git: 2cc4a1675ec9 - main - UPDATING: Trim upto stable/10 release
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 06 May 2023 14:39:11 UTC
The branch main has been updated by bofh:
URL: https://cgit.FreeBSD.org/ports/commit/?id=2cc4a1675ec9739de14b5695f786a5fa211041a5
commit 2cc4a1675ec9739de14b5695f786a5fa211041a5
Author: Muhammad Moinur Rahman <bofh@FreeBSD.org>
AuthorDate: 2023-05-05 19:13:17 +0000
Commit: Muhammad Moinur Rahman <bofh@FreeBSD.org>
CommitDate: 2023-05-06 14:39:01 +0000
UPDATING: Trim upto stable/10 release
Approved by: portmgr
---
UPDATING | 3491 --------------------------------------------------------------
1 file changed, 3491 deletions(-)
diff --git a/UPDATING b/UPDATING
index 2c38fddde2f2..66dbb95d30b2 100644
--- a/UPDATING
+++ b/UPDATING
@@ -11975,3494 +11975,3 @@ leave you without networking.
If you are interested in upgrading now already, we have instructions
at <https://wiki.freebsd.org/Ports/BerkeleyDBCleanup>.
-
-20131209:
- AFFECTS: users of dns/bind96, dns/bind98 and bind99 on FreeBSD 10.0
- AUTHOR: erwin@FreeBSD.org
-
- Bind versions before 9.6.3.2.ESV.R10_2, 9.8.6_2, and 9.9.4_2 on
- FreeBSD 10.0 will replace named.conf on upgrade. Make sure to
- backup any local changes before upgrading to the _2 versions.
-
-20131208:
- AFFECTS: users of java/subversion-java
- AUTHOR: ohauer@FreeBSD.org
-
- java/subversion-java was moved to java/java-subversion.
- Please do the following according to package manager used.
-
- # portmaster -o java/java-subversion java/subversion-java
- or
- # portupgrade -fo java/java-subversion java/subversion-java
- or
- # pkg set -o java/subversion-java:java/java-subversion
-
-20131208:
- AFFECTS: users of x11-toolkits/vte
- AUTHOR: kwm@FreeBSD.org
-
- The gnome-pty-helper program has been split off from the vte package
- to allow both vte and vte3 to be installed at the same time. To update
- after this change please do the following:
-
- # pkg_delete -f vte\*
- or
- # pkg delete -fg vte\*
- followed by
- # portmaster x11-toolkits/vte
- or
- # portupgrade x11-toolkits/vte
-
-20131207:
- AFFECTS: users of mail/opensmtpd
- AUTHOR: ashish@FreeBSD.org
-
- There has been changes to the OpenSMTPD configuration. Please refer to
- smtpd.conf(5), and use "smtpd -nf smtpd.conf" to validate.
-
-20131203:
- AFFECTS: users of graphics/opencv, graphics/opencv-core
- AUTHOR: jhale@FreeBSD.org
-
- OpenCV has been updated to 2.4.7. Due to movement of files between the
- opencv port and the opencv-core port, it will be necessary to remove
- both packages before updating.
-
- # pkg_delete -f opencv\*
- or
- # pkg delete -fg opencv\*
- followed by
- # portmaster -a
- or
- # portupgrade -a
-
-20131127:
- AFFECTS: users of devel/py-distribute (i.e you)
- AUTHOR: wg@FreeBSD.org
-
- devel/py-distribute was replaced with devel/py-setuptools. Please do
- the following according to package manager used. py-distribute port
- will be removed shortly.
-
- # portmaster -o devel/py-setuptools devel/py-distribute
- or
- # portupgrade -fo devel/py-setuptools devel/py-distribute
- or
- # pkg set -o devel/py-distribute:devel/py-setuptools
- # pkg install -f devel/py-setuptools
-
-20131125:
- AFFECTS: users of www/mod_wsgi
- AUTHOR: ohauer@FreeBSD.org
-
- The port www/mod_wsgi moved to www/mod_wsgi2 to reflect the port version.
