git: 2a6e98ddddc1 - main - audio/shairport-sync: Update to 5.5

The branch main has been updated by ehaupt:

URL: https://cgit.FreeBSD.org/ports/commit/?id=2a6e98ddddc1b0d65c32dc78e0fac8c00a8cd175

commit 2a6e98ddddc1b0d65c32dc78e0fac8c00a8cd175
Author:     Emanuel Haupt <ehaupt@FreeBSD.org>
AuthorDate: 2026-09-07 15:42:55 +0000
Commit:     Emanuel Haupt <ehaupt@FreeBSD.org>
CommitDate: 2026-09-07 15:43:00 +0000

    audio/shairport-sync: Update to 5.5
    
    * Update to 5.5
    * Enable SNDIO by default
    * Remove incorrect SNDIO deprecation notice
    * Add guidance for selecting the sndio output device on FreeBSD
    
    The sndio backend is supported upstream and should not be confused with
    the deprecated soundio backend.
    
    On FreeBSD, sndio's default device does not necessarily correspond to
    the default sound device reported by /dev/sndstat. Add a conditional
    pkg-message with guidance for explicitly selecting the desired device.
---
 audio/shairport-sync/Makefile             | 10 ++++----
 audio/shairport-sync/distinfo             |  6 ++---
 audio/shairport-sync/files/pkg-message.in | 39 ++++++++++++++++++++++++++-----
 3 files changed, 42 insertions(+), 13 deletions(-)

diff --git a/audio/shairport-sync/Makefile b/audio/shairport-sync/Makefile
index 9ff023c4ea26..e73cf45f65ae 100644
--- a/audio/shairport-sync/Makefile
+++ b/audio/shairport-sync/Makefile
@@ -1,5 +1,5 @@
 PORTNAME=	shairport-sync
-DISTVERSION=	5.2.3
+DISTVERSION=	5.5
 CATEGORIES=	audio
 
 MAINTAINER=	ehaupt@FreeBSD.org
@@ -34,12 +34,15 @@ CONFIGURE_ENV+=	SSL_CFLAGS=-I${OPENSSLINC} \
 
 LDFLAGS+=	-lcrypto
 
+SUB_FILES=	pkg-message
+
 OPTIONS_DEFINE=		AIRPLAY2 ALAC ALSA MQTT PULSEAUDIO SNDIO
-OPTIONS_DEFAULT=	AIRPLAY2
+OPTIONS_DEFAULT=	AIRPLAY2 SNDIO
+OPTIONS_SUB=		yes
 AIRPLAY2_DESC=		Build with AirPlay 2 protocol support
 ALAC_DESC=		Build with libalac support (experimental)
 MQTT_DESC=		Build with MQTT protocol support
-SNDIO_DESC=		Sndio audio support (DEPRECATED upstream)
+SNDIO_DESC=		Sndio audio support
 
 AIRPLAY2_BUILD_DEPENDS=	vim:editors/vim
 AIRPLAY2_LIB_DEPENDS=	libavutil.so:multimedia/ffmpeg \
@@ -49,7 +52,6 @@ AIRPLAY2_LIB_DEPENDS=	libavutil.so:multimedia/ffmpeg \
 			libuuid.so:misc/libuuid
 AIRPLAY2_RUN_DEPENDS=	nqptp:net/nqptp
 AIRPLAY2_CONFIGURE_ON=	--with-airplay-2
-AIRPLAY2_SUB_FILES=	pkg-message
 
 ALAC_LIB_DEPENDS=	libalac.so:audio/alac
 ALAC_CONFIGURE_ON=	--with-apple-alac
diff --git a/audio/shairport-sync/distinfo b/audio/shairport-sync/distinfo
index d7043143ee49..ad6d9f7f3592 100644
--- a/audio/shairport-sync/distinfo
+++ b/audio/shairport-sync/distinfo
@@ -1,3 +1,3 @@
-TIMESTAMP = 1787858778
-SHA256 (mikebrady-shairport-sync-5.2.3_GH0.tar.gz) = 890eacbcba979a1f20ba92076310757a01adaa03161713c6d603d9bd54ba8898
-SIZE (mikebrady-shairport-sync-5.2.3_GH0.tar.gz) = 647139
+TIMESTAMP = 1788769523
+SHA256 (mikebrady-shairport-sync-5.5_GH0.tar.gz) = 5fcce2ee6b6fbda5fcfb381d0000ab799ec7ce4c285098da6bef82a17237945f
+SIZE (mikebrady-shairport-sync-5.5_GH0.tar.gz) = 647803
diff --git a/audio/shairport-sync/files/pkg-message.in b/audio/shairport-sync/files/pkg-message.in
index 4bad0dc95f7f..1e1a9c66829f 100644
--- a/audio/shairport-sync/files/pkg-message.in
+++ b/audio/shairport-sync/files/pkg-message.in
@@ -1,11 +1,38 @@
-[   
+[
 { type: install
-  message: <<EOM
+message: <<EOM
 
-Shairport sync is using AirPlay 2. Please make sure you enable and start nqptp.
-
-    # sysrc nqptp_enable=YES
-    # service nqptp start
+%%AIRPLAY2%%Shairport Sync is using AirPlay 2. Please make sure you enable and start nqptp.
+%%AIRPLAY2%%
+%%AIRPLAY2%%# sysrc nqptp_enable=YES
+%%AIRPLAY2%%# service nqptp start
+%%AIRPLAY2%%
+%%SNDIO%%The sndio "default" device does not necessarily correspond to the
+%%SNDIO%%default FreeBSD sound device shown by /dev/sndstat. If Shairport Sync
+%%SNDIO%%is visible to AirPlay clients but exits when playback starts with an
+%%SNDIO%%error such as:
+%%SNDIO%%
+%%SNDIO%%output configuration search for request: S16/44100/2 failed
+%%SNDIO%%
+%%SNDIO%%check the available sound devices with:
+%%SNDIO%%
+%%SNDIO%%# cat /dev/sndstat
+%%SNDIO%%
+%%SNDIO%%and explicitly select the desired sndio device in:
+%%SNDIO%%
+%%SNDIO%%%%PREFIX%%/etc/shairport-sync.conf
+%%SNDIO%%
+%%SNDIO%%For example, if the desired device corresponds to rsnd/8:
+%%SNDIO%%
+%%SNDIO%%sndio =
+%%SNDIO%%{
+%%SNDIO%% device = "rsnd/8";
+%%SNDIO%% output_rate = 48000;
+%%SNDIO%% output_format = "S16_LE";
+%%SNDIO%% output_channels = 2;
+%%SNDIO%%};
+%%SNDIO%%
+%%SNDIO%%Adjust the rsnd device number as appropriate for the system.
 EOM
 }
 ]