FreeBSD-main-amd64-test - Build #28037 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #28038 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #28036 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Sat, 14 Mar 2026 17:49:29 UTC
FreeBSD-main-amd64-test - Build #28037 (f91464171d615b7e7720ac9ed67e2e86392d1b41) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28037/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28037/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28037/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

f91464171d615b7e7720ac9ed67e2e86392d1b41 by pouria:
acpi_system76: Improve sysctl names



The end of the build log:

[...truncated 9.50 KiB...]
+ expect -c $'set timeout 21540; \t\tspawn sudo /usr/bin/timeout -k 60 21420 /usr/sbin/bhyve \t\t-c 2 -m 8192m -A -H -P \t\t-s 0:0,hostbridge \t\t-s 1:0,lpc \t\t-s 2:0,virtio-blk,disk-test.img \t\t-s 3:0,virtio-blk,meta.tar \t\t -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1 -s 6:0,virtio-blk,disk2 -s 7:0,virtio-blk,disk3 -s 8:0,virtio-blk,disk4 -s 9:0,virtio-blk,disk5 \t\t-l com1,stdio \t\ttestvm-main-amd64-28037; \t\texpect { eof }'
spawn sudo /usr/bin/timeout -k 60 21420 /usr/sbin/bhyve -c 2 -m 8192m -A -H -P -s 0:0,hostbridge -s 1:0,lpc -s 2:0,virtio-blk,disk-test.img -s 3:0,virtio-blk,meta.tar -s 4:0,ahci-hd,disk-cam -s 5:0,virtio-blk,disk1 -s 6:0,virtio-blk,disk2 -s 7:0,virtio-blk,disk3 -s 8:0,virtio-blk,disk4 -s 9:0,virtio-blk,disk5 -l com1,stdio testvm-main-amd64-28037
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2026 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 16.0-CURRENT #0 f91464171d61: Sat Mar 14 10:43:31 UTC 2026
    root@FreeBSD-main-amd64-build.jail.ci.FreeBSD.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
WARNING: WITNESS option enabled, expect reduced performance.
SRAT: Ignoring memory at addr 0xff000000
VT: init without driver.
CPU: Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz (2100.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50657  Family=0x6  Model=0x55  Stepping=7
  Features=0x9f83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS,HTT,PBE>
  Features2=0xfede7a17<SSE3,PCLMULQDQ,DTES64,DS_CPL,SSSE3,SDBG,FMA,CX16,xTPR,PCID,DCA,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xd0170fb9<FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,SMAP,AVX512CD,AVX512BW,AVX512VL>
  Structured Extended Features3=0x400<MD_CLEAR>
  XSAVE Features=0x1<XSAVEOPT>
  TSC: P-state invariant
Hypervisor: Origin = "bhyve bhyve "
real memory  = 9663676416 (9216 MB)
avail memory = 8288829440 (7904 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BHYVE  BVAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
Security policy loaded: TrustedBSD MAC/BSD Extended (mac_bsdextended)
ioapic0 <Version 1.1> irqs 0-31
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
smbios0: <System Management BIOS> at iomem 0xf1000-0xf101e
smbios0: Entry point: v2.1 (32-bit), Version: 2.6, BCD Revision: 2.6
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <BHYVE BVXSDT >
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 16777216 Hz quality 950
Event timer "HPET" frequency 16777216 Hz quality 550
Event timer "HPET1" frequency 16777216 Hz quality 450
Event timer "HPET2" frequency 16777216 Hz quality 450
Event timer "HPET3" frequency 16777216 Hz quality 450
Event timer "HPET4" frequency 16777216 Hz quality 450
Event timer "HPET5" frequency 16777216 Hz quality 450
Event timer "HPET6" frequency 16777216 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
virtio_pci0: <VirtIO PCI (legacy) Block adapter> port 0x2000-0x207f mem 0xc0000000-0xc0001fff irq 16 at device 2.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci0
vtblk0: 9216MB (18874556 512 byte sectors)
virtio_pci1: <VirtIO PCI (legacy) Block adapter> port 0x2080-0x20ff mem 0xc0002000-0xc0003fff irq 17 at device 3.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci1
vtblk1: 512MB (1048576 512 byte sectors)
ahci0: <Intel ICH8 AHCI SATA controller> mem 0xc0004000-0xc0005fff irq 18 at device 4.0 on pci0
ahci0: AHCI v1.30 with 32 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
virtio_pci2: <VirtIO PCI (legacy) Block adapter> port 0x2100-0x217f mem 0xc0006000-0xc0007fff irq 19 at device 5.0 on pci0
vtblk2: <VirtIO Block Adapter> on virtio_pci2
vtblk2: 128MB (262144 512 byte sectors)
virtio_pci3: <VirtIO PCI (legacy) Block adapter> port 0x2180-0x21ff mem 0xc0008000-0xc0009fff irq 20 at device 6.0 on pci0
vtblk3: <VirtIO Block Adapter> on virtio_pci3
vtblk3: 128MB (262144 512 byte sectors)
virtio_pci4: <VirtIO PCI (legacy) Block adapter> port 0x2200-0x227f mem 0xc000a000-0xc000bfff irq 21 at device 7.0 on pci0
vtblk4: <VirtIO Block Adapter> on virtio_pci4
vtblk4: 128MB (262144 512 byte sectors)
virtio_pci5: <VirtIO PCI (legacy) Block adapter> port 0x2280-0x22ff mem 0xc000c000-0xc000dfff irq 22 at device 8.0 on pci0
vtblk5: <VirtIO Block Adapter> on virtio_pci5
vtblk5: 128MB (262144 512 byte sectors)
virtio_pci6: <VirtIO PCI (legacy) Block adapter> port 0x2300-0x237f mem 0xc000e000-0xc000ffff irq 23 at device 9.0 on pci0
vtblk6: <VirtIO Block Adapter> on virtio_pci6
vtblk6: 128MB (262144 512 byte sectors)
vmgenc0: <VM Generation Counter> on acpi0
random: registering fast source VM Generation ID
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
Unhandled ps2 mouse command 0xe1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 16.0.
psm0: model Generic PS/2 mouse, device ID 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 4 on acpi0
uart3: <16550 or compatible> port 0x2e8-0x2ef irq 3 on acpi0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0
Timecounter "TSC" frequency 2100031638 Hz quality 1000
Timecounters tick every 10.000 msec
usb_needs_explore_all: no devclass
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
WARNING: WITNESS option enabled, expect reduced performance.
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <BHYVE SATA DISK 001> ACS-2 ATA SATA 3.x device
ada0: Serial Number BHYVE-AC61-4EA8-6E92
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 128MB (262144 512 byte sectors)
Setting hostuuid: aa63e219-825c-47d3-aad5-5124be19d5c1.
Setting hostid: 0xcf9bd3d0.
Starting file system checks:
/dev/gpt/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/gpt/rootfs: clean, 1070888 free (0 frags, 133861 blocks, 0.0% fragmentation)
Mounting local filesystems:.
Loading kernel modules:  accf_data accf_dns accf_http accf_tls blake2 carp cfiscsi cryptodev dummymbuf dummynet fusefs if_bridge if_enc if_epair if_ovpn if_stf ipdivert ipfw ipfw_nat ipl ipsec mac_bsdextended mac_ipacl mac_portacl mqueuefs pf pflog pflow pfsync sctp snd_dummy tarfs tcpmd5
blaketwo0: <Blake2>
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
IP Filter: v5.1.2 initialized.  Default = pass all, Logging = enabled
Security policy loaded: TrustedBSD MAC/ipacl (mac_ipacl)
Security policy loaded: TrustedBSD MAC/portacl (mac_portacl)
pcm0: <Dummy Audio Device>
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up harvesting: PURE_VMGENID,PURE_RDSEED,RANDOMDEV,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/e2fsprogs /usr/local/lib/perl5/5.42/mach/CORE
32-bit compatibility ldconfig path: /usr/lib32
lo0: link state changed to UP
Starting Network: lo0 enc0.
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=0 metric 0 mtu 1536
	options=0
	groups: enc
	nd6 options=829<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL,STABLEADDR>
Starting devd.