-
- # portmaster -o www/mod_wsgi2 www/mod_wsgi
- or
- # portupgrade -fo www/mod_wsgi2 www/mod_wsgi
- or
- # pkg set -o www/mod_wsgi:www/mod_wsgi2
-
-20131120:
- AFFECTS: users of lang/perl5.12 lang/perl5.14 lang/perl5.16 and lang/perl5.18
- AUTHOR: mat@FreeBSD.org
-
- The THREADS option has been enabled by default in all Perl. If you're using
- binary packages you need to do :
-
- # pkg install -Rf perl5
-
- If you're not using binary packages, and want to switch from non threaded
- Perl to threaded Perl, you need to recompile and reinstall most ports
- depending on Perl. Supposing you have Perl 5.16, you would do:
-
- Portupgrade users:
- 0) Fix pkgdb.db (for safety):
- pkgdb -Ff
-
- 1) Change the option in lang/perl5.16:
- make -C /usr/ports/lang/perl5.16 config
-
- 2) Reinstall everything that depends on Perl:
- portupgrade -fr lang/perl5.16
-
- Portmaster users:
- 1) Change the option in lang/perl5.16:
- make -C /usr/ports/lang/perl5.16 config
-
- 2) Reinstall everything that depends on Perl:
- portmaster -r perl5-
-
- Note: The installed Perl package was named perl and is now named perl5, if
- you have not updated your installation in a long time, you may need to
- use "perl-" here.
-
-20131112:
- AFFECTS: users of dns/nsd
- AUTHOR: erwin@FreeBSD.org
-
- dns/nsd was updated to the new 4.0.0 major release.
-
- This version replaces the nsdc control program with nsd-control.
- This requires some manual setup with nsd-control-setup and editing
- of the config files. nsd-control is incompatible with nsdc so when
- that is used in scripts, these should be adapted. More information:
- http://www.nlnetlabs.nl/svn/nsd/tags/NSD_4_0_0_REL/doc/NSD-4-features
-
- NSD version 3 is still supported in dns/nsd3. To keep the old
- version:
- # portmaster -o dns/nsd3 dns/nsd
- or
- # portupgrade -fo dns/nsd3 dns/nsd
- or
- # pkg set -o dns/nsd:dns/nsd3
-
-20131112:
- AFFECTS: users of dns/bind9*
- AUTHOR: erwin@FreeBSD.org
-
- All bind9 ports have been updated to support FreeBSD 10.x after
- BIND was removed from the base system. It is now self-contained
- in ${PREFIX}/etc/namedb, and chroot and symlinking options are
- no longer supported out of the box.
-
- For users of FreeBSD 9.x and earlier, the LINKS option is no longer
- enabled by default, but still supported. No other changes should
- affect those users, and updating without changing already set options
- will keep the system in the same state.
-
-20131103:
- AFFECTS: users of security/libtasn1 and any port that depends on it
- AUTHOR: novel@FreeBSD.org
-
- libtasn1 has been updated to 3.3 and all shared libraries versions have
- been bumped. So you need to rebuild all applications that depend on
- libtasn1.
-
- # portmaster -r libtasn1
- or
- # portupgrade -fr security/libtasn1
- or
- # pkg install -fR security/libtasn1
-
-20131031:
- AFFECTS: users of multimedia/rtmpdump
- AUTHOR: hrs@FreeBSD.org
-
- The library part of multimedia/rtmpdump is split into multimedia/librtmp.
- multimedia/rtmpdump now depends on the library port.
-
- A build error can occur if you built and installed old rtmpdump by
- using stock OpenSSL, and then install security/openssl and try to build
- multimedia/rtmpdump without deinstalling the installed one. Please
- make sure if the old rtmpdump is removed before building the new version.
-
-20131028:
- AFFECTS: users of comms/dcf77pi
- AUTHOR: rene@FreeBSD.org
-
- As of version 1.0.5 the configuration file was renamed from
- hardware.txt to config.txt and the format has been made more flexible.
-
- If you have customized any parameters, be sure to copy them to
- config.txt after which hardware.txt can be removed.
-
-20131028:
- AFFECTS: users of multimedia/ffmpeg1 and multimedia/ffmpeg-devel
- AUTHOR: wg@FreeBSD.org
-
- The port ffmpeg was updated, ffmpeg1 and ffmpeg-devel were removed in
- favor of ffmpeg.
-
- # portmaster -o multimedia/ffmpeg multimedia/ffmpeg1
- or
- # portupgrade -fo multimedia/ffmpeg multimedia/ffmpeg1
- or
- # pkg set -o multimedia/ffmpeg1:multimedia/ffmpeg
-
- and
-
- # portmaster -o multimedia/ffmpeg multimedia/ffmpeg-devel
- or
- # portupgrade -fo multimedia/ffmpeg multimedia/ffmpeg-devel
- or
- # pkg set -o multimedia/ffmpeg-devel:multimedia/ffmpeg
-
-20131023:
- AFFECTS: users of lang/perl5.12 lang/perl5.14
- AUTHOR: mat@FreeBSD.org
-
- The default Perl has been switched to lang/perl5.16. These examples
- are for switching from lang/perl5.14, if you are running another
- version, replace lang/perl5.14 with the origin of the Perl you have
- installed.
