FreeBSD-main-amd64-test - Build #27654 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27655 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27653 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Sun, 18 Jan 2026 04:06:39 UTC
FreeBSD-main-amd64-test - Build #27654 (74cac745fe302b26ad22114f60735c8b73e90571) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27654/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27654/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27654/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

74cac745fe302b26ad22114f60735c8b73e90571 by dim:
mxge(4): avoid clang 21 warning in NO-IP configuration



The end of the build log:

[...truncated 4.14 MiB...]
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0a: promiscuous mode disabled
passed  [6.443s]
sys/netinet/carp.py:TestCarp::test_source_mac_vrrp  ->  epair0a: Ethernet address: 58:9c:fc:10:e1:09
epair0b: Ethernet address: 58:9c:fc:10:8a:48
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
carp: 1@epair0a: INIT -> BACKUP (initialization complete)
carp: 1@epair0a: BACKUP -> MASTER (master timed out)
carp: 1@epair0a: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0a: promiscuous mode disabled
passed  [6.557s]
sys/netinet/divert:ipdivert_ip_input_local_success  ->  epair0a: Ethernet address: 3a:d1:7d:1e:98:53
epair0b: Ethernet address: 2e:30:5b:96:ea:17
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.095s]
sys/netinet/divert:ipdivert_ip_output_remote_success  ->  epair0a: Ethernet address: 0a:06:e3:40:cf:03
epair0b: Ethernet address: ee:0d:e9:34:e2:87
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.090s]
sys/netinet/fibs:fibs_ifroutes1_success  ->  epair0a: Ethernet address: 58:9c:fc:10:e1:09
epair0b: Ethernet address: 58:9c:fc:10:8a:48
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.173s]
sys/netinet/fibs_multibind_test:multibind_different_user_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:multibind_different_user_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:multibind_different_user_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.007s]
sys/netinet/fibs_multibind_test:multibind_different_user_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_dgram_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:multibind_lbgroup_stream_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:no_setfib_after_bind_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_dgram_socket_udp6  ->  skipped: FIB multibind not configured (net.inet.udp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_listening_socket_tcp6  ->  skipped: FIB multibind not configured (net.inet.tcp.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw  ->  skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs)  [0.006s]
sys/netinet/fibs_multibind_test:per_fib_raw_socket_raw6  ->  skipped: FIB multibind not configured (net.inet.raw.bind_all_fibs)  [0.006s]
sys/netinet/fibs_test:arpresolve_checks_interface_fib  ->  skipped: firewalls interfere with this test  [0.126s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: b2:23:8d:a6:65:c5
tap1: Ethernet address: 5e:54:5c:25:cf:e9
passed  [0.140s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: ae:a3:c8:f4:33:e2
tap1: Ethernet address: 96:69:d5:3f:12:cb
passed  [0.143s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib  ->  tap0: Ethernet address: d6:e5:23:0f:bb:9e
passed  [0.125s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6  ->  tap0: Ethernet address: ea:48:36:4f:46:a8
passed  [0.118s]
sys/netinet/fibs_test:same_ip_multiple_ifaces  ->  tap0: Ethernet address: 8e:0d:af:74:b7:5a
tap1: Ethernet address: 4e:b0:3a:d4:a5:f7
tap2: Ethernet address: 62:d7:07:94:37:e4
tap3: Ethernet address: 56:39:61:b8:21:a0
passed  [0.167s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0  ->  tap0: Ethernet address: 12:53:26:4c:d7:3d
tap1: Ethernet address: 4a:ed:8b:c5:f3:26
expected_failure: The test results in an ifconfig error and thus spuriously fails: atf-check failed; see the output of the test for details  [0.103s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6  ->  tap0: Ethernet address: f2:f7:4a:20:d5:3c
tap1: Ethernet address: 32:0a:52:c6:e5:9d
tap0: Ethernet address: 7a:b1:d8:03:46:bc
tap1: Ethernet address: e2:d2:96:ac:78:cf
passed  [0.253s]
sys/netinet/fibs_test:slaac_on_nondefault_fib6  ->  skipped: firewalls interfere with this test  [0.110s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: ea:d3:76:5c:83:90
