FreeBSD-main-amd64-test - Build #27880 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27881 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #27879 - Failure"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Tue, 17 Feb 2026 22:54:03 UTC
FreeBSD-main-amd64-test - Build #27880 (93122ead724b3ba0ccdaedadcd371ec53f9a9844) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27880/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27880/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27880/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

c4130a8a84e1ce0fc9c05d2b48f83e66ade302aa by brooks:
OpenSSL: install EVP_CIPHER_CTX_get_app_data.3 once

d7d0369ad331d17ca2bc0076b2f1ab8bed88c5f4 by phk:
recoverdisk: Ensure medium_read is multiple of small_read.

0f2b7181ea5acbabe11bf2c732078e8898c02c40 by phk:
bhyveload: If disk cannot be opened RW try RO. (=same as bhyve)

93122ead724b3ba0ccdaedadcd371ec53f9a9844 by michaelo:
mfi(4)/mrsas(4): Print driver versions consistently



The end of the build log:

[...truncated 4.37 MiB...]
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.193s]
sys/netpfil/pf/pass_block:noalias  ->  epair0a: Ethernet address: 7a:67:e7:10:ef:da
epair0b: Ethernet address: fa:d1:ae:3d:2d:7c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [12.492s]
sys/netpfil/pf/pass_block:optimize_any  ->  epair0a: Ethernet address: 5a:ae:83:40:0a:6d
epair0b: Ethernet address: ea:08:a6:ae:dc:e4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.199s]
sys/netpfil/pf/pass_block:received_on  ->  epair0a: Ethernet address: ea:64:51:dc:b6:8c
epair0b: Ethernet address: ca:49:4e:63:bb:a1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6e:21:41:ec:51:c9
epair1b: Ethernet address: 02:0c:5e:1c:c6:57
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: da:10:26:1d:06:ed
epair2b: Ethernet address: c2:fd:40:ca:0d:9a
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [55.783s]
sys/netpfil/pf/pass_block:urpf  ->  epair0a: Ethernet address: 72:9d:29:a9:d6:33
epair0b: Ethernet address: 32:de:a3:0f:00:f3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 52:77:41:85:bc:a7
epair1b: Ethernet address: d6:5c:53:41:e5:92
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [10.957s]
sys/netpfil/pf/pass_block:v4  ->  epair0a: Ethernet address: 86:7f:e0:33:54:0a
epair0b: Ethernet address: ee:b2:84:aa:81:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.264s]
sys/netpfil/pf/pass_block:v6  ->  epair0a: Ethernet address: be:9c:30:87:74:08
epair0b: Ethernet address: ae:82:86:12:36:b0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.353s]
sys/netpfil/pf/pflog:malformed  ->  epair0a: Ethernet address: fe:de:a5:cd:71:0a
epair0b: Ethernet address: 0a:61:61:d0:81:6c
epair0a: link state changed to UP
epair0b: link state changed to UP
pflog0: promiscuous mode enabled
epair0b: promiscuous mode enabled
pf: dropping packet with dangerous headers
epair0b: promiscuous mode disabled
pflog0: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.778s]
sys/netpfil/pf/pflog:matches  ->  epair0a: Ethernet address: e6:68:7b:53:2b:16
epair0b: Ethernet address: 26:99:38:a1:8b:b6
epair0a: link state changed to UP
epair0b: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.247s]
sys/netpfil/pf/pflog:matches_logif  ->  epair0a: Ethernet address: de:0d:1c:39:a9:32
epair0b: Ethernet address: 8e:12:2c:94:18:1b
epair0a: link state changed to UP
epair0b: link state changed to UP
pflog1: promiscuous mode enabled
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
pflog1: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.246s]
sys/netpfil/pf/pflog:rdr_action  ->  epair0a: Ethernet address: 96:3f:05:83:61:56
epair0b: Ethernet address: c6:6b:41:b1:79:c4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:76:33:a4:55:6e
epair1b: Ethernet address: 92:7c:a5:36:dd:60
epair1a: link state changed to UP
epair1b: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.410s]
sys/netpfil/pf/pflog:rule_number  ->  epair0a: Ethernet address: 06:be:b4:ac:56:2d
epair0b: Ethernet address: 6e:c2:a6:70:ad:83
epair0a: link state changed to UP
epair0b: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.251s]
sys/netpfil/pf/pflog:state_max  ->  epair0a: Ethernet address: c2:a3:1c:e1:75:9d
epair0b: Ethernet address: aa:90:44:ba:25:c5
epair0a: link state changed to UP
epair0b: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [23.427s]
sys/netpfil/pf/pflog:unspecified_v4  ->  lo0: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
passed  [12.207s]
sys/netpfil/pf/pflog:unspecified_v6  ->  lo0: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
passed  [12.210s]
sys/netpfil/pf/pflow:basic  ->  epair0a: Ethernet address: d2:60:28:99:e5:ed
epair0b: Ethernet address: c2:a6:54:57:29:95
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.205s]
sys/netpfil/pf/pflow:max_entries  ->  passed  [0.932s]
sys/netpfil/pf/pflow:nat  ->  epair0a: Ethernet address: 16:fe:42:58:dd:98
epair0b: Ethernet address: f6:33:84:4c:9d:ec
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6e:c2:1c:31:0e:f6
epair1b: Ethernet address: 52:56:ec:81:8e:4b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [66.658s]
sys/netpfil/pf/pflow:obs_dom  ->  passed  [0.125s]
sys/netpfil/pf/pflow:rule  ->  epair0a: Ethernet address: 06:a4:10:6f:13:73
epair0b: Ethernet address: aa:af:53:e4:19:6c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [132.656s]
sys/netpfil/pf/pflow:state_defaults  ->  epair0a: Ethernet address: c6:77:57:2c:51:41
epair0b: Ethernet address: ea:59:84:95:78:6a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [198.743s]
sys/netpfil/pf/pflow:v6  ->  epair0a: Ethernet address: 96:6b:38:b4:af:87
epair0b: Ethernet address: 0e:01:1a:fa:ee:f0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27880' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run.sh
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins5566921255078641601.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '93122ead724b3ba0ccdaedadcd371ec53f9a9844', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../93122ead724b3ba0ccdaedadcd371ec53f9a9844/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address