-
- Pkgng users:
-
- # pkg set -o lang/perl5.14:lang/perl5.16
- # pkg install -Rf lang/perl5.16
-
- Portupgrade users:
- 0) Fix pkgdb.db (for safety):
- pkgdb -Ff
-
- 1) Reinstall new version of Perl (5.16):
- portupgrade -o lang/perl5.16 -f lang/perl5.14
-
- 2) Reinstall everything that depends on Perl:
- portupgrade -fr lang/perl5.16
-
- Portmaster users:
- portmaster -o lang/perl5.16 lang/perl5.14
-
- Conservative:
- portmaster p5-
-
- Comprehensive (but perhaps overkill):
- portmaster -r perl-
-
- Note: If the "perl-" glob matches more than one port you will need to specify
- the name of the Perl directory in /var/db/pkg explicitly.
-
-20131020:
- AFFECTS: users of mail/squirrelmail
- AUTHOR: adamw@adamw.org
-
- The default location for user data files and attachments has changed.
- This will only affect new installations, and upgrading SquirrelMail
- WILL NOT break your current installation.
-
- To make use of the new locations, do the following:
-
- # cp -rp /var/spool/squirrelmail/pref/* /usr/local/www/squirrelmail/data
- # cp -rp /var/spool/squirrelmail/attach/* /usr/local/www/squirrelmail/attach
-
- and then run /usr/local/www/squirrelmail/configure and tell SM about
- it ("Data Directory" and "Attachment Directory" under "General Options").
-
- This version of SquirrelMail is a SNAPSHOT that brings in PHP 5.4 and 5.5
- compatibility.
-
-20131020:
- AFFECTS: users of security/gpgme
- AUTHOR: jhale@FreeBSD.org
-
- The library version of security/gpgme has changed, and PORTREVISION has
- been bumped in all dependent ports. If you have external software that
- depends on gpgme, this software needs to be recompiled.
- To recompile all software dependent on gpgme, run:
-
- # portmaster -r gpgme
- or
- # portupgrade -rf gpgme
-
-20131008:
- AFFECTS: all users
- AUTHOR: bapt@FreeBSD.org
-
- A new USES has been added: compiler.mk, this uses allows porters to
- select a compiler for a given port based on the features the port needs
- By default this will always try to find Clang > 3.3.
- If the user prefers using GCC then the following macro should be added
- to user's make.conf: FAVORITE_COMPILER=gcc
-
-20131004:
- AFFECTS: users of net-mgmt/nrpe2
- AUTHOR: ohauer@FreeBSD.org
-
- The port nrpe2 was updated and moved to nrpe
-
- # portmaster -o net-mgmt/nrpe net-mgmt/nrpe2
- or
- # portupgrade -fo net-mgmt/nrpe net-mgmt/nrpe2
- or
- # pkg set -o net-mgmt/nrpe2:net-mgmt/nrpe
-
-20131003:
- AFFECTS: users of lang/python* and ports
- AUTHOR: mva@FreeBSD.org
-
- The default versions of lang/python* have been changed to support the
- new DEFAULT_VERSIONS variable.
-
- PYTHON_DEFAULT_VERSION, PYTHON2_DEFAULT_VERSION and
- PYTHON3_DEFAULT_VERSION are deprecated. If you have set them in your
- make.conf, you should change them something like
-
- DEFAULT_VERSIONS=python=2.7 python2=2.7 python3=3.3
-
-20130929:
- AFFECTS: users of x11/pixman
- AUTHOR: zeising@FreeBSD.org
-
- The library version of x11/pixman has changed, and PORTREVISION has
- been bumped in all dependent ports. If you have external software that
- depends on pixman, this software needs to be recompiled.
- To recompile all software dependent on pixman, run:
-
- # portmaster -r pixman
- or
- # portupgrade -rf pixman
-
-20130929:
- AFFECTS: users of graphics/libGL, graphics/dri and other MESA ports
- AUTHOR: zeising@FreeBSD.org
-
- The graphics/libGL, graphics/dri and related MESA ports have been
- updated to 9.1 when compiled with WITH_NEW_XORG= set. It is necessary
- to remove the old versions of both ports before updating.