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address	= 0x1a6f40a40c00
fault code		= supervisor write data, protection violation
instruction pointer	= 0x20:0xffffffff81127826
stack pointer	        = 0x28:0xfffffe008be29930
frame pointer	        = 0x28:0xfffffe008be29930
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 676 (sh)
rdi: 00001a6f40a40c00 rsi: fffff80002b96400 rdx: 0000000000000400
rcx: 0000000000000400  r8: fffff80002b96400  r9: 000000000000a218
rax: 0000000000000000 rbx: fffff80002b96400 rbp: fffffe008be29930
r10: 0000000000000400 r11: fffff80117b88cd0 r12: fffffe008be29de8
r13: 0000000000000400 r14: 0000000000000400 r15: fffffe008be29da8
trap number		= 12
panic: page fault
cpuid = 1
time = 1773489092
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008be29640
vpanic() at vpanic+0x136/frame 0xfffffe008be29770
panic() at panic+0x43/frame 0xfffffe008be297d0
trap_fatal() at trap_fatal+0x68/frame 0xfffffe008be297f0
trap_pfault() at trap_pfault+0x2ac/frame 0xfffffe008be29860
calltrap() at calltrap+0x8/frame 0xfffffe008be29860
--- trap 0xc, rip = 0xffffffff81127826, rsp = 0xfffffe008be29930, rbp = 0xfffffe008be29930 ---
copyout_smap_erms() at copyout_smap_erms+0x196/frame 0xfffffe008be29930
uiomove_fromphys() at uiomove_fromphys+0x15f/frame 0xfffffe008be29990
vn_read_from_obj() at vn_read_from_obj+0x13f/frame 0xfffffe008be29a70
VOP_READ_PGCACHE_APV() at VOP_READ_PGCACHE_APV+0x2a/frame 0xfffffe008be29a90
vn_read() at vn_read+0x94/frame 0xfffffe008be29b10
vn_io_fault_doio() at vn_io_fault_doio+0x45/frame 0xfffffe008be29b70
vn_io_fault1() at vn_io_fault1+0x15e/frame 0xfffffe008be29cb0
vn_io_fault() at vn_io_fault+0x19d/frame 0xfffffe008be29d40
dofileread() at dofileread+0x80/frame 0xfffffe008be29d90
sys_read() at sys_read+0x127/frame 0xfffffe008be29e00
amd64_syscall() at amd64_syscall+0x169/frame 0xfffffe008be29f30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe008be29f30
--- syscall (3, FreeBSD ELF64, read), rip = 0x14fc1bfa132a, rsp = 0x14fc173b2488, rbp = 0x14fc173b24d0 ---
KDB: enter: panic
[ thread pid 676 tid 100112 ]
Stopped at      kdb_enter+0x33: movq    $0,0x15ecab2(%rip)
db> + rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-28037' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
x ./run.sh
x ./disable-zfs-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins15055218943709036642.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'f91464171d615b7e7720ac9ed67e2e86392d1b41', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../f91464171d615b7e7720ac9ed67e2e86392d1b41/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address