FreeBSD-main-amd64-test - Build #28368 - Failure
Date: Thu, 23 Apr 2026 11:47:21 UTC
FreeBSD-main-amd64-test - Build #28368 (06a51a510a60ca29193b2cdb8120b630ea9ef18c) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28368/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28368/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28368/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
bc537e970d7e52d278952915b0b1842dfbb03afc by fuz:
libc/fls*.c: use *_WIDTH macros over CHAR_BIT * sizeof(type)
06a51a510a60ca29193b2cdb8120b630ea9ef18c by dumbbell:
linuxkpi: Implement __GFP_THISNODE in alloc_pages()
The end of the build log:
[...truncated 5.14 MiB...]
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
lo1: link state changed to UP
passed [10.039s]
sys/net/if_clone_test:tap_ipv6_up_stress -> tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: EthernFATAL: command execution failed
et address:java.nio.channels.ClosedChannelException
at org.jenkinsci.remoting.protocol.NetworkLayer.onRecvClosed(NetworkLayer.java:155)
at org.jenkinsci.remoting.protocol.impl.NIONetworkLayer.ready(NIONetworkLayer.java:196)
at org.jenkinsci.remoting.protocol.IOHub$OnReady.run(IOHub.java:808)
at jenkins.util.ContextResettingExecutorService$1.run(ContextResettingExecutorService.java:28)
at jenkins.security.ImpersonatingExecutorService$1.run(ImpersonatingExecutorService.java:68)
at jenkins.util.ErrorLoggingExecutorService.lambda$wrap$0(ErrorLoggingExecutorService.java:51)
at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1144)
at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:642)
at java.base/java.lang.Thread.run(Thread.java:1583)
Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@74794119:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63660": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63660 failed. The channel is closing down or has closed down
at hudson.remoting.Channel.call(Channel.java:1101)
at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:306)
at jdk.proxy2/jdk.proxy2.$Proxy145.isAlive(Unknown Source)
at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1227)
at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1219)
at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:195)
at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:145)
at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92)
at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:818)
at hudson.model.Build$BuildExecution.build(Build.java:199)
at hudson.model.Build$BuildExecution.doRun(Build.java:164)
at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:527)
at hudson.model.Run.execute(Run.java:1842)
at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
at hudson.model.ResourceController.execute(ResourceController.java:97)
at hudson.model.Executor.run(Executor.java:456)
58:9FATAL: c:fUnable to delete script file /tmp/jenkins17090353264819278833.sh
c:10:ad:b5
java.nio.channels.ClosedChannelException
at org.jenkinsci.remoting.protocol.NetworkLayer.onRecvClosed(NetworkLayer.java:155)
at org.jenkinsci.remoting.protocol.impl.NIONetworkLayer.ready(NIONetworkLayer.java:196)
at org.jenkinsci.remoting.protocol.IOHub$OnReady.run(IOHub.java:808)
at jenkins.util.ContextResettingExecutorService$1.run(ContextResettingExecutorService.java:28)
at jenkins.security.ImpersonatingExecutorService$1.run(ImpersonatingExecutorService.java:68)
at jenkins.util.ErrorLoggingExecutorService.lambda$wrap$0(ErrorLoggingExecutorService.java:51)
at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1144)
at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:642)
at java.base/java.lang.Thread.run(Thread.java:1583)
Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@74794119:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63660": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:63660 failed. The channel is closing down or has closed down
at hudson.remoting.Channel.call(Channel.java:1101)
at hudson.FilePath.act(FilePath.java:1217)
at hudson.FilePath.act(FilePath.java:1206)
at hudson.FilePath.delete(FilePath.java:1753)
at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:163)
at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92)
at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:818)
at hudson.model.Build$BuildExecution.build(Build.java:199)
at hudson.model.Build$BuildExecution.doRun(Build.java:164)
at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:527)
at hudson.model.Run.execute(Run.java:1842)
at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
at hudson.model.ResourceController.execute(ResourceController.java:97)
at hudson.model.Executor.run(Executor.java:456)
tap0:Build step 'Execute shell' marked build as failure
Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58:9c:fc:10:ad:b5
tap0: Ethernet address: 58[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] Build does not have any of the results [SUCCESS]. Did not execute build step #0.
ERROR: Step ‘Publish JUnit test result report’ failed: no workspace for FreeBSD-main-amd64-test #28368
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address