-
- # pkg_delete -f libGL-\* dri-\*
- or
- # pkg delete -f libGL dri
- followed by
- # portmaster -a
-
-20130925:
- AFFECTS: users of print/qpdf
- AUTHOR: d.y.kazarov@mail.ru
-
- Due to the changes in libqpdf.so, please deinstall qpdf first if you
- are updating from 4.0.0 to 4.0.1+
-
-20130920:
- AFFECTS: users of ptlib, opal and/or ekiga
- AUTHOR: kwm@FreeBSD.org
-
- The ptlib26, opal3 and ekiga3 ports where updated to the latest version
- and moved to the location of the old ports. If the ekiga (2.0) port is
- installed the same line as for ekiga3 can be used except without the 3 at
- the end.
-
- # portmaster -o devel/ptlib devel/ptlib26
- # portmaster -o net/opal net/opal3
- # portmaster -o net/ekiga3 net-im/ekiga
- or
- # portupgrade -fo devel/ptlib devel/ptlib26
- # portupgrade -fo net/opal net/opal3
- # portupgrade -fo net/ekiga3 net-im/ekiga
- or
- # pkg set -o devel/ptlib26 devel/ptlib
- # pkg set -o net/opal3 net/opal
- # pkg set -o net/ekiga3 net-im/ekiga
-
-20130920:
- AFFECTS: users of ports
- AUTHOR: bapt@FreeBSD.org
-
- New way to override the default version of a language in the ports
- tree.
-
- The make variable, DEFAULT_VERSIONS, allows users to override the
- default version defined by the ports tree.
-
- For example, to declare specific versions for Perl, Ruby and Tcl/Tk,
- it would be defined as:
-
- DEFAULT_VERSIONS= perl5=5.18 ruby=2.0 tcltk=8.6
-
- Today, this only is supported by Perl, Ruby, and Tcl/Tk.
-
-20130920:
- AFFECTS: users of ports
- AUTHOR: bdrewery@FreeBSD.org
-
- Optional Stack Protector [1] support has been added with the WITH_SSP_PORTS
- knob.
-
- WITH_SSP_PORTS= yes
-
- This currently is only supported on FreeBSD 10 amd64/i386 and earlier
- releases on amd64.
-
- The default SSP_CLFAGS is -fstack-protector, but -fstack-protector-all
- may optionally be set instead.
-
- To enable support, add WITH_SSP_PORTS=yes to your make.conf and rebuild all
- ports.
-
- # portmaster -af
- or
- # portupgrade -af
-
- [1] https://en.wikipedia.org/wiki/Buffer_overflow_protection
-
-20130904:
- AFFECTS: 10-CURRENT users with any port depending on converters/libiconv
- AUTHOR: madpilot@FreeBSD.org
-
- 10-CURRENT after r254273 (committed on August 13, 2013) has an
- implementation of iconv enabled by default in libc.
-
- NOTE: after r341775 (committed on January 29, 2014) and other
- following commits, a few ports, including devel/glib20, depend
- on the converters/libiconv again due to missing functionality in the
- base iconv implementation.
-
- Due to this change some major overhauling of the ports tree has
- been necessary to move the ports to using that implementation.
-
- People using pkgng binary packages should have little problems,
- "pkg upgrade" will update all software to not depend on libiconv
- anymore, once updated packages are available. Please make sure to
- perform a "pkg autoremove" after that and check that libiconv is
- correctly removed by it.
-
- If you are using ports the update requires some manual intervention.
- The following procedure should be followed:
-
- # pkg query %ro libiconv >ports_to_update
- # pkg delete -f libiconv
- # cat ports_to_update | xargs portmaster
-
- or:
-
- # pkg query %ro libiconv >ports_to_update
- # pkg delete -f libiconv
- # cat ports_to_update | xargs portupgrade -f
-
-20130831:
- AFFECTS: users of graphics/gdal
- AUTHOR: sunpoet@FreeBSD.org
-
- Due to changes in header files, please deinstall gdal first while updating
- from 1.9.x to 1.10.x.
-
-20130830:
- AFFECTS: users of mail/meta1
- AUTHOR: dinoex@FreeBSD.org
-
- The on disk format has changed.
- Please make sure that queue is empty before you update.
-
-20130817:
- AFFECTS: users of lang/python*
- AUTHOR: mva@FreeBSD.org
-
- The lang/python* ports do not install links to 2to3, idle, pydoc, python
- and other binaries anymore. Those were moved into the lang/python2 and
- lang/python3 ports respectively. This change brings us closer to the goal
- of making Python ports usable with different Python versions at the same
- time.
-
- If you have lang/python2* or lang/python3* installed, please also install
- the associated lang/python2 or lang/python3 port.
