FreeBSD-stable-15-amd64-test - Build #434 - Failure
Date: Mon, 26 Jan 2026 10:16:26 UTC
FreeBSD-stable-15-amd64-test - Build #434 (e09f36c741bd4866c2fef36040eaf87d6f1c84bf) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/434/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/434/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/434/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
e09f36c741bd4866c2fef36040eaf87d6f1c84bf by zlei:
modules: iwlwifi/rtw89 allow standalone build
The end of the build log:
[...truncated 4.27 MiB...]
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [1.879s]
sys/netpfil/pf/fragmentation_pass:v6_route_to -> epair0a: Ethernet address: b2:7f:23:d6:28:33
epair0b: Ethernet address: 92:b6:33:f4:85:7b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2e:67:46:6b:97:b3
epair1b: Ethernet address: 22:38:fe:b3:ea:38
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [0.248s]
sys/netpfil/pf/get_state:many -> epair0a: Ethernet address: 6a:39:58:8b:ca:df
epair0b: Ethernet address: 66:cf:8b:46:e2:28
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
Limiting tcp reset response from 820 to 199 packets/sec
Limiting tcp reset response from 814 to 202 packets/sec
Limiting tcp reset response from 816 to 205 packets/sec
Limiting tcp reset response from 819 to 206 packets/sec
Limiting tcp reset response from 819 to 196 packets/sec
Limiting tcp reset response from 820 to 200 packets/sec
Limiting tcp reset response from 822 to 184 packets/sec
Limiting tcp reset response from 816 to 199 packets/sec
Limiting tcp reset response from 813 to 205 packets/sec
Limiting tcp reset response from 820 to 195 packets/sec
Limiting tcp reset response from 816 to 184 packets/sec
Limiting tcp reset response from 810 to 211 packets/sec
Limiting tcp reset response from 806 to 184 packets/sec
Limiting tcp reset response from 807 to 194 packets/sec
Limiting tcp reset response from 816 to 205 packets/sec
Limiting tcp reset response from 811 to 215 packets/sec
Limiting tcp reset response from 813 to 189 packets/sec
Limiting tcp reset response from 804 to 198 packets/sec
Limiting tcp reset response from 798 to 205 packets/sec
Limiting tcp reset response from 805 to 196 packets/sec
Limiting tcp reset response from 794 to 209 packets/sec
Limiting tcp reset response from 799 to 208 packets/sec
Limiting tcp reset response from 799 to 202 packets/sec
Limiting tcp reset response from 737 to 216 packets/sec
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [27.172s]
sys/netpfil/pf/header.py:TestHeader6::test_too_many -> skipped: kernel module 'ipfilter' loaded, skip test [0.504s]
sys/netpfil/pf/header.py:TestHeader::test_too_many -> epair0a: Ethernet address: 12:a5:06:ba:a9:f5
epair0b: Ethernet address: ea:98:db:89:97:b0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ce:8d:c2:15:8d:d5
epair1b: Ethernet address: fa:a6:24:57:70:04
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [11.889s]
sys/netpfil/pf/icmp:cve_2019_5598 -> epair0a: Ethernet address: a6:40:a8:f5:50:fa
epair0b: Ethernet address: 7a:21:54:fe:99:11
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ce:71:14:ea:fe:d5
epair1b: Ethernet address: 3e:a7:b1:db:6c:47
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed [4.932s]
sys/netpfil/pf/icmp:ttl_exceeded -> epair0a: Ethernet address: 46:5a:6f:03:be:5a
epair0b: Ethernet address: fa:59:3c:ce:7e:73
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1a:45:4a:2b:00:cf
epair1b: Ethernet address: 9e:84:1e:4a:7a:63
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 5a:49:bb:23:a9:98
epair2b: Ethernet address: ae:a0:94:e4:b6:93
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed [0.365s]
sys/netpfil/pf/icmp.py:TestICMP::test_fragmentation_needed -> epair0a: Ethernet address: 1e:c2:7e:12:6f:ec
epair0b: Ethernet address: 7e:4b:36:54:49:03
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: de:fb:19:ed:7a:46
epair1b: Ethernet address: ba:a7:4e:66:6e:0c
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0b: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0b: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [24.559s]
sys/netpfil/pf/icmp.py:TestICMP::test_inner_match -> epair0a: Ethernet address: 8e:08:95:50:8f:ff
epair0b: Ethernet address: aa:6c:b8:28:dc:13
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ee:70:ba:49:eb:f1
epair1b: Ethernet address: 6e:73:c0:ae:cb:3d
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
pf: BAD ICMP 3:0 outer dst: 192.0.2.2 -> 198.51.100.3 inner src: 198.51.100.2 -> 192.0.2.2
epair1b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [4.984s]
sys/netpfil/pf/icmp.py:TestICMP::test_truncated_opts -> epair0a: Ethernet address: 7e:ca:24:99:af:2c
epair0b: Ethernet address: d6:eb:22:d9:7c:0a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 82:28:f2:f6:15:cf
epair1b: Ethernet address: 1e:46:c5:2f:9f:2d
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair1a: promiscuous mode enabled
IP option too short
epair0b: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0b: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [5.965s]
sys/netpfil/pf/icmp.py:TestICMP_NAT::test_id_conflict -> epair0a: Ethernet address: 9a:c5:ee:7b:53:01
epair0b: Ethernet address: 2e:cd:76:2f:9b:30
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: be:f0:22:34:1e:9e
epair1b: Ethernet address: f6:4f:a6:fd:2e:72
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
pf_map_addr_sn: selected address 198.51.100.1
epair0a: promiscuous mode enabled
pf_map_addr_sn: selected address 198.51.100.1
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
pf_map_addr_sn: selected address 198.51.100.1
epair0a: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-434' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins14246166778855469968.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': 'e09f36c741bd4866c2fef36040eaf87d6f1c84bf', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../e09f36c741bd4866c2fef36040eaf87d6f1c84bf/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address