FreeBSD-main-amd64-test - Build #27658 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27659 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27657 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Sun, 18 Jan 2026 13:47:11 UTC
FreeBSD-main-amd64-test - Build #27658 (afbb21bd1d6261a00b078c0847d5ecc8863585b7) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27658/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27658/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27658/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

325baf00735756d024b903bfcee50b4f09e90129 by kib:
vm/swap_pager.c: silence compiler warning

6dc12ecfb268d2d043f9415156d475278f3f714b by adrian:
spi: "-S" option for continuous stream from standard input to bus

1a7b74d3125fef50a6d2dcc4442c80457c8d32e1 by glebius:
ipfw: in a vnet destructor use NET_EPOCH_WAIT()

65b4bf7a6e0d415492889434a72085debdacdf82 by glebius:
ipfw: refactor how we store bpf tap points

35caa56a329deb0d13aa48ea1a6f7c1d5ebdb073 by glebius:
tests/ipfw: add a test for ipfw(4) log rules that write to bpf(4)

cd22fd0549c9a65b8806fd013f98be89c34c44f7 by jhibbits:
powerpc: Add ISA 2.06 sub-word atomic set/clear

afbb21bd1d6261a00b078c0847d5ecc8863585b7 by adrian:
aq: remove from NOTES; it's unfortunately amd64 only



The end of the build log:

[...truncated 4.32 MiB...]
epair0b: Ethernet address: c2:2f:ed:ee:02:83
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b2:be:7c:36:61:f0
epair1b: Ethernet address: 2e:55:c6:3b:af:37
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.539s]
sys/netpfil/pf/nat:nat_match  ->  epair0a: Ethernet address: 9a:3a:2d:2d:fe:b8
epair0b: Ethernet address: 3e:1f:b2:65:3b:b4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 66:53:82:27:f9:c8
epair1b: Ethernet address: 5a:90:33:4c:bb:c6
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.435s]
sys/netpfil/pf/nat:nat_pass_in  ->  epair0a: Ethernet address: ae:f8:2a:ee:aa:73
epair0b: Ethernet address: aa:7a:88:3f:66:3c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9a:18:39:df:c1:d0
epair1b: Ethernet address: ca:f8:e9:54:56:93
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.475s]
sys/netpfil/pf/nat:nat_pass_out  ->  epair0a: Ethernet address: 06:20:6f:78:0f:3a
epair0b: Ethernet address: ae:e1:c4:ac:50:b2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6a:ae:cb:11:04:2c
epair1b: Ethernet address: a2:36:82:cd:b4:db
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
passed  [2.426s]
sys/netpfil/pf/nat:nested_anchor  ->  epair0a: Ethernet address: 7e:ed:35:ec:0b:7d
epair0b: Ethernet address: 22:71:0b:ed:bd:0f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.429s]
sys/netpfil/pf/nat:no_addrs_random  ->  epair0a: Ethernet address: 7e:34:09:4a:20:24
epair0b: Ethernet address: 2a:c6:00:ad:1a:a8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 82:2d:79:29:1e:53
epair1b: Ethernet address: 9a:a3:0c:d1:93:f6
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [11.368s]
sys/netpfil/pf/nat:no_addrs_source_hash  ->  epair0a: Ethernet address: 5a:fa:77:32:7f:f8
epair0b: Ethernet address: b2:30:60:ad:e2:31
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ce:eb:9a:cc:fe:42
epair1b: Ethernet address: 7e:6b:60:ed:74:37
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [11.430s]
sys/netpfil/pf/nat44.py:TestNAT44::test_nat_igmp  ->  epair0a: Ethernet address: 26:33:1b:97:59:5f
epair0b: Ethernet address: 2a:f7:d0:51:36:4c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e2:86:1d:70:13:ad
epair1b: Ethernet address: 16:6e:ac:30:a1:60
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [19.393s]
sys/netpfil/pf/nat64:dummynet  ->  epair0a: Ethernet address: 3a:2d:96:d0:fa:2c
epair0b: Ethernet address: 6e:11:61:83:fc:59
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 32:fa:36:76:25:02
epair1b: Ethernet address: 66:48:7e:d8:d5:03
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [2.579s]
sys/netpfil/pf/nat64:fragmentation_in  ->  epair0a: Ethernet address: f6:fd:f2:c7:fc:7a
epair0b: Ethernet address: b2:f6:a9:96:7d:be
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: fa:bf:68:c0:40:9c
epair1b: Ethernet address: a2:cf:5a:27:4e:66
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [4.508s]
sys/netpfil/pf/nat64:fragmentation_out  ->  epair0a: Ethernet address: ce:a0:24:e8:ef:fa
epair0b: Ethernet address: 66:4b:39:a4:f7:bd
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9e:7e:7d:62:37:29
epair1b: Ethernet address: fa:1f:0d:fb:16:24
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [4.523s]
sys/netpfil/pf/nat64:gateway6  ->  epair0a: Ethernet address: be:33:f5:87:9e:83
epair0b: Ethernet address: 42:10:d4:ea:bd:e6
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:1c:58:5c:9d:3f
epair1b: Ethernet address: 1a:09:26:00:af:29
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 32:18:1e:7d:3c:c4
epair2b: Ethernet address: 52:de:25:f8:82:a3
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
panic: sleepq_add: td 0xfffff80102422780 to sleep on wchan 0xfffffe00b4c5e8f0 with sleeping prohibited
cpuid = 1
time = 1768744030
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008bc5dad0
vpanic() at vpanic+0x136/frame 0xfffffe008bc5dc00
panic() at panic+0x43/frame 0xfffffe008bc5dc60
sleepq_add() at sleepq_add+0x338/frame 0xfffffe008bc5dcb0
_sx_slock_hard() at _sx_slock_hard+0x2bd/frame 0xfffffe008bc5dd40
_sx_slock_int() at _sx_slock_int+0xad/frame 0xfffffe008bc5dd80
dyn_tick() at dyn_tick+0x39b/frame 0xfffffe008bc5de10
softclock_call_cc() at softclock_call_cc+0x19b/frame 0xfffffe008bc5dec0
softclock_thread() at softclock_thread+0xc6/frame 0xfffffe008bc5def0
fork_exit() at fork_exit+0x82/frame 0xfffffe008bc5df30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008bc5df30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 2 tid 100031 ]
Stopped at      kdb_enter+0x33: movq    $0,0x11e9ac2(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d3c4140
curthread    = 0xfffff80102422780: pid 2 tid 100031 critnest 1 "clock (0)"
curpcb       = 0xfffff80102422cd0
fpcurthread  = none
idlethread   = 0xfffff8010240c000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81da1480
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008bc5e000
kcr3         = 0x80000000025a8002
ucr3         = 0xffffffffffffffff
scr3         = 0x91497891
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff8004ea7d800
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h21m11s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27658' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./run.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins17070938280935090795.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'afbb21bd1d6261a00b078c0847d5ecc8863585b7', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../afbb21bd1d6261a00b078c0847d5ecc8863585b7/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address