-
- 1. update lang/python2* and/or lang/python3*
- 2. install lang/python2 and/or lang/python3
- 3. install/update lang/python
-
-20130816:
- AFFECTS: users of graphics/opendx and math/octave-forge-octcdf
- AUTHOR: stephen@FreeBSD.org
-
- These two ports have changed the science/netcdf dependency to
- science/netcdf4. It is recommended that the science/netcdf package
- be deinstalled before rebuilding these ports, otherwise you are likely
- to face port conflicts when building future ports.
-
-20130806:
- AFFECTS: users of devel/eric4
- AUTHOR: bsam@FreeBSD.org
-
- Since PKGVERSION=4.5.13_1 the default file destination has changed from
- ${PYTHON_SITELIBDIR}/eric4 to ${DATADIR}.
-
-20130731:
- AFFECTS: users of glib20
- AUTHOR: kwm@FreeBSD.org
-
- The devel/gio-fam-backend port was removed in the glib 2.36 update.
- Since the gio-fam-backend port was used in USE_GNOME=glib20, all
- dependencies need to be rebuilt. The removal of gio-fam-backend isn't
- critical, glib20 using programs should work just fine if the port is still
- installed. It is not clear however, if glib20 will use the new kqueue
- backend or the old fam backend.
-
- Note that users of pkg packages can just run the pkg delete command after
- their next update.
-
- # portmaster -r gio-fam-backend
- # pkg_delete gio-fam-backend-\* (for pkgng: pkg delete gio-fam-backend)
- # portmaster -a
-
- or
-
- # portupgrade -rf gio-fam-backend
- # pkg_delete gio-fam-backend-\* (for pkgng: pkg delete gio-fam-backend)
- # portupgrade -a
-
-20130726:
- AFFECTS: users of Qt 3 and KDE 3
- AUTHOR: rene@FreeBSD.org
-
- All ports based on Qt 3 (including KDE 3 but also ports which used Qt 3
- as a graphical toolkit) expired on 20130701 because Qt 3 and KDE 3 were
- no longer maintained upstream. These ports have been removed today.
-
- Users of KDE 3 are advised to switch to another desktop environment
- provided in the Ports Collection, e.g. KDE 4 or Xfce.
-
- Users of Qt 3 are advised to upgrade to the Qt 4 counterpart(s).
-
-20130725:
- AFFECTS: users of net/openafs
- AUTHOR: bjk@FreeBSD.org
-
- The OpenAFS 1.6.5 release is a security release which requires substantial
- configuration changes to the AFS servers in addition to the software update,
- in order to be fully protected. The entry for OPENAFS-SA-2013-003 on
- http://www.openafs.org/security/ has links to the upgrade documentation.
- The procedure involves rekeying the cell to a non-DES krb5 key, stored in
- a krb5 keytab named rxkad.keytab in PREFIX/etc/openafs/server/.
-
-20130720:
- AFFECTS: users of japanese/mozc-server and japanese/mozc-el
- AUTHOR: hrs@FreeBSD.org
-
- The bin/mozc_emacs_helper program is now built and installed by
- japanese/mozc-server because the build processes are heavily
- overlapped with each other and the helper program does not depend on
- most of what mozc-server does actually. To upgrade them, please remove
- mozc-el first to prevent a conflict with the installed bin/mozc_emacs_helper.
-
-20130719:
- AFFECTS: users of sysutils/bacula-server, sysutils/bacula-client, sysutils/bacula-bat
- AUTHOR: dvl@FreeBSD.org
-
- The configuration files for bacula have been moved to PREFIX/etc/bacula.
- Move your existing configuration files to this directory after
- upgrading.
-
-20130718:
- AFFECTS: users of security/logcheck
- AUTHOR: glarkin@FreeBSD.org
-
- The logcheck port now provides a configuration option controlling
- installation of the crontab file. When installing the port interactively,
- the port option is enabled by default to mimic previous behavior.
-
- When the port is installed non-interactively (BATCH=yes) the crontab
- file *will not* be installed automatically. If the EXAMPLES port option
- is enabled, the crontab file can be installed manually at a later time
- from EXAMPLESDIR/crontab.in.
-
-20130718:
- AFFECTS: users of www/zend-framework
- AUTHOR: wg@FreeBSD.org
-
- zend-framework has been updated to 2.2.1 and old 1.12.0 has been copied
- to www/zend-framework1. If you wish to stay with the older version run:
-
- # portmaster -o www/zend-framework1 www/zend-framework
- or
- # portupgrade -fo www/zend-framework1 www/zend-framework
- or
- # pkg set -o www/zend-framework:www/zend-framework1
-
-20130714:
- AFFECTS: users of net/avahi-gtk
- AUTHOR: kwm@FreeBSD.org
-
- Avahi was updated to 0.6.31, due to changes in the avahi-gtk port it will
- be necessary to remove the avahi-gtk port before updating.
