FreeBSD-main-amd64-test - Build #28456 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #28457 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #28455 - Still unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Sat, 09 May 2026 14:05:20 UTC
FreeBSD-main-amd64-test - Build #28456 (555ffd9022de0c497881bafc413e3e1d05af10d4) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28456/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28456/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28456/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

44338ccd12685621c4b1c57e692a4f27f5a655d3 by des:
BSD.root.dist: Correct tag for /etc/sysctl.kld.d

555ffd9022de0c497881bafc413e3e1d05af10d4 by aokblast:
pci: use uint32_t for eecp



The end of the build log:

[...truncated 4.42 MiB...]
epair1b: Ethernet address: ea:7c:f3:58:21:5d
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: ce:07:42:90:6c:e3
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0b: link state changed to DOWN
epair0b.1: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b.1: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [1.326s]
sys/net/if_bridge_test:vlan_defuntagged  ->  bridge0: Ethernet address: 92:5d:e6:54:12:8b
epair0a: Ethernet address: 5a:43:90:99:54:48
epair0b: Ethernet address: f2:df:8a:a1:4f:e3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
bridge0: link state changed to UP
epair0a: promiscuous mode disabled
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.183s]
sys/net/if_bridge_test:vlan_filtering  ->  epair0a: Ethernet address: ce:3e:71:54:55:1d
epair0b: Ethernet address: fa:63:17:84:5a:e3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 0e:3a:a6:cf:09:8c
epair1b: Ethernet address: 0e:d0:89:08:c9:c0
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: f2:04:05:48:07:db
epair0a: promiscuous mode enabled
bridge0: link state changed to UP
epair1a: promiscuous mode enabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b.20: link state changed to DOWN
epair1b: link state changed to DOWN
epair1b.20: link state changed to DOWN
epair1a: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [8.442s]
sys/net/if_bridge_test:vlan_ifconfig_iftagged  ->  epair0a: Ethernet address: de:de:88:dd:3f:f5
epair0b: Ethernet address: d2:3e:1f:fe:5c:b9
epair0a: link state changed to UP
epair0b: link state changed to UP
bridge0: Ethernet address: ae:fb:7c:61:34:4a
epair0a: promiscuous mode enabled
bridge0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [0.277s]
sys/net/if_bridge_test:vlan_pvid  ->  epair0a: Ethernet address: 2a:83:1b:6d:4b:f3
epair0b: Ethernet address: ae:f3:b8:da:75:f3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:03:c1:1b:82:94
epair1b: Ethernet address: 42:5c:5d:c8:a1:ec
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: e2:f8:04:00:79:7f
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [4.290s]
sys/net/if_bridge_test:vlan_pvid_1q  ->  epair0a: Ethernet address: 32:eb:a0:e9:a7:44
epair0b: Ethernet address: 96:57:22:b0:d2:08
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ea:f1:db:8f:30:b1
epair1b: Ethernet address: ae:42:b0:ea:d4:93
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: 96:4e:89:2a:20:16
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b.20: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [2.292s]
sys/net/if_bridge_test:vlan_pvid_filtered  ->  epair0a: Ethernet address: 2a:e9:6a:93:1f:2e
epair0b: Ethernet address: 0e:4b:ad:a0:e6:33
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet addressFATAL: command execution failed
java.nio.channels.ClosedChannelException
	at org.jenkinsci.remoting.protocol.NetworkLayer.onRecvClosed(NetworkLayer.java:155)
	at org.jenkinsci.remoting.protocol.impl.NIONetworkLayer.ready(NIONetworkLayer.java:196)
	at org.jenkinsci.remoting.protocol.IOHub$OnReady.run(IOHub.java:808)
	at jenkins.util.ContextResettingExecutorService.lambda$wrap$0(ContextResettingExecutorService.java:26)
	at jenkins.security.ImpersonatingExecutorService.lambda$wrap$0(ImpersonatingExecutorService.java:66)
	at jenkins.util.ErrorLoggingExecutorService.lambda$wrap$0(ErrorLoggingExecutorService.java:51)
	at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1090)
	at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:614)
	at java.base/java.lang.Thread.run(Thread.java:1474)
Caused: java.io.IOException: Backing channel 'JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63208' is disconnected.
	at hudson.remoting.RemoteInvocationHandler.channelOrFail(RemoteInvocationHandler.java:227)
	at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:306)
	at jdk.proxy2/jdk.proxy2.$Proxy72.isAlive(Unknown Source)
	at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1227)
	at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1219)
	at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:195)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:145)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92)
	at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
	at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:817)
	at hudson.model.Build$BuildExecution.build(Build.java:199)
	at hudson.model.Build$BuildExecution.doRun(Build.java:164)
	at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:526)
	at hudson.model.Run.execute(Run.java:1842)
	at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
	at hudson.model.ResourceController.execute(ResourceController.java:97)
	at hudson.model.Executor.run(Executor.java:456)
FATAL: Unable to delete script file /tmp/jenkins10780325981259269756.sh
java.nio.channels.ClosedChannelException
