FreeBSD-stable-14-amd64-test - Build #1753 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-stable-14-amd64-test - Build #1754 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-stable-14-amd64-test - Build #1752 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Sat, 24 Jan 2026 15:03:14 UTC
FreeBSD-stable-14-amd64-test - Build #1753 (e4730bb6bbd703ae20b73922bb394c4038681b16) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1753/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1753/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1753/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

e4730bb6bbd703ae20b73922bb394c4038681b16 by kbowling:
Revert "e1000: Try auto-negotiation for fixed 100 or 10 configuration"



The end of the build log:

[...truncated 4.33 MiB...]
epair2b: Ethernet address: 02:85:15:7c:4b:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [1.197s]
sys/netpfil/common/pass_block:ipf_v4  ->  epair0a: Ethernet address: 02:8b:40:15:15:0a
epair0b: Ethernet address: 02:8b:40:15:15:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [1.103s]
sys/netpfil/common/pass_block:ipf_v6  ->  epair0a: Ethernet address: 02:ad:e0:90:44:0a
epair0b: Ethernet address: 02:ad:e0:90:44:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.092s]
sys/netpfil/common/pass_block:ipfw_v4  ->  epair0a: Ethernet address: 02:0d:75:7c:68:0a
epair0b: Ethernet address: 02:0d:75:7c:68:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [1.106s]
sys/netpfil/common/pass_block:ipfw_v6  ->  epair0a: Ethernet address: 02:4d:8e:ea:0c:0a
epair0b: Ethernet address: 02:4d:8e:ea:0c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.103s]
sys/netpfil/common/pass_block:pf_v4  ->  epair0a: Ethernet address: 02:b1:59:93:85:0a
epair0b: Ethernet address: 02:b1:59:93:85:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [1.116s]
sys/netpfil/common/pass_block:pf_v6  ->  epair0a: Ethernet address: 02:89:d6:ab:b1:0a
epair0b: Ethernet address: 02:89:d6:ab:b1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.118s]
sys/netpfil/common/rdr:ipfnat_basic  ->  epair0a: Ethernet address: 02:fa:2e:66:5c:0a
epair0b: Ethernet address: 02:fa:2e:66:5c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: Redirect failed  [1.194s]
sys/netpfil/common/rdr:ipfnat_local_redirect  ->  bridge0: Ethernet address: 42:1a:a5:f4:28:fe
epair0a: Ethernet address: 02:d0:7a:e4:29:0a
epair0b: Ethernet address: 02:d0:7a:e4:29:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:1b:cf:0b:34:0a
epair1b: Ethernet address: 02:1b:cf:0b:34:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
bridge0: link state changed to UP
lo0: link state changed to UP
epair1a: promiscuous mode enabled
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
bridge0: link state changed to DOWN
failed: Redirect failed  [1.248s]
sys/netpfil/common/rdr:pf_basic  ->  epair0a: Ethernet address: 02:21:72:93:41:0a
epair0b: Ethernet address: 02:21:72:93:41:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: Redirect failed  [1.114s]
sys/netpfil/common/rdr:pf_local_redirect  ->  bridge0: Ethernet address: 5a:c6:df:5d:53:bd
epair0a: Ethernet address: 02:ce:ff:51:73:0a
epair0b: Ethernet address: 02:ce:ff:51:73:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:b4:1d:68:53:0a
epair1b: Ethernet address: 02:b4:1d:68:53:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
bridge0: link state changed to UP
lo0: link state changed to UP
epair1a: promiscuous mode enabled
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
bridge0: link state changed to DOWN
failed: Redirect failed  [1.185s]
sys/netpfil/common/tos:ipfw_tos  ->  epair0a: Ethernet address: 02:de:ef:d8:c5:0a
epair0b: Ethernet address: 02:de:ef:d8:c5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ba:e3:b1:40:0a
epair1b: Ethernet address: 02:ba:e3:b1:40:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [5.119s]
sys/netpfil/common/tos:pf_tos  ->  epair0a: Ethernet address: 02:8a:c5:17:34:0a
epair0b: Ethernet address: 02:8a:c5:17:34:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:8c:c5:4f:b4:0a
epair1b: Ethernet address: 02:8c:c5:4f:b4:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [4.948s]
sys/netpfil/pf/altq:cbq_vlan  ->  skipped: Test requires ALTQ  [0.036s]
sys/netpfil/pf/altq:codel_bridge  ->  skipped: Test requires ALTQ  [0.036s]
sys/netpfil/pf/altq:codel_vlan  ->  skipped: Test requires ALTQ  [0.036s]
sys/netpfil/pf/altq:hfsc  ->  skipped: Test requires ALTQ  [0.036s]
sys/netpfil/pf/altq:match  ->  skipped: Test requires ALTQ  [0.036s]
sys/netpfil/pf/altq:prioritise  ->  skipped: Test requires ALTQ  [0.036s]
sys/netpfil/pf/anchor:nat  ->  epair0a: Ethernet address: 02:b0:ac:eb:3b:0a
epair0b: Ethernet address: 02:b0:ac:eb:3b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [11.119s]
sys/netpfil/pf/anchor:nested_anchor  ->  epair0a: Ethernet address: 02:3b:be:10:2a:0a
epair0b: Ethernet address: 02:3b:be:10:2a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.107s]
sys/netpfil/pf/anchor:pr183198  ->  epair0a: Ethernet address: 02:ca:33:a1:c3:0a
epair0b: Ethernet address: 02:ca:33:a1:c3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.117s]
sys/netpfil/pf/anchor:pr279225  ->  passed  [0.113s]
sys/netpfil/pf/anchor:wildcard  ->  epair0a: Ethernet address: 02:00:f9:36:d2:0a
epair0b: Ethernet address: 02:00:f9:36:d2:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [11.195s]
sys/netpfil/pf/divert-to:ipfwoff_in_div  ->  skipped: This test is for the case when ipfw is not loaded  [0.037s]
sys/netpfil/pf/divert-to:ipfwoff_in_div_in  ->  skipped: This test is for the case when ipfw is not loaded  [0.037s]
sys/netpfil/pf/divert-to:ipfwoff_in_div_in_fwd_out_div_out  ->  skipped: This test is for the case when ipfw is not loaded  [0.037s]
sys/netpfil/pf/divert-to:ipfwoff_out_div  ->  skipped: This test is for the case when ipfw is not loaded  [0.036s]
sys/netpfil/pf/divert-to:ipfwoff_out_div_out  ->  skipped: This test is for the case when ipfw is not loaded  [0.038s]
sys/netpfil/pf/divert-to:ipfwon_in_div  ->  epair0a: Ethernet address: 02:63:f5:28:e3:0a
epair0b: Ethernet address: 02:63:f5:28:e3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [13.209s]
sys/netpfil/pf/divert-to:ipfwon_in_div_in  ->  epair0a: Ethernet address: 02:c5:50:30:32:0a
epair0b: Ethernet address: 02:c5:50:30:32:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [13.507s]
sys/netpfil/pf/divert-to:ipfwon_in_div_in_fwd_out_div_out  ->  epair0a: Ethernet address: 02:a8:59:df:38:0a
epair0b: Ethernet address: 02:a8:59:df:38:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:b6:0b:72:04:0a
epair1b: Ethernet address: 02:b6:0b:72:04:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [13.786s]
sys/netpfil/pf/divert-to:ipfwon_out_div  ->  + rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-1753' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run.sh
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins4984421354077580366.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': 'e4730bb6bbd703ae20b73922bb394c4038681b16', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-14/latest_tested/amd64/amd64 -> ../../e4730bb6bbd703ae20b73922bb394c4038681b16/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address