FreeBSD-main-amd64-test - Build #28326 - Still Failing

From: <jenkins-admin_at_FreeBSD.org>
Date: Sat, 18 Apr 2026 16:58:05 UTC
FreeBSD-main-amd64-test - Build #28326 (90383181aae908d2c696f8d66c19645011b4c388) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28326/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28326/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28326/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

225a2dcb02943b5ed98b90f4a5c53b2a9b50f5a9 by bz:
rtw88: update Realtek's rtw88 driver

29163571ee4d00c3f15d26136c73587b3c537cff by bz:
rtw88: update Realtek's rtw88 driver

480ba21efdc7df5d972083e64c88c39357877c0b by des:
README: Update and harmonize

90383181aae908d2c696f8d66c19645011b4c388 by bz:
rtw88: update module Makefile for v7.0 driver version



The end of the build log:

[...truncated 4.17 MiB...]
epair1b: link state changed to DOWN
passed  [0.370s]
sys/netinet/multicast:MCAST_JOIN_GROUP  ->  epair0a: Ethernet address: ca:3e:02:de:e7:a0
epair0b: Ethernet address: ce:b2:30:40:b9:b3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ca:14:e7:37:d4:54
epair1b: Ethernet address: 22:c9:97:70:d0:7b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.371s]
sys/netinet/output:output_raw_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:84:d4
epair0b: Ethernet address: 58:9c:fc:10:d4:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:f1:ce
epair1b: Ethernet address: 58:9c:fc:10:09:e1
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.714s]
sys/netinet/output:output_raw_success  ->  epair0a: Ethernet address: 58:9c:fc:10:84:d4
epair0b: Ethernet address: 58:9c:fc:10:d4:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.181s]
sys/netinet/output:output_tcp_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:84:d4
epair0b: Ethernet address: 58:9c:fc:10:d4:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:f1:ce
epair1b: Ethernet address: 58:9c:fc:10:09:e1
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.232s]
sys/netinet/output:output_tcp_setup_success  ->  epair0a: Ethernet address: 58:9c:fc:10:84:d4
epair0b: Ethernet address: 58:9c:fc:10:d4:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.253s]
sys/netinet/output:output_udp_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:84:d4
epair0b: Ethernet address: 58:9c:fc:10:d4:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:f1:ce
epair1b: Ethernet address: 58:9c:fc:10:09:e1
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [8.647s]
sys/netinet/output:output_udp_setup_success  ->  epair0a: Ethernet address: 58:9c:fc:10:84:d4
epair0b: Ethernet address: 58:9c:fc:10:d4:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.350s]
sys/netinet/raw:input  ->  lo0: link state changed to UP
passed  [0.054s]
sys/netinet/raw:reconnect  ->  lo0: link state changed to UP
passed  [0.047s]
sys/netinet/redirect:valid_redirect  ->  epair0a: Ethernet address: 58:9c:fc:10:84:d4
epair0b: Ethernet address: 58:9c:fc:10:d4:ee
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.317s]
sys/netinet/so_reuseport_lb_test:basic_ipv4  ->  passed  [0.987s]
sys/netinet/so_reuseport_lb_test:basic_ipv6  ->  Limiting tcp reset response from 16296 to 196 packets/sec
Limiting tcp reset response from 13636 to 189 packets/sec
passed  [1.201s]
sys/netinet/so_reuseport_lb_test:bind_without_listen  ->  passed  [0.007s]
sys/netinet/so_reuseport_lb_test:concurrent_add  ->  passed  [2.602s]
sys/netinet/so_reuseport_lb_test:connect_bound  ->  passed  [0.005s]
sys/netinet/so_reuseport_lb_test:connect_not_bound  ->  passed  [0.006s]
sys/netinet/so_reuseport_lb_test:connect_udp  ->  passed  [0.210s]
sys/netinet/so_reuseport_lb_test:connect_udp6  ->  passed  [0.206s]
sys/netinet/so_reuseport_lb_test:double_listen_ipv4  ->  passed  [0.006s]
sys/netinet/so_reuseport_lb_test:double_listen_ipv6  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bind_connected_port  ->  passed  [0.009s]
sys/netinet/socket_afinet:socket_afinet_bind_ok  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bind_zero  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bindany  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_multibind  ->  passed  [0.118s]
sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_poll_rdhup  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_stream_reconnect  ->  passed  [0.005s]
sys/netinet/tcp_connect_port_test:basic_ipv4  ->  Limiting tcp reset response from 2635 to 188 packets/sec
Limiting tcp reset response from 22825 to 193 packets/sec
Limiting tcp reset response from 23499 to 187 packets/sec
passed  [2.769s]
sys/netinet/tcp_connect_port_test:basic_ipv6  ->  Limiting tcp reset response from 22654 to 214 packets/sec
Limiting tcp reset response from 15301 to 216 packets/sec
Limiting tcp reset response from 14457 to 191 packets/sec
Limiting tcp reset response from 14118 to 189 packets/sec
Limiting tcp reset response from 14374 to 216 packets/sec
passed  [4.400s]
TCP HPTS started 2 ((unbounded)) swi interrupt threads
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_concurrent_operations  ->  passed  [0.307s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_cpu_assignment  ->  passed  [0.320s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_deferred_requests  ->  Kernel page fault with the following non-sleepable locks held:
exclusive rw test-inp (test-inp) r = 0 (0xfffff80232fd5830) locked @ /usr/src/sys/netinet/tcp_hpts.c:1275
Kernel page fault with 1 sleep inhibitors
stack backtrace:
#0 0xffffffff80c54c1c at witness_debugger+0x6c
#1 0xffffffff80c56529 at witness_warn+0x4c9
#2 0xffffffff8113ccdc at trap_pfault+0x8c
#3 0xffffffff8110c318 at calltrap+0x8
#4 0xffffffff8315f866 at __ktest_deferred_requests+0x996
#5 0xffffffff830e3abd at run_test+0x2ad
#6 0xffffffff80e6de9c at nl_receive_message+0x11c
#7 0xffffffff80e6d7e5 at nl_taskqueue_handler+0x3e5
#8 0xffffffff80c468f2 at taskqueue_run_locked+0x1c2
#9 0xffffffff80c477e3 at taskqueue_thread_loop+0xd3
#10 0xffffffff80b899d2 at fork_exit+0x82
#11 0xffffffff8110d33e at fork_trampoline+0xe


