * SBT_1MS; + break; } }