Re: git: b0b4d9e1eae8 - main - */*: Switch to NumPy 2.x

Vladimir Druzenko wrote:
> 06.05.2026 21:14, Vladimir Druzenko пишет:
>> 06.05.2026 20:29, Max Brazhnikov пишет:
>>> On Wed, 6 May 2026 01:04:14 +0300 Vladimir Druzenko wrote:
>>>> Hello!
>>>>
>>>> 05.05.2026 22:33, Max Brazhnikov пишет:
>>>>> The branch main has been updated by makc:
>>>>>
>>>>> URL: https://cgit.FreeBSD.org/ports/commit/? 
>>>>> id=b0b4d9e1eae890d0de1591e20fb37358439a2ff6
>>>>>
>>>>> commit b0b4d9e1eae890d0de1591e20fb37358439a2ff6
>>>>> Author:     Max Brazhnikov <makc@FreeBSD.org>
>>>>> AuthorDate: 2026-05-05 19:27:15 +0000
>>>>> Commit:     Max Brazhnikov <makc@FreeBSD.org>
>>>>> CommitDate: 2026-05-05 19:29:37 +0000
>>>>>
>>>>>       */*: Switch to NumPy 2.x
>>>>>             PR:             294328
>>>>>       Exp-run:        antoine
>>>>> ---
>>>>>    archivers/py-bitshuffle/Makefile            | 4 ++--
>>>>>    archivers/py-blosc2/Makefile                | 4 ++--
>>>>>    astro/astrometry/Makefile                   | 4 ++--
>>>> By default NumPy 2.x builds with X86_V2, configure log:
>>>> CPU Optimization Options
>>>>     baseline:
>>>>       Requested : min+detect
>>>>       Enabled   : X86_V2
>>>>     dispatch:
>>>>       Requested : max
>>>>       Enabled   : X86_V3 X86_V4 AVX512_ICL
>>>>
>>>> So numpy-config fails with SIGILL.
>>>> Valgrid prints:
>>>> RuntimeError: NumPy was built with baseline optimizations:
>>>> (X86_V2) but your machine doesn't support:
>>>> (X86_V2).
>>>>
>>>> Patch:
>>>> diff --git a/math/py-numpy/Makefile b/math/py-numpy/Makefile
>>>> index 9500c87da243..961f1e03ff86 100644
>>>> --- a/math/py-numpy/Makefile
>>>> +++ b/math/py-numpy/Makefile
>>>> @@ -1,6 +1,6 @@
>>>>    PORTNAME=      numpy
>>>>    DISTVERSION=   2.4.4
>>>> -PORTREVISION=  2
>>>> +PORTREVISION=  3
>>>>    PORTEPOCH=     1
>>>>    CATEGORIES=    math python
>>>>    MASTER_SITES=  PYPI \
>>>> @@ -24,7 +24,9 @@ TEST_DEPENDS=
>>>> ${PYTHON_PKGNAMEPREFIX}hypothesis>=5.3.0:devel/py-hypothesis@${PY_
>>>>    USES=          compiler:c++17-lang cpe fortran pkgconfig 
>>>> python:3.11+
>>>> shebangfix
>>>>    USE_PYTHON=    autoplist concurrent cython pep517 pytest
>>>>
>>>> -PEP517_BUILD_CONFIG_SETTING= -Csetup-args=-Dallow-noblas=false
>>>> +PEP517_BUILD_CONFIG_SETTING= -Csetup-args=-Dallow-noblas=false \
>>>> + -Csetup-args=-Dcpu-baseline="none" \
>>>> +  -Csetup-args=-Dcpu-baseline-detect="disabled"
>>> Defining only -Dcpu-baseline="none" should be enough. Could you check 
>>> whether
>>> it resolves the problem for you?
>>>
>>> Max
>>
>> You are right, -Dcpu-baseline="none" is enough.
>> The -Csetup-args=-Dcpu-baseline-detect="disabled" option causes - 
>> march=* to be ignored when baseline detection occurs (if the user 
>> added CPUTYPE=* to the make.conf).
>> So in order to respect -march this option should not be added. 
> 
> Hello!
> Can I commit this change?
> 
Not yet. Still needs some further evaluation.

-- 
Charlie Li
...nope, still don't have an exit line.