- Users of pkg packages can skip this step.
-
- # pkg_delete -f avahi-gtk\*
- or
- # pkg delete -f avahi-gtk
- followed by
- # portmaster net/avahi-gtk
- or
- # portupgrade net/avahi-gtk
-
-20130711:
- AFFECTS: users of dns/py-ldns
- AUTHOR: mat@FreeBSD.org
-
- The dns/py-ldns port now only installs the Python bits, and depends on
- dns/ldns. Because of that, you cannot just do a regular upgrade, it
- would install dns/ldns overwriting existing files and removing them when
- removing the old version of dns/py-ldns.
-
- # pkg_delete -f py-ldns-\*
- # cd /usr/ports/dns/py-ldns && make clean && make install clean
- or
- # pkg delete -fg py-ldns-\*
- # pkg install -f dns/py-ldns
-
-20130707:
- AFFECTS: users of www/ajaxplorer
- AUTHOR: madpilot@FreeBSD.org
-
- Ajaxplorer was updated to 5.0.1. This is a major update and some
- manual intervention may be needed.
-
- Before upgrading you should preserve the following files in WWWDIR
- (defaults to PREFIX/www/ajaxplorer) if you have customized them:
-
- conf/bootstrap_conf.php
- conf/bootstrap_context.php
- conf/bootstrap_plugins.php
- conf/bootstrap_repositories.php
-
- and put them back after the upgrade.
-
- If you are using a database backend you will need to manually
- update your database table using the sql script the port will
- install at WWWDIR/conf/conf/4.2.3-5.0.0-db-upgrade.sql
-
- Don't forget to check the documentation about upgrading from
- version 4.x at:
- http://ajaxplorer.info/ajaxplorer-5-0-0:/#Upgrade_from_4X_to_500
-
-20130706:
- AFFECTS: users of devel/apr1
- AUTHOR: ohauer@FreeBSD.org
-
- APR was updated to 1.4.8 and APR-util was updated to 1.5.2.
-
- Please rebuild all ports which are using functions from APR/APR-util
- such as Apache, Subversion, etc.
-
- # portmaster -r apr
- or
- # portupgrade -r devel/apr1
- or
- # pkg install -fR devel/apr1
-
-20130705:
- AFFECTS: users of x11/kdelibs4
- AUTHOR: kde@FreeBSD.org
-
- The KDE Software Compilation 4.10.4 was committed a few days ago, and
- version 4.10.5 was committed today.
-
- They include better support for using clang as the compiler, but that
- requires recompiling all KDE ports which depend on x11/kdelibs4. Most
- ports which fall into this category are already part of the KDE Software
- Compilation and have been updated to version 4.10.5, but those released
- separately need to be rebuilt manually.
-
- If you are building your KDE ports with clang, doing the following is
- recommended:
-
- # portmaster -r kdelibs-4\*
- or
- # portupgrade -fr x11/kdelibs4
- or
- # pkg install -fR x11/kdelibs4
-
- Alternatively, to avoid rebuilding the ports which are part of the 4.10.5
- update:
-
- # portmaster -x \*-4.10.5\* -r kdelibs-4\*
- or
- # portupgrade -x \*-4.10.5\* -fr x11/kdelibs4
-
-20130703:
- AFFECTS: users of comms/trustedqsl and comms/tqsllib
- AUTHOR: db@FreeBSD.org
-
- Upstream have removed the need for a separate port for the library
- formerly found in comms/tqsllib. Please remove tqsllib before installing
- trustedqsl
-
-20130627:
- AFFECTS: users of ports-mgmt/portmaster
- AUTHOR: bdrewery@FreeBSD.org
-
- Since June 22nd, portmaster no longer relies on 'WITH_PKGNG' to be defined,
- or ports to be checked out to enable pkgng support.
-
- It now considers whether or not pkg is installed and registered with itself.
-
- I.e., if this returns data, pkgng is considered in use:
-
- # pkg info pkg
-
- It's possible that you may have tested pkgng in the past, ran pkg2ng, and
- never fully committed to it by setting WITH_PKGNG. If this is the case,
- uninstall pkg with pkg_info/pkg_delete and also remove the stale database,
- rm /var/db/pkg/local.sqlite.
-
- This could manifest itself as portmaster -L showing the wrong versions, or
- portmaster no longer detecting installed packages correctly.
