git: e7bc1f3c95 - main - Status/2026Q3/bananapi-r64-r2-r2pro-drivers.adoc: Add report

The branch main has been updated by salvadore:

URL: https://cgit.FreeBSD.org/doc/commit/?id=e7bc1f3c952d9688d717fe058f96774873b42cb3

commit e7bc1f3c952d9688d717fe058f96774873b42cb3
Author:     Martin Filla <freebsd@sysctl.cz>
AuthorDate: 2026-09-16 11:41:17 +0000
Commit:     Lorenzo Salvadore <salvadore@FreeBSD.org>
CommitDate: 2026-10-21 14:38:10 +0000

    Status/2026Q3/bananapi-r64-r2-r2pro-drivers.adoc: Add report
    
    Pull Request:   https://github.com/freebsd/freebsd-doc/pull/709
---
 .../bananapi-r64-r2-drivers.adoc                   | 126 +++++++++++++++++++++
 1 file changed, 126 insertions(+)

diff --git a/website/content/en/status/report-2026-07-2026-09/bananapi-r64-r2-drivers.adoc b/website/content/en/status/report-2026-07-2026-09/bananapi-r64-r2-drivers.adoc
new file mode 100644
index 0000000000..a570970bff
--- /dev/null
+++ b/website/content/en/status/report-2026-07-2026-09/bananapi-r64-r2-drivers.adoc
@@ -0,0 +1,126 @@
+=== FreeBSD Driver Development for BananaPi R2 / R64 / R2 Pro
+
+Links: +
+link:https://wiki.freebsd.org/arm/Bananapi[Banana Pi on the FreeBSD Wiki] URL: link:https://wiki.freebsd.org/arm/Bananapi[]
+
+Contact: Martin Filla <freebsd@sysctl.cz>
+
+This project adds FreeBSD support for three Banana Pi router boards: the
+BPI-R2 (MediaTek MT7623, armv7), the BPI-R64 (MediaTek MT7622, arm64) and
+the BPI-R2 Pro (Rockchip RK3568, arm64).
+
+==== BPI-R2 (MT7623) Introduction
+
+The Banana Pi BPI-R2 is a MediaTek MT7623N-based router board (quad-core
+ARM Cortex-A7, up to 1.3 GHz) with 2 GB DDR3, 8 GB eMMC, 4x Gigabit LAN and
+1x Gigabit WAN driven by the built-in MT7530 switch, two SATA ports, two
+USB 3.0 ports, a mini PCIe slot, HDMI output, MIPI DSI/CSI connectors and
+the usual UART, I2C, SPI, PWM and GPIO headers.  Because the MT7623 is an
+armv7 part, it is the only board of the three that is built from the
+32-bit `GENERIC` kernel configuration.
+
+==== Current State of FreeBSD Support BPI-R2
+
+Implemented so far:
+
+* Platform / machdep support -- device map, early console, late init and
+  SoC reset, plus the `SOC_MEDIATEK` kernel option and a DTB build for
+  `mt7623n-bananapi-bpi-r2.dts`
+* SMP startup for the four Cortex-A7 cores
+* UART driver
+* Clock management -- shared MediaTek clock infrastructure (gates, muxes,
+  fixed factors) used by the topckgen, infracfg, pericfg, hifsys, bdpsys,
+  imgsys, vdecsys and audsys clock controllers
+* PLL clocks (apmixedsys)
+* System configuration registers (syscfg/syscon)
+* Pinctrl
+* GPIO
+
+==== Development roadmap BPI-R2
+
+Implement missing drivers:
+
+* Storage controller (eMMC/SD/MMC)
+* Ethernet (GMAC) and the MT7530 switch
+* USB 3.0 (xHCI) and T-PHY
+* SATA / AHCI
+* PCIe
+* Watchdog
+* I2C
+* SPI
+* PWM
+
+==== BPI-R64 Introduction
+
+The Banana Pi BPI-R64 is a MediaTek MT7622-based development board
+(dual-core ARM Cortex-A53, ~1.35 GHz) featuring 4x Gigabit LAN, 1x Gigabit
+WAN, 802.11n 4x4 Wi-Fi, Bluetooth 5.0 and a range of peripheral interfaces
+(UART, SPI, I2C, GPIO, SATA, mini PCIe, eMMC and others).
+
+==== Current State of FreeBSD Support BPI-R64
+
+Implemented so far:
+
+* UART driver
+* Clock management (clocks)
+* Pinctrl
+* Storage controller (eMMC/SD/MMC)
+* Ethernet driver for the MT7622 GMAC
+* USB 3.0 (xHCI) driver
+* T-PHY (USB and PCIe PHY)
+* Watchdog driver
+* RTC driver
+* Random number generator driver
+* PCIe configuration space driver (pciecfg)
+* sysirq -- the interrupt polarity controller
+* PCIe -- experimental
+* Wi-Fi -- experimental
+
+==== Development roadmap BPI-R64
+
+Implement missing drivers:
+
+* SATA / AHCI, including SATA mode for the T-PHY
+* GPIO
+* I2C
+* SPI
+* PWM
+
+Work in progress:
+
+* Review and rework of the clock drivers
+* MT7531 Ethernet switch
+
+==== BPI-R2 Pro Introduction
+
+The Banana Pi BPI-R2 Pro is the next generation smart router development
+board, powered by a Rockchip RK3568 processor.  It carries 2 GB LPDDR4
+memory and 16 GB eMMC storage, and offers two USB 3.0 ports, five Gigabit
+Ethernet ports, an M.2 Key-E and a mini PCIe slot, two MIPI DSI interfaces
+(one of which can be switched to LVDS in software), one MIPI CSI camera
+interface and one HDMI output.
+
+==== Current State of FreeBSD Support BPI-R2 Pro
+
+Implemented so far:
+
+* UART driver
+* Clock management (clocks)
+* Pinctrl
+* GPIO
+* Storage controller (eMMC/SD/MMC)
+* USB 3.0 (xHCI) driver
+* Watchdog driver
+* PCIe driver
+
+==== Development roadmap BPI-R2 Pro
+
+Implement missing drivers:
+
+* HDMI
+* MIPI DSI/CSI
+
+Work in progress:
+
+* AHCI / SATA
+* PCIe