	at org.jenkinsci.remoting.protocol.NetworkLayer.onRecvClosed(NetworkLayer.java:155)
	at org.jenkinsci.remoting.protocol.impl.NIONetworkLayer.ready(NIONetworkLayer.java:196)
	at org.jenkinsci.remoting.protocol.IOHub$OnReady.run(IOHub.java:808)
	at jenkins.util.ContextResettingExecutorService.lambda$wrap$0(ContextResettingExecutorService.java:26)
	at jenkins.security.ImpersonatingExecutorService.lambda$wrap$0(ImpersonatingExecutorService.java:66)
	at jenkins.util.ErrorLoggingExecutorService.lambda$wrap$0(ErrorLoggingExecutorService.java:51)
	at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1090)
	at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:614)
	at java.base/java.lang.Thread.run(Thread.java:1474)
Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@654fe7bb:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63208": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63208 failed. The channel is closing down or has closed down
	at hudson.remoting.Channel.call(Channel.java:1101)
	at hudson.FilePath.act(FilePath.java:1217)
	at hudson.FilePath.act(FilePath.java:1206)
	at hudson.FilePath.delete(FilePath.java:1753)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:163)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92)
	at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
	at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:817)
	at hudson.model.Build$BuildExecution.build(Build.java:199)
	at hudson.model.Build$BuildExecution.doRun(Build.java:164)
	at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:526)
	at hudson.model.Run.execute(Run.java:1842)
	at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
	at hudson.model.ResourceController.execute(ResourceController.java:97)
	at hudson.model.Executor.run(Executor.java:456)
Build step 'Execute shell' marked build as failure
FATAL: Channel "hudson.remoting.Channel@654fe7bb:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63208": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63208 failed. The channel is closing down or has closed down
java.nio.channels.ClosedChannelException
	at org.jenkinsci.remoting.protocol.NetworkLayer.onRecvClosed(NetworkLayer.java:155)
	at org.jenkinsci.remoting.protocol.impl.NIONetworkLayer.ready(NIONetworkLayer.java:196)
	at org.jenkinsci.remoting.protocol.IOHub$OnReady.run(IOHub.java:808)
	at jenkins.util.ContextResettingExecutorService.lambda$wrap$0(ContextResettingExecutorService.java:26)
	at jenkins.security.ImpersonatingExecutorService.lambda$wrap$0(ImpersonatingExecutorService.java:66)
	at jenkins.util.ErrorLoggingExecutorService.lambda$wrap$0(ErrorLoggingExecutorService.java:51)
	at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1090)
	at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:614)
	at java.base/java.lang.Thread.run(Thread.java:1474)
Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@654fe7bb:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63208": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63208 failed. The channel is closing down or has closed down
	at hudson.remoting.Channel.call(Channel.java:1101)
	at hudson.Launcher$RemoteLauncher.kill(Launcher.java:1162)
	at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:538)
	at hudson.model.Run.execute(Run.java:1842)
	at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
	at hudson.model.ResourceController.execute(ResourceController.java:97)
	at hudson.model.Executor.run(Executor.java:456)
: de:29:6f:a9:0b:f4
epair1b: Ethernet address: 16:59:3c:64:1e:d3
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: 0e:55:00:d8:64:0f
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [2.290s]
sys/net/if_bridge_test:vlan_pvid_tagged  ->  epair0a: Ethernet address: 0a:6a:9b:e5:e1:54
epair0b: Ethernet address: 2a:c2:62:3d:df:45
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 86:f1:b0:6d:79:12
epair1b: Ethernet address: 02:35:2e:e0:60:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: b2:8e:a8:69:8d:a4
epair0a: promiscuous mode enabled
bridge0: link state changed to UP
epair1a: promiscuous mode enabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b.20: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b.20: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [2.322s]
sys/net/if_bridge_test:vlan_qinq  ->  epair0a: Ethernet address: 92:2e:a7:9b:09:b5
epair0b: Ethernet address: 02:8b:e8:b0:98:28
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9e:b6:c8:93:69:19
epair1b: Ethernet address: 8e:d5:b2:44:4f:02
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: 9e:a9:94:e1:ee:cd
epair0a: promiscuous mode enabled
bridge0: link state changed to UP
epair1a: promiscuous mode enabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b.5: link state changed to DOWN
epair0b.5.10: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b.5: link state changed to DOWN
epair1b.5.10: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [6.391s]
sys/net/if_bridge_test:vlan_svi  ->  epair0a: Ethernet address: 6a:f0:30:f9:64:7c
epair0b: Ethernet address: e6:d0:45:8c:f3:43
epair0a: link state changed to UP
epair0b: link state changed to UP
bridge0: Ethernet address: f2:04:24:e1:2f:50
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
lock order reversal:
 1st 0xffffffff822e81a8 vlan_sx (vlan_sx, sx) @ /usr/src/sys/net/if_vlan.c:2260
 2nd 0xfffff8007[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] Build does not have any of the results [SUCCESS]. Did not execute build step #0.
ERROR: Step ‘Publish JUnit test result report’ failed: no workspace for FreeBSD-main-amd64-test #28456
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address