-
- Note that PORTS still require WITH_PKGNG=yes in make.conf if you are not
- running CURRENT.
-
-20130627:
- AFFECTS: users of net/samba36
- AUTHOR: timur@FreeBSD.org
-
- Samba has updated format of it's printing tdbs (ntprinting.tdb, ntforms.tdb,
- ntdrivers.tdb) to include character encoding. When updating from Samba 3.5
- or earlier to Samba 3.6 or 4.0 these tdbs need to be migrated to new registry
- based printing management. This implies also character conversion.
-
- You have to specify the correct code page for the conversion, see iconv -l.
- The mostly used one is Windows Latin1 which is CP1252.
-
- You can correctly view the tdb with:
-
- # net printing dump encoding=CP1252 /path/to/ntprinters.tdb
-
- or migrate it with e.g.:
-
- # net printing migrate encoding=CP1252 /path/to/ntprinters.tdb
-
- If you migrate printers it is suggest to do it in the following order:
-
- ntforms.tdb
- ntdrivers.tdb
- ntprinting.tdb
-
- Don't forget to rename, move or delete these files in /var/db/samba after
- the migration.
-
-20130623:
- AFFECTS: users of net-im/mikutter003
- AUTHOR: tota@FreeBSD.org
-
- net-im/mikutter003 has been removed from the ports tree because the
- Twitter API version 1.0 was deprecated on 2013-05-07 and mikutter003,
- which uses the API 1.0, won't work.
- Please consider using net-im/mikutter instead of this.
-
- 1. deinstall mikutter003
- 2. upgrade Ruby to 1.9( or later) (see the entry 20130527)
- 3. install net-im/mikutter
-
-20130623:
- AFFECTS: users of www/magento
- AUTHOR: melvyn@magemana.nl
-
- Magento has been updated to 1.7.0.2 on 2013-06-03. With it a stricter file
- system policy is enforced on the port. If you (or your customer) rely heavily
- on Magento Connect via the backend to install extensions, your quickfix is:
-
- # chown -R www: ${PREFIX}/www/magento
- # chmod -R u+w ${PREFIX}/www/magento
-
- The more conservative approach:
- # chown -R www: ${PREFIX}/www/magento/app/code/{local,community} \
- ${PREFIX}/www/magento/app/{design,locale} \
- ${PREFIX}/www/magento/{downloader,skin}
-
- # chmod -R u+w ${PREFIX}/www/magento/app/code/{local,community} \
- ${PREFIX}/www/magento/app/{design,locale} \
- ${PREFIX}/www/magento/{downloader,skin}
-
- The conservative approach will alert you to extensions that try to write in
- Magento core, while allowing clean extensions to install properly (corner
- cases may exist).
-
-20130619:
- AFFECTS: users of devel/subversion
- AUTHOR: ohauer@FreeBSD.org
-
- devel/subversion has been upgraded from 1.7.10 to 1.8.0
-
- If you want to upgrade, and use http/https access to repositories,
- please check, that the SERF option is enabled, as NEON support
- is gone. Also, mod_dontdothat and svnauthz_validate are
- now enabled with one option TOOLS, among other new tools
- and SVNMUCC is enabled always.
-
- subversion-1.7.x is available as devel/subversion17
-
- To stay on subversion-1.7.x set in /etc/make.conf
- WITH_SUBVERSION_VER=17
- and use the following command
-
- # pkg set -o devel/subversion:devel/subversion17
- or
- # portmaster -o devel/subversion17 devel/subversion
-
-20130614:
- AFFECTS: users who set port options in make.conf
- AUTHOR: tijl@FreeBSD.org
-
- Configuring options in make.conf using variables like OPTIONS_SET and
- OPTIONS_UNSET now also suppresses the option dialog for those options.
- This means that when building a port the option dialog will only appear if
- there are truly new options that have not been configured before using either
- the dialog or make.conf. This allows you to set options like DOCS, NLS,
- X11, etc. once for all ports and not have option dialogs pop up if those are
- the only options. For a list of variables you can set in make.conf to
- control options see Mk/bsd.options.mk.
-
-20130612:
- AFFECTS: users of lang/perl* and any port that depends on it
- AUTHOR: az@FreeBSD.org
-
- lang/perl5.12 has been upgraded from version 5.12.4 to 5.12.5
- lang/perl5.14 has been upgraded from version 5.14.2 to 5.14.4
- lang/perl5.16 has been upgraded from version 5.16.2 to 5.16.3
-
- The directory structure where Perl is installed has also been modified:
- "major.minor" is now used instead of "major.minor.patchlevel".