tap1: Ethernet address: b6:b8:35:66:ce:23
passed  [0.132s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: 16:bf:c3:78:d6:27
tap1: Ethernet address: 96:41:dc:a9:0d:89
passed  [0.135s]
sys/netinet/fibs_test:udp_dontroute  ->  tap0: Ethernet address: de:a5:b8:d3:ae:17
tap1: Ethernet address: 22:df:cc:4b:fc:26
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: d2:2e:2a:2a:63:e9
tap1: Ethernet address: ba:86:1f:21:d5:e3
tap1: link state changed to UP
tap1: link state changed to DOWN
passed  [0.177s]
sys/netinet/fibs_test:udp_dontroute6  ->  tap0: Ethernet address: 1e:25:3a:b2:ff:93
tap1: Ethernet address: 46:d4:ff:94:e4:c9
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: 5a:99:38:15:db:ca
tap1: Ethernet address: a2:d0:6f:40:34:c2
tap1: link state changed to UP
tap1: link state changed to DOWN
passed  [0.178s]
sys/netinet/forward:fwd_ip_blackhole  ->  epair0a: Ethernet address: aa:c9:da:af:85:b7
epair0b: Ethernet address: 72:df:05:8f:86:e1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c6:4e:fa:64:77:54
epair1b: Ethernet address: 92:74:4e:84:ef:44
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [3.291s]
sys/netinet/forward:fwd_ip_icmp_gw_fast_success  ->  epair0a: Ethernet address: a6:5b:43:1b:ad:d2
epair0b: Ethernet address: be:81:85:c7:27:03
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.143s]
sys/netinet/forward:fwd_ip_icmp_gw_slow_success  ->  epair0a: Ethernet address: e2:da:92:29:61:f2
epair0b: Ethernet address: 66:7c:c0:eb:b1:cc
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.153s]
sys/netinet/forward:fwd_ip_icmp_iface_fast_success  ->  epair0a: Ethernet address: 4a:6b:3c:85:2a:a0
epair0b: Ethernet address: 9e:9a:89:64:ec:56
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address	= 0x30
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80cf1d68
stack pointer	        = 0x28:0xfffffe008bdedc80
frame pointer	        = 0x28:0xfffffe008bdedcf0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (epair_task)
rdi: fffffe0082bf7a00 rsi: fffffe008bdedc98 rdx: 0000000000000001
rcx: 00000000000001c5  r8: 0000000000000002  r9: fffff801aaf043c0
rax: 0000000000000000 rbx: fffff8022b65ae00 rbp: fffffe008bdedcf0
r10: 0000000000000000 r11: 0000000000000001 r12: fffff80003956200
r13: fffff800197b3780 r14: fffff80003720480 r15: 0000000000000000
trap number		= 12
panic: page fault
cpuid = 1
time = 1768709196
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008bded9b0
vpanic() at vpanic+0x136/frame 0xfffffe008bdedae0
panic() at panic+0x43/frame 0xfffffe008bdedb40
trap_pfault() at trap_pfault+0x47c/frame 0xfffffe008bdedbb0
calltrap() at calltrap+0x8/frame 0xfffffe008bdedbb0
--- trap 0xc, rip = 0xffffffff80cf1d68, rsp = 0xfffffe008bdedc80, rbp = 0xfffffe008bdedcf0 ---
bpf_mtap() at bpf_mtap+0x98/frame 0xfffffe008bdedcf0
ether_nh_input() at ether_nh_input+0x109/frame 0xfffffe008bdedd40
netisr_dispatch_src() at netisr_dispatch_src+0xb4/frame 0xfffffe008bdedda0
ether_input() at ether_input+0xd5/frame 0xfffffe008bdede00
epair_tx_start_deferred() at epair_tx_start_deferred+0xd4/frame 0xfffffe008bdede40
taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008bdedec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008bdedef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008bdedf30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008bdedf30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 100112 ]
Stopped at      kdb_enter+0x33: movq    $0,0x11f4902(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d3c5180
curthread    = 0xfffff800197b3780: pid 0 tid 100112 critnest 1 "epair_task"
curpcb       = 0xfffff800197b3cd0
fpcurthread  = none
idlethread   = 0xfffff8010240c000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81da0480
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008bdee000
kcr3         = 0x80000000025a3002
ucr3         = 0xffffffffffffffff
scr3         = 0x191a37a18
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff801aaf043c0
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 48m56s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27654' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./run.sh
x ./disable-dtrace-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins3876731949679321198.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '74cac745fe302b26ad22114f60735c8b73e90571', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../74cac745fe302b26ad22114f60735c8b73e90571/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address