FreeBSD-stable-14-amd64-test - Build #1724 - Failure

FreeBSD-stable-14-amd64-test - Build #1724 (215d16e4102b3c03c6bde13c78f57922b94ad74e) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1724/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1724/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1724/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

8d87742a96f59008e2fb655fa4434cd397d953a5 by jrhall:
RELNOTES:  Correct commit hash in commit ec98cb56861f

0e80562f15e3a634a2039cd88784957cb0f682c3 by dim:
zfs: emit .note.GNU-stack section for all ELF targets

215d16e4102b3c03c6bde13c78f57922b94ad74e by emaste:
openssh: Add detail on client side VersionAddendum



The end of the build log:

[...truncated 4.09 MiB...]
epair1b: Ethernet address: 02:03:b9:56:c1:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [4.993s]
sys/netpfil/pf/sctp:abort_v4  ->  epair0a: Ethernet address: 02:ec:8f:8a:62:0a
epair0b: Ethernet address: 02:ec:8f:8a:62:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [11.161s]
sys/netpfil/pf/sctp:abort_v6  ->  epair0a: Ethernet address: 02:57:36:62:a6:0a
epair0b: Ethernet address: 02:57:36:62:a6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.124s]
sys/netpfil/pf/sctp:basic_v4  ->  epair0a: Ethernet address: 02:a9:16:8b:41:0a
epair0b: Ethernet address: 02:a9:16:8b:41:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [11.157s]
sys/netpfil/pf/sctp:basic_v6  ->  epair0a: Ethernet address: 02:ed:00:13:1e:0a
epair0b: Ethernet address: 02:ed:00:13:1e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.135s]
sys/netpfil/pf/sctp:nat_v4  ->  epair0a: Ethernet address: 02:31:ba:ea:da:0a
epair0b: Ethernet address: 02:31:ba:ea:da:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:b6:9c:02:42:0a
epair1b: Ethernet address: 02:b6:9c:02:42:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [11.256s]
sys/netpfil/pf/sctp:nat_v6  ->  epair0a: Ethernet address: 02:38:c0:a4:aa:0a
epair0b: Ethernet address: 02:38:c0:a4:aa:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:9c:2c:07:96:0a
epair1b: Ethernet address: 02:9c:2c:07:96:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.208s]
sys/netpfil/pf/sctp:pfsync  ->  bridge0: Ethernet address: c2:62:36:df:1c:c2
bridge1: Ethernet address: ce:83:24:83:e0:ac
epair0a: Ethernet address: 02:40:d4:86:8d:0a
epair0b: Ethernet address: 02:40:d4:86:8d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:f5:79:7a:6f:0a
epair1b: Ethernet address: 02:f5:79:7a:6f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:aa:83:c3:95:0a
epair2b: Ethernet address: 02:aa:83:c3:95:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:52:32:0f:44:0a
epair3b: Ethernet address: 02:52:32:0f:44:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair4a: Ethernet address: 02:ba:f9:59:a9:0a
epair4b: Ethernet address: 02:ba:f9:59:a9:0b
epair4a: link state changed to UP
epair4b: link state changed to UP
epair5a: Ethernet address: 02:d6:06:f3:2e:0a
epair5b: Ethernet address: 02:d6:06:f3:2e:0b
epair5a: link state changed to UP
epair5b: link state changed to UP
epair6a: Ethernet address: 02:c7:c6:72:ef:0a
epair6b: Ethernet address: 02:c7:c6:72:ef:0b
epair6a: link state changed to UP
epair6b: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair2a: promiscuous mode enabled
bridge0: link state changed to UP
epair6a: promiscuous mode enabled
epair4a: promiscuous mode enabled
epair5a: promiscuous mode enabled
bridge1: link state changed to UP
epair1b: promiscuous mode enabled
epair4b: promiscuous mode enabled
carp: demoted by 240 to 240 (pfsync bulk start)
epair2b: promiscuous mode enabled
epair5b: promiscuous mode enabled
carp: demoted by 240 to 240 (pfsync bulk start)
carp: demoted by 50 to 290 (sysctl)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 50 (pfsync bulk done)
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
carp: demoted by 240 to 240 (interface down)
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
carp: demoted by 240 to 480 (interface down)
epair4b: link state changed to DOWN
epair4a: link state changed to DOWN
epair3a: link state changed to DOWN
epair3b: link state changed to DOWN
carp: demoted by 240 to 290 (interface down)
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
bridge0: link state changed to DOWN
carp: demoted by 240 to 530 (interface down)
epair5b: link state changed to DOWN
epair5a: link state changed to DOWN
epair6b: link state changed to DOWN
epair6a: link state changed to DOWN
bridge1: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [13.517s]
sys/netpfil/pf/sctp:rdr_v4  ->  epair0a: Ethernet address: 02:4d:0b:cf:e7:0a
epair0b: Ethernet address: 02:4d:0b:cf:e7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:e4:9c:23:94:0a
epair1b: Ethernet address: 02:e4:9c:23:94:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: SCTP connection failed  [4.254s]
sys/netpfil/pf/sctp:related_icmp  ->  epair0a: Ethernet address: 02:73:93:2f:99:0a
epair0b: Ethernet address: 02:73:93:2f:99:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:91:3a:30:3f:0a
epair1b: Ethernet address: 02:91:3a:30:3f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:e8:0c:f0:2f:0a
epair2b: Ethernet address: 02:e8:0c:f0:2f:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [11.267s]
sys/netpfil/pf/sctp:reuse  ->  epair0a: Ethernet address: 02:da:1a:61:8a:0a
epair0b: Ethernet address: 02:da:1a:61:8a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [11.156s]
sys/netpfil/pf/sctp:timeout  ->  passed  [0.109s]
sys/netpfil/pf/sctp.py:TestSCTP::test_allow_related  ->  epair0a: Ethernet address: 02:ca:ce:3b:e2:0a
epair0b: Ethernet address: 02:ca:ce:3b:e2:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/sctp.py:173: Exception  [243.900s]
sys/netpfil/pf/sctp.py:TestSCTP::test_disallow_related  ->  epair0a: Ethernet address: 02:db:0e:6e:3f:0a
epair0b: Ethernet address: 02:db:0e:6e:3f:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/sctp.py:173: Exception  [243.911s]
sys/netpfil/pf/sctp.py:TestSCTP::test_limit_addresses  ->  epair0a: Ethernet address: 02:eb:4e:76:24:0a
epair0b: Ethernet address: 02:eb:4e:76:24:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/sctp.py:173: Exception  [244.029s]
sys/netpfil/pf/sctp.py:TestSCTP::test_multihome  ->  epair0a: Ethernet address: 02:68:d4:4b:a1:0a
epair0b: Ethernet address: 02:68:d4:4b:a1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-1724' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins716400483377321725.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': '215d16e4102b3c03c6bde13c78f57922b94ad74e', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-14/latest_tested/amd64/amd64 -> ../../215d16e4102b3c03c6bde13c78f57922b94ad74e/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address