-
- The "perl-after-upgrade" script has been removed.
-
- Please rebuild all Perl ports and all ports that depend on it:
-
- # portmaster -r perl
- or
- # portupgrade -rf perl
- or
- # pkg install -fR perl
-
-20130609:
- AFFECTS: users of audio/flac and any port that depends on it
- AUTHOR: naddy@FreeBSD.org
-
- FLAC has been updated to 1.3.0 and the shared library versions
- have been bumped. Please rebuild all ports that depend on it:
-
- # portmaster -r flac
- or
- # portupgrade -fr audio/flac
- or
- # pkg install -fR audio/flac
-
-20130607:
- AFFECTS: Nobody
- AUTHOR: wxs@FreeBSD.org
-
- FreeBSD 8.4 released.
-
-20130604:
- AFFECTS: users of lang/ghc and */hs-*
- AUTHOR: haskell@FreeBSD.org
-
- The Glorious Glasgow Haskell Compiler has been updated to version
- 7.6.3 and Haskell Platform to 2013.2.0.0. Hence it is recommended to
- rebuild or reinstall all the dependent ports by one of the following
- commands:
-
- # portmaster -w -r ghc
- or
- # portupgrade -fr lang/ghc
- or
- # pkg install -fR lang/ghc
-
- Note that prefixes used for hs- ports (Cabal packages) have been
- changed to PREFIX/{lib,share,share/doc}/cabal/ghc-GHC_VERSION to
- enable more seamless upgrades in the future.
-
-20130603:
- AFFECTS: users of dns/opendnssec
- AUTHOR: wg@FreeBSD.org
-
- Some database changes have been made between version 1.3 and 1.4,
- upgrading needs to be done manually by running the following scripts:
-
- For MySQL users:
- PREFIX/share/opendnssec/migrate_adapters_1.mysql
-
- For SQLite users:
- PREFIX/share/opendnssec/migrate_adapters_1.sqlite3
-
- For the full migration explanation see:
- PREFIX/share/doc/opendnssec/MIGRATION
-
- opendnssec 1.3 version was preserved as dns/opendnssec13 port.
-
-20130601:
- AFFECTS: users of textproc/ack
- AUTHOR: rakuco@FreeBSD.org
-
- ack has been updated to version 2.04. It is slightly incompatible with some
- options present in ack1. For more information, see
- http://beyondgrep.com/ack-2.0.
-
-20130530:
- AFFECTS: users of irc/inspircd
- AUTHOR: swills@FreeBSD.org
-
- The irc/inspircd port has been updated to 2.0.12. Some of the config option
- names in the rc script have been changed. Check the script for more detail.
-
-20130527:
- AFFECTS: users of lang/ruby18
- AUTHOR: swills@FreeBSD.org
-
- The default ruby version has been updated from 1.8 to 1.9. First, stop any
- software that uses ruby. Then, you'll need to rebuild all ports that depend
- on ruby:
-
- If you use portmaster:
- # portmaster -o lang/ruby19 lang/ruby18
- # portmaster -R -r ruby-1.9
-
- If you use portupgrade:
- # portupgrade -f lang/ruby18
- # portupgrade -f lang/ruby19 # if you have it installed
- # portupgrade -f ports-mgmt/portupgrade
- # portupgrade -x ruby-1.8.\* -fr lang/ruby18
-
- After these steps are complete, you can pkg_delete ruby 1.8 if you
- no longer need it.
-
- If you use pkgng:
- # pkg set -o lang/ruby18:lang/ruby19
- # pkg install -fR lang/ruby19
-
- If you wish to keep the 1.8 version as default, add the following lines
- to your /etc/make.conf file:
-
- #
- # Keep ruby 1.8 as default version.
- #
- RUBY_DEFAULT_VER=1.8
-
-20130525:
- AFFECTS: users of sysutils/rsyslog5*
- AUTHOR: brd@FreeBSD.org
-
- Rsyslog 5.x has reached end of life status and has therefore been removed.
- While sysutils/rsyslog6* exists, please consider migrating to
- sysutils/rsyslog7 as that is the currently supported release.
-
-20130525:
- AFFECTS: users of mail/postgrey
- AUTHOR: Darren Pilgrim <ports.maintainer@evilphi.com>
-
- The RC script for postgrey has been modified. If you use the
- default value for postgrey_flags this does not affect you.
-
- If you have postgrey listening on a Unix socket or set any optional
- values, please read the comments in the RC scripts and check your
- settings in rc.conf prior to restarting postgrey.
-
*** 2529 LINES SKIPPED ***