FreeBSD-main-amd64-test - Build #27706 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27707 - Fixed"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Fri, 23 Jan 2026 10:37:45 UTC
FreeBSD-main-amd64-test - Build #27706 (f31336b3e3146fed9cc517fef8e877c17496f9e0) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27706/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27706/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27706/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

f31336b3e3146fed9cc517fef8e877c17496f9e0 by tuexen:
dpnaa2: announce transmit checksum support



The end of the build log:

[...truncated 4.14 MiB...]
epair1a: link state changed to DOWN
carp: 1@epair1b: BACKUP -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair1b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair1b: promiscuous mode disabled
passed  [6.072s]
sys/netinet/carp.py:TestCarp::test_source_mac  ->  epair0a: Ethernet address: 58:9c:fc:10:3e:f4
epair0b: Ethernet address: 58:9c:fc:10:35:74
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
carp: 1@epair0a: INIT -> BACKUP (initialization complete)
carp: 1@epair0a: BACKUP -> MASTER (master timed out)
carp: 1@epair0a: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0a: promiscuous mode disabled
passed  [6.130s]
sys/netinet/carp.py:TestCarp::test_source_mac_vrrp  ->  epair0a: Ethernet address: 58:9c:fc:10:3e:f4
epair0b: Ethernet address: 58:9c:fc:10:35:74
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
carp: 1@epair0a: INIT -> BACKUP (initialization complete)
carp: 1@epair0a: BACKUP -> MASTER (master timed out)
carp: 1@epair0a: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0a: promiscuous mode disabled
passed  [6.529s]
sys/netinet/divert:ipdivert_ip_input_local_success  ->  epair0a: Ethernet address: a6:b1:1a:d2:b9:86
epair0b: Ethernet address: d2:75:21:54:94:d9
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.093s]
sys/netinet/divert:ipdivert_ip_output_remote_success  ->  epair0a: Ethernet address: 56:cf:e9:50:54:2c
epair0b: Ethernet address: 76:e2:3b:60:17:7c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.111s]
sys/netinet/fibs:fibs_ifroutes1_success  ->  epair0a: Ethernet address: 58:9c:fc:10:3e:f4
epair0b: Ethernet address: 58:9c:fc:10:35:74
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.161s]
sys/netinet/fibs_multibind_test:multibind_different_user_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:multibind_different_user_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:multibind_different_user_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:multibind_different_user_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw  ->  skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw6  ->  skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs)  [0.006s]
sys/netinet/fibs_test:arpresolve_checks_interface_fib  ->  skipped: firewalls interfere with this test  [0.097s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: 02:b0:3a:6e:be:2f
tap1: Ethernet address: 26:9d:b0:62:b5:81
passed  [0.136s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: 8a:46:bf:d4:d4:f5
tap1: Ethernet address: 06:32:5a:c8:ae:29
passed  [0.147s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib  ->  tap0: Ethernet address: 0e:b5:e6:b3:88:9b
passed  [0.116s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6  ->  tap0: Ethernet address: 5a:54:e4:97:3d:a3
passed  [0.122s]
sys/netinet/fibs_test:same_ip_multiple_ifaces  ->  tap0: Ethernet address: 1e:24:cd:33:df:c4
tap1: Ethernet address: a2:3f:6a:1e:18:c1
tap2: Ethernet address: c2:7e:c2:67:c4:c7
tap3: Ethernet address: ce:e6:32:13:93:f7
passed  [0.160s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0  ->  tap0: Ethernet address: ca:95:01:07:b5:68
tap1: Ethernet address: 6e:8d:aa:83:a9:a6
expected_failure: The test results in an ifconfig error and thus spuriously fails: atf-check failed; see the output of the test for details  [0.108s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6  ->  tap0: Ethernet address: ee:dc:a2:9b:9c:31
tap1: Ethernet address: c6:f1:45:d4:5e:64
tap0: Ethernet address: a6:0e:a7:f7:3e:68
tap1: Ethernet address: 36:56:78:8e:6f:0a
