FreeBSD-stable-14-amd64-test - Build #1810 - Still Failing
Date: Wed, 18 Feb 2026 00:51:48 UTC
FreeBSD-stable-14-amd64-test - Build #1810 (0280fef4ba5e3baeac7511deea50b91466a69e95) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1810/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1810/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1810/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
4291d770fd8a9190f06910a91fb6bd6e77ded9ef by wulf:
evdev: Sync event codes with Linux kernel 6.18
0280fef4ba5e3baeac7511deea50b91466a69e95 by wulf:
evdev: Drop comments from input-event-codes.h
The end of the build log:
[...truncated 4.27 MiB...]
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [4.435s]
sys/netpfil/pf/scrub_pass:set_tos_v6 -> epair0a: Ethernet address: 02:24:08:9a:02:0a
epair0b: Ethernet address: 02:24:08:9a:02:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:0a:8d:75:fe:0a
epair1b: Ethernet address: 02:0a:8d:75:fe:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [4.441s]
sys/netpfil/pf/sctp:abort_v4 -> epair0a: Ethernet address: 02:83:ea:4c:e6:0a
epair0b: Ethernet address: 02:83:ea:4c:e6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [11.168s]
sys/netpfil/pf/sctp:abort_v6 -> epair0a: Ethernet address: 02:00:80:23:e0:0a
epair0b: Ethernet address: 02:00:80:23:e0:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.097s]
sys/netpfil/pf/sctp:basic_v4 -> epair0a: Ethernet address: 02:c8:39:4e:58:0a
epair0b: Ethernet address: 02:c8:39:4e:58:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [11.209s]
sys/netpfil/pf/sctp:basic_v6 -> epair0a: Ethernet address: 02:2d:bd:0f:12:0a
epair0b: Ethernet address: 02:2d:bd:0f:12:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [6.197s]
sys/netpfil/pf/sctp:nat_v4 -> epair0a: Ethernet address: 02:c7:62:46:c7:0a
epair0b: Ethernet address: 02:c7:62:46:c7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:8c:43:12:d9:0a
epair1b: Ethernet address: 02:8c:43:12:d9:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [11.255s]
sys/netpfil/pf/sctp:nat_v6 -> epair0a: Ethernet address: 02:1d:c9:d4:65:0a
epair0b: Ethernet address: 02:1d:c9:d4:65:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:b3:4e:20:1f:0a
epair1b: Ethernet address: 02:b3:4e:20:1f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.173s]
sys/netpfil/pf/sctp:pfsync -> bridge0: Ethernet address: de:42:89:18:b1:dd
bridge1: Ethernet address: b2:86:ef:a3:ef:31
epair0a: Ethernet address: 02:54:4e:ee:3c:0a
epair0b: Ethernet address: 02:54:4e:ee:3c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:78:52:40:f7:0a
epair1b: Ethernet address: 02:78:52:40:f7:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:b9:26:02:ad:0a
epair2b: Ethernet address: 02:b9:26:02:ad:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:40:39:a9:43:0a
epair3b: Ethernet address: 02:40:39:a9:43:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair4a: Ethernet address: 02:b6:a8:30:81:0a
epair4b: Ethernet address: 02:b6:a8:30:81:0b
epair4a: link state changed to UP
epair4b: link state changed to UP
epair5a: Ethernet address: 02:91:3c:cf:90:0a
epair5b: Ethernet address: 02:91:3c:cf:90:0b
epair5a: link state changed to UP
epair5b: link state changed to UP
epair6a: Ethernet address: 02:c4:6b:1f:38:0a
epair6b: Ethernet address: 02:c4:6b:1f:38:0b
epair6a: link state changed to UP
epair6b: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair2a: promiscuous mode enabled
bridge0: link state changed to UP
epair6a: promiscuous mode enabled
epair4a: promiscuous mode enabled
epair5a: promiscuous mode enabled
bridge1: link state changed to UP
epair1b: promiscuous mode enabled
epair4b: promiscuous mode enabled
carp: demoted by 240 to 240 (pfsync bulk start)
epair2b: promiscuous mode enabled
epair5b: promiscuous mode enabled
carp: demoted by 240 to 240 (pfsync bulk start)
carp: demoted by 50 to 290 (sysctl)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 50 (pfsync bulk done)
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
carp: demoted by 240 to 240 (interface down)
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
carp: demoted by 240 to 480 (interface down)
epair4b: link state changed to DOWN
epair4a: link state changed to DOWN
epair3a: link state changed to DOWN
epair3b: link state changed to DOWN
carp: demoted by 240 to 290 (interface down)
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
bridge0: link state changed to DOWN
carp: demoted by 240 to 530 (interface down)
epair5b: link state changed to DOWN
epair5a: link state changed to DOWN
epair6b: link state changed to DOWN
epair6a: link state changed to DOWN
bridge1: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [13.483s]
sys/netpfil/pf/sctp:rdr_v4 -> epair0a: Ethernet address: 02:84:15:94:8c:0a
epair0b: Ethernet address: 02:84:15:94:8c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:1f:e7:bb:41:0a
epair1b: Ethernet address: 02:1f:e7:bb:41:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: SCTP connection failed [4.283s]
sys/netpfil/pf/sctp:related_icmp -> epair0a: Ethernet address: 02:04:1e:df:73:0a
epair0b: Ethernet address: 02:04:1e:df:73:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:b3:5b:57:f3:0a
epair1b: Ethernet address: 02:b3:5b:57:f3:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:ec:68:d1:af:0a
epair2b: Ethernet address: 02:ec:68:d1:af:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [11.294s]
sys/netpfil/pf/sctp:reuse -> epair0a: Ethernet address: 02:1d:b8:26:be:0a
epair0b: Ethernet address: 02:1d:b8:26:be:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [11.175s]
sys/netpfil/pf/sctp:timeout -> passed [0.081s]
sys/netpfil/pf/sctp.py:TestSCTP::test_allow_related -> epair0a: Ethernet address: 02:5a:0c:97:03:0a
epair0b: Ethernet address: 02:5a:0c:97:03:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/sctp.py:173: Exception [243.565s]
sys/netpfil/pf/sctp.py:TestSCTP::test_disallow_related -> epair0a: Ethernet address: 02:55:a4:33:01:0a
epair0b: Ethernet address: 02:55:a4:33:01:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
broken: Test case body timed out [4760.153s]
sys/netpfil/pf/sctp.py:TestSCTP::test_limit_addresses -> epair0a: Ethernet address: 02:cd:33:9d:2a:0a
epair0b: Ethernet address: 02:cd:33:9d:2a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-1810' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./run.sh
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins13852867589780511768.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': '0280fef4ba5e3baeac7511deea50b91466a69e95', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-14/latest_tested/amd64/amd64 -> ../../0280fef4ba5e3baeac7511deea50b91466a69e95/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address