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0xc8
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8316a3f1
stack pointer	        = 0x28:0xfffffe008c360ab0
frame pointer	        = 0x28:0xfffffe008c360bd0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (netlink_socket (PID)
rdi: fffff8013d338b00 rsi: 0000000000000001 rdx: ffffffff822691d8
rcx: 0000000000000001  r8: ffffffff81ad2ae0  r9: 0000000000000001
rax: 0000000000000000 rbx: 0000000000002000 rbp: fffffe008c360bd0
r10: 0000000000000000 r11: 0000000000000001 r12: fffff80232fd5800
r13: 0000000000000000 r14: fffff80232fd5848 r15: 0000000000001388
trap number		= 12
panic: page fault
cpuid = 0
time = 1776531473
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008c3607e0
vpanic() at vpanic+0x136/frame 0xfffffe008c360910
panic() at panic+0x43/frame 0xfffffe008c360970
trap_pfault() at trap_pfault+0x422/frame 0xfffffe008c3609e0
calltrap() at calltrap+0x8/frame 0xfffffe008c3609e0
--- trap 0xc, rip = 0xffffffff8316a3f1, rsp = 0xfffffe008c360ab0, rbp = 0xfffffe008c360bd0 ---
tcp_hptsi() at tcp_hptsi+0x6f1/frame 0xfffffe008c360bd0
__ktest_deferred_requests() at __ktest_deferred_requests+0x996/frame 0xfffffe008c360c60
run_test() at run_test+0x2ad/frame 0xfffffe008c360d00
nl_receive_message() at nl_receive_message+0x11c/frame 0xfffffe008c360d40
nl_taskqueue_handler() at nl_taskqueue_handler+0x3e5/frame 0xfffffe008c360e40
taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008c360ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008c360ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008c360f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008c360f30
--- trap 0x16, rip = 0xd3738a16d0a, rsp = 0xd373cfa6ec8, rbp = 0xd373cfa6ee0 ---
KDB: enter: panic
[ thread pid 0 tid 107520 ]
Stopped at      kdb_enter+0x33: movq    $0,0x15dd302(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0xdadcc0
curthread    = 0xfffff801c4bd2780: pid 0 tid 107520 critnest 1 "netlink_socket (PID"
curpcb       = 0xfffff801c4bd2cd0
fpcurthread  = none
idlethread   = 0xfffff8010240c780: tid 100003 "idle: cpu0"
self         = 0xffffffff82a10000
curpmap      = 0xffffffff81da2d20
tssp         = 0xffffffff82a10384
rsp0         = 0xfffffe008c361000
kcr3         = 0x8000000002946002
ucr3         = 0xffffffffffffffff
scr3         = 0x1e1bc1c37
gs32p        = 0xffffffff82a10404
ldt          = 0xffffffff82a10444
tss          = 0xffffffff82a10434
curvnet      = 0xfffff800030e7ec0
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 44m47s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-28326' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
x ./run.sh
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins10784174883873051422.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '90383181aae908d2c696f8d66c19645011b4c388', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../90383181aae908d2c696f8d66c19645011b4c388/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address