passed  [0.193s]
sys/netinet/fibs_test:slaac_on_nondefault_fib6  ->  skipped: firewalls interfere with this test  [0.105s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: 32:00:d2:64:69:61
tap1: Ethernet address: 1a:7f:a0:98:d5:54
passed  [0.139s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: da:29:22:8c:76:c9
tap1: Ethernet address: 42:e2:57:3f:87:1c
passed  [0.131s]
sys/netinet/fibs_test:udp_dontroute  ->  tap0: Ethernet address: 7e:cb:ad:a6:87:68
tap1: Ethernet address: f6:7d:ff:e2:61:38
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: 02:a2:5b:78:65:66
tap1: Ethernet address: 66:62:6f:b1:af:f5
tap1: link state changed to UP
tap1: link state changed to DOWN
passed  [0.187s]
sys/netinet/fibs_test:udp_dontroute6  ->  tap0: Ethernet address: d6:90:59:a4:70:32
tap1: Ethernet address: 4a:d9:6e:c2:64:37
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: 32:d6:3f:a0:87:af
tap1: Ethernet address: fe:27:5f:78:d0:94
tap1: link state changed to UP
tap1: link state changed to DOWN
passed  [0.188s]
sys/netinet/forward:fwd_ip_blackhole  ->  epair0a: Ethernet address: be:bd:e9:3c:0b:36
epair0b: Ethernet address: aa:17:19:b3:c6:bc
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b2:fc:c5:58:89:f5
epair1b: Ethernet address: 36:2f:81:4b:11:df
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [3.299s]
sys/netinet/forward:fwd_ip_icmp_gw_fast_success  ->  epair0a: Ethernet address: 02:df:16:6e:55:dc
epair0b: Ethernet address: 06:1f:f9:bd:18:3b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address	= 0x30
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80cfd838
stack pointer	        = 0x0:0xfffffe008be47c80
frame pointer	        = 0x0:0xfffffe008be47cf0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (epair_task)
rdi: fffffe0082bf7a00 rsi: fffffe008be47c98 rdx: 0000000000000001
rcx: 0000000000000198  r8: 0000000000000002  r9: fffff80068461400
rax: 0000000000000000 rbx: fffff8006f693100 rbp: fffffe008be47cf0
r10: 0000000000000000 r11: 0000000000000001 r12: fffff8000395b000
r13: fffff800197ba780 r14: fffff8000372a100 r15: 0000000000000000
trap number		= 12
panic: page fault
cpuid = 1
time = 1769164662
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008be479b0
vpanic() at vpanic+0x136/frame 0xfffffe008be47ae0
panic() at panic+0x43/frame 0xfffffe008be47b40
trap_pfault() at trap_pfault+0x47c/frame 0xfffffe008be47bb0
calltrap() at calltrap+0x8/frame 0xfffffe008be47bb0
--- trap 0xc, rip = 0xffffffff80cfd838, rsp = 0xfffffe008be47c80, rbp = 0xfffffe008be47cf0 ---
bpf_mtap() at bpf_mtap+0x98/frame 0xfffffe008be47cf0
ether_nh_input() at ether_nh_input+0x109/frame 0xfffffe008be47d40
netisr_dispatch_src() at netisr_dispatch_src+0xb4/frame 0xfffffe008be47da0
ether_input() at ether_input+0xd5/frame 0xfffffe008be47e00
epair_tx_start_deferred() at epair_tx_start_deferred+0xd4/frame 0xfffffe008be47e40
taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008be47ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008be47ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008be47f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008be47f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 100114 ]
Stopped at      kdb_enter+0x33: movq    $0,0x11e96b2(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d3c4100
curthread    = 0xfffff800197ba780: pid 0 tid 100114 critnest 1 "epair_task"
curpcb       = 0xfffff800197bacd0
fpcurthread  = none
idlethread   = 0xfffff8010240c000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81da0d00
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008be48000
kcr3         = 0x80000000025a8004
ucr3         = 0xffffffffffffffff
scr3         = 0x19cd98dd5
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff80068461400
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 47m26s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27706' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins4779926943493759645.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'f31336b3e3146fed9cc517fef8e877c17496f9e0', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../f31336b3e3146fed9cc517fef8e877c17496f9e0/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address