FreeBSD-main-amd64-test - Build #29887 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #29888 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #29886 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Fri, 06 Nov 2026 11:56:30 UTC
FreeBSD-main-amd64-test - Build #29887 (66d078c17294ca2ea225e4926a8cd9697dda57ed) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/29887/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/29887/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/29887/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

5ed9f98d7536bc020e52b7da16d7685b470541ac by phk:
mrsas(4): Add missing Xr to mrsasutil(8)

1e1ce1f6f97b5269c69490814936edecb5c80959 by aokblast:
libthr: Fix whitespace in thr_once.c

71937d8e11a6b7fdb3c1b308d5f7c8b30dac5ca7 by aokblast:
libthr: Predict libthr is initialized in _thr_check_init

2734bbbcba3cd6ff2bf4382fb6e85b884beb966e by aokblast:
libthr: Create landing pad in thr_once in C++ exception

4b732459f030a568a93dbe31230c5a17caa035e5 by gallatin:
iflib: Use a single tx dma map

843cb77850d991c349fd384fee6402b6af5d7f74 by rcm:
e6000sw: Write the value, not the register, in Clause 45 writes

bfe4be85a9354b92135e105028f2e1b3e0307ada by olivier:
tpm_crb: wait for idle and locality release after each command

3ac9299ee90cc7a6330c560d8c49d5151185f80e by kfv:
libc: Export timespec_getres(3) and add tests

878084c774c6d68fcdb65e00ba8f74726dda0999 by des:
nfsserver: Do not increment seqid on BADSEQID

12f90bbd3029fedea93e9bb0b1f02c3afafe237b by kevans:
virtio_random: defer first enqueue until after DRIVER_OK

cf59649539e653db8285996af2b161be9693a49d by rmacklem:
xdr_mbuf.c: Add a check for the return value for xdrmbuf_getbytes()

b22b999afc2d1ecb320928c03f2d8e0f6ae1c1fe by sjg:
libsecureboot restore default trust anchors

66d078c17294ca2ea225e4926a8cd9697dda57ed by christos:
netlink: Pre-register the missing devctl event systems



The end of the build log:

[...truncated 6.18 MiB...]
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.481s]
sys/netpfil/pf/ether:tag  ->  epair0a: Ethernet address: f2:e1:a2:36:18:11
epair0b: Ethernet address: 72:18:ec:b0:09:f3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [11.440s]
sys/netpfil/pf/forward:v4  ->  epair0a: Ethernet address: 1a:d1:cf:9b:d9:92
epair0b: Ethernet address: 8a:db:b7:f8:9a:71
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: f6:65:1a:6a:97:47
epair1b: Ethernet address: 52:d0:96:ae:77:a9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [13.189s]
sys/netpfil/pf/forward:v6  ->  epair0a: Ethernet address: 8e:28:0c:31:58:8f
epair0b: Ethernet address: ce:0b:d4:a3:19:a7
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 7e:63:4d:c2:4e:fc
epair1b: Ethernet address: b6:7b:25:86:96:c5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
broken: Test case execenv cleanup timed out  [17.846s]
sys/netpfil/pf/forward:v6_hlim  ->  epair0a: Ethernet address: b6:df:c2:1b:99:4c
epair0b: Ethernet address: 6e:a9:60:be:1b:10
epair1a: Ethernet address: ee:f4:b3:c3:7b:1e
epair1b: Ethernet address: a2:ae:dc:7b:c5:f8
broken: Test case body timed out  [300.013s]
sys/netpfil/pf/frag4.py:TestFrag4_NoReassemble::test_udp_frag  ->  panic: deadlres_td_sleep_q: possible deadlock detected for 0xfffff8010241a780 (swi6: task queue), blocked for 180274 ticks

cpuid = 0
time = 1793966189
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x36/frame 0xfffffe008bdded20
vpanic() at vpanic+0x149/frame 0xfffffe008bddee50
panic() at panic+0x43/frame 0xfffffe008bddeeb0
deadlkres() at deadlkres+0x32a/frame 0xfffffe008bddeef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008bddef30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008bddef30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 100079 ]
Stopped at      kdb_enter+0x33: movq    $0,0x1160032(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0x9b3380
curthread    = 0xfffff80102452000: pid 0 tid 100079 critnest 1 "deadlkres"
curpcb       = 0xfffff80102452550
fpcurthread  = none
idlethread   = 0xfffff8010240b780: tid 100003 "idle: cpu0"
self         = 0xffffffff82610000
curpmap      = 0xffffffff81da8d00
tssp         = 0xffffffff82610384
rsp0         = 0xfffffe008bddf000
kcr3         = 0x8000000002551002
ucr3         = 0xffffffffffffffff
scr3         = 0x5da1df85
gs32p        = 0xffffffff82610404
ldt          = 0xffffffff82610444
tss          = 0xffffffff82610434
curvnet      = 0
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 2h9m59s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-29887' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./run.sh
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./run-kyua.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins4981402768785273200.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '66d078c17294ca2ea225e4926a8cd9697dda57ed', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../66d078c17294ca2ea225e4926a8cd9697dda57ed/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address