FreeBSD-main-amd64-test - Build #27732 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27733 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27731 - Failure"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Mon, 26 Jan 2026 01:03:25 UTC
FreeBSD-main-amd64-test - Build #27732 (4efe75af0869dd71a26685c432e5284d71bf4dc8) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27732/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27732/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27732/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

d6bc31f92991b6d67da54868f3563278015389ca by markj:
makefs/zfs/tests: Force-destroy md devices

4efe75af0869dd71a26685c432e5284d71bf4dc8 by markj:
kqueue.2: Fix reference to unexisting kevent1()



The end of the build log:

[...truncated 4.35 MiB...]
epair0b: Ethernet address: a2:c6:54:b4:c4:90
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6e:4e:61:48:bf:53
epair1b: Ethernet address: 86:fa:b4:9c:a5:80
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 5a:92:d2:88:68:98
epair2b: Ethernet address: fa:ba:c3:3f:a2:e8
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [3.507s]
sys/netpfil/pf/nat64.py:TestNAT64::test_udp_port_closed  ->  epair0a: Ethernet address: 5a:a7:0b:80:d5:55
epair0b: Ethernet address: 42:ac:65:95:55:e8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 56:7a:91:be:a7:df
epair1b: Ethernet address: fa:a8:ed:78:f3:13
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: fe:78:b6:8f:ac:d8
epair2b: Ethernet address: 22:85:9d:9e:b5:8c
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [3.512s]
sys/netpfil/pf/nat66.py:TestNAT66::test_npt_icmp  ->  epair0a: Ethernet address: 72:94:02:a9:ac:9c
epair0b: Ethernet address: 22:ba:6c:bc:03:8b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: da:96:94:0b:88:c4
epair1b: Ethernet address: b2:63:7f:60:7f:06
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [26.216s]
sys/netpfil/pf/nat66.py:TestNAT66::test_npt_route_to_icmp  ->  epair0a: Ethernet address: ce:0f:41:f9:bc:ca
epair0b: Ethernet address: aa:aa:99:e5:ff:e7
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 3e:8f:e1:d2:93:e9
epair1b: Ethernet address: 96:ba:53:83:bb:3a
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [26.150s]
sys/netpfil/pf/once:anchor  ->  epair0a: Ethernet address: 86:59:67:25:bd:3f
epair0b: Ethernet address: 06:20:63:f8:a5:70
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [15.463s]
sys/netpfil/pf/once:basic  ->  epair0a: Ethernet address: 26:2d:4f:a1:88:32
epair0b: Ethernet address: 7a:37:2f:54:49:a0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [28.690s]
sys/netpfil/pf/pass_block:any_if  ->  epair0a: Ethernet address: 92:ed:5b:26:24:3e
epair0b: Ethernet address: f6:d8:95:26:c1:d3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.236s]
sys/netpfil/pf/pass_block:enable_disable  ->  passed  [0.163s]
sys/netpfil/pf/pass_block:nested_inline  ->  epair0a: Ethernet address: 66:ba:9e:d9:fc:6b
epair0b: Ethernet address: 76:68:05:52:14:93
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.235s]
sys/netpfil/pf/pass_block:noalias  ->  epair0a: Ethernet address: da:df:c3:30:3b:f1
epair0b: Ethernet address: 16:e5:fe:a9:7c:b9
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [12.579s]
sys/netpfil/pf/pass_block:optimize_any  ->  epair0a: Ethernet address: 42:9d:c9:ee:84:87
epair0b: Ethernet address: 6e:07:b5:7f:0e:e6
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.244s]
sys/netpfil/pf/pass_block:received_on  ->  epair0a: Ethernet address: d2:23:e4:32:8d:78
epair0b: Ethernet address: 96:b2:52:00:22:81
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ce:e6:3e:45:2a:e8
epair1b: Ethernet address: 8e:ef:4f:b0:fa:ea
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: fe:71:92:c6:27:57
epair2b: Ethernet address: 6e:7c:5f:f6:b6:f4
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [56.165s]
sys/netpfil/pf/pass_block:urpf  ->  epair0a: Ethernet address: 16:32:5c:ba:52:b3
epair0b: Ethernet address: 9a:14:29:84:c5:13
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2a:80:9e:90:56:59
epair1b: Ethernet address: 42:b9:ff:20:50:f4
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [13.090s]
sys/netpfil/pf/pass_block:v4  ->  epair0a: Ethernet address: 4a:c6:5c:30:89:73
epair0b: Ethernet address: c6:ed:b2:0c:13:d8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.298s]
sys/netpfil/pf/pass_block:v6  ->  epair0a: Ethernet address: 72:95:0c:af:b5:b4
epair0b: Ethernet address: 4e:23:80:02:d2:98
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.450s]
sys/netpfil/pf/pflog:malformed  ->  epair0a: Ethernet address: ba:31:39:20:50:18
epair0b: Ethernet address: 22:85:0a:4a:22:2d
epair0a: link state changed to UP
epair0b: link state changed to UP
pflog0: promiscuous mode enabled
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27732' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./run.sh
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins3605785184647426153.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '4efe75af0869dd71a26685c432e5284d71bf4dc8', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../4efe75af0869dd71a26685c432e5284d71bf4dc8/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address