FreeBSD-main-amd64-test - Build #28297 - Still Failing

From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 16 Apr 2026 21:39:47 UTC
FreeBSD-main-amd64-test - Build #28297 (4dc6522d57c748cdaddd8327909574360a3de517) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28297/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28297/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28297/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

c8d25804f56ae7c35eaa492b6110807a2675d41a by pouria:
nd6: Add support for route information (RFC 4191)

4dc6522d57c748cdaddd8327909574360a3de517 by pouria:
rtadvd(8): Set route info lifetime to 0 during shutdown



The end of the build log:

[...truncated 4.29 MiB...]
#8 0xffffffff80fb7c55 at vslock+0x75
#9 0xffffffff80bea4aa at sysctl_wire_old_buffer+0x4a
#10 0xffffffff80dc7693 at sysctl_ip_mcast_filters+0x83
#11 0xffffffff80beae5c at sysctl_root_handler_locked+0x9c
#12 0xffffffff80bea1bf at sysctl_root+0x22f
#13 0xffffffff80bea8c6 at userland_sysctl+0x1b6
#14 0xffffffff80bea6d5 at sys___sysctl+0x65
#15 0xffffffff8113ca11 at amd64_syscall+0x451
#16 0xffffffff8110b4ab at fast_syscall_common+0xf8
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.009s]
sys/netinet/output:output_raw_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:8c:54
epair0b: Ethernet address: 58:9c:fc:10:51:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:18:8e
epair1b: Ethernet address: 58:9c:fc:10:41:f8
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.702s]
sys/netinet/output:output_raw_success  ->  epair0a: Ethernet address: 58:9c:fc:10:8c:54
epair0b: Ethernet address: 58:9c:fc:10:51:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.171s]
sys/netinet/output:output_tcp_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:8c:54
epair0b: Ethernet address: 58:9c:fc:10:51:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:18:8e
epair1b: Ethernet address: 58:9c:fc:10:41:f8
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.550s]
sys/netinet/output:output_tcp_setup_success  ->  epair0a: Ethernet address: 58:9c:fc:10:8c:54
epair0b: Ethernet address: 58:9c:fc:10:51:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.238s]
sys/netinet/output:output_udp_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:8c:54
epair0b: Ethernet address: 58:9c:fc:10:51:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:18:8e
epair1b: Ethernet address: 58:9c:fc:10:41:f8
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [8.579s]
sys/netinet/output:output_udp_setup_success  ->  epair0a: Ethernet address: 58:9c:fc:10:8c:54
epair0b: Ethernet address: 58:9c:fc:10:51:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.332s]
sys/netinet/raw:input  ->  lo0: link state changed to UP
passed  [0.054s]
sys/netinet/raw:reconnect  ->  lo0: link state changed to UP
passed  [0.052s]
sys/netinet/redirect:valid_redirect  ->  epair0a: Ethernet address: 58:9c:fc:10:8c:54
epair0b: Ethernet address: 58:9c:fc:10:51:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.299s]
sys/netinet/so_reuseport_lb_test:basic_ipv4  ->  Limiting tcp reset response from 14912 to 188 packets/sec
passed  [1.096s]
sys/netinet/so_reuseport_lb_test:basic_ipv6  ->  Limiting tcp reset response from 13489 to 201 packets/sec
passed  [1.204s]
sys/netinet/so_reuseport_lb_test:bind_without_listen  ->  passed  [0.007s]
sys/netinet/so_reuseport_lb_test:concurrent_add  ->  Limiting tcp reset response from 4171 to 209 packets/sec
passed  [2.602s]
sys/netinet/so_reuseport_lb_test:connect_bound  ->  passed  [0.006s]
sys/netinet/so_reuseport_lb_test:connect_not_bound  ->  passed  [0.005s]
sys/netinet/so_reuseport_lb_test:connect_udp  ->  passed  [0.208s]
sys/netinet/so_reuseport_lb_test:connect_udp6  ->  passed  [0.211s]
sys/netinet/so_reuseport_lb_test:double_listen_ipv4  ->  passed  [0.006s]
sys/netinet/so_reuseport_lb_test:double_listen_ipv6  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bind_connected_port  ->  passed  [0.008s]
sys/netinet/socket_afinet:socket_afinet_bind_ok  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bind_zero  ->  skipped: doesn't work when mac_portacl(4) loaded (https://bugs.freebsd.org/238781)  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bindany  ->  passed  [0.006s]
sys/netinet/socket_afinet:socket_afinet_multibind  ->  passed  [0.120s]
sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_poll_rdhup  ->  passed  [0.006s]
sys/netinet/socket_afinet:socket_afinet_stream_reconnect  ->  passed  [0.005s]
sys/netinet/tcp_connect_port_test:basic_ipv4  ->  Limiting tcp reset response from 6413 to 209 packets/sec
Limiting tcp reset response from 18900 to 195 packets/sec
Limiting tcp reset response from 15373 to 214 packets/sec
Limiting tcp reset response from 19037 to 202 packets/sec
passed  [3.522s]
sys/netinet/tcp_connect_port_test:basic_ipv6  ->  Limiting tcp reset response from 17357 to 197 packets/sec
Limiting tcp reset response from 14430 to 199 packets/sec
Limiting tcp reset response from 14208 to 189 packets/sec
Limiting tcp reset response from 14081 to 191 packets/sec
passed  [4.489s]
TCP HPTS started 2 ((unbounded)) swi interrupt threads
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_concurrent_operations  ->  passed  [0.315s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_cpu_assignment  ->  passed  [0.324s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_deferred_requests  ->  Kernel page fault with the following non-sleepable locks held:
exclusive rw test-inp (test-inp) r = 0 (0xfffff80003735830) locked @ /usr/src/sys/netinet/tcp_hpts.c:1275
Kernel page fault with 1 sleep inhibitors
stack backtrace:
#0 0xffffffff80c541fc at witness_debugger+0x6c
#1 0xffffffff80c55b09 at witness_warn+0x4c9
#2 0xffffffff8113bcdc at trap_pfault+0x8c
#3 0xffffffff8110abb8 at calltrap+0x8
#4 0xffffffff8315f866 at __ktest_deferred_requests+0x996
#5 0xffffffff830e3abd at run_test+0x2ad
#6 0xffffffff80e6d43c at nl_receive_message+0x11c
#7 0xffffffff80e6cd85 at nl_taskqueue_handler+0x3e5
#8 0xffffffff80c45ed2 at taskqueue_run_locked+0x1c2
#9 0xffffffff80c46dc3 at taskqueue_thread_loop+0xd3
#10 0xffffffff80b88fb2 at fork_exit+0x82
#11 0xffffffff8110bbde at fork_trampoline+0xe


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0xc8
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8316a3f1
stack pointer	        = 0x28:0xfffffe008c167ab0
frame pointer	        = 0x28:0xfffffe008c167bd0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (netlink_socket (PID)
rdi: fffff80157b3ec00 rsi: 0000000000000001 rdx: ffffffff822683f8
rcx: 0000000000000001  r8: ffffffff81ad2960  r9: 0000000000000001
rax: 0000000000000000 rbx: 0000000000002000 rbp: fffffe008c167bd0
r10: 0000000000000000 r11: 0000000000000001 r12: fffff80003735800
r13: 0000000000000000 r14: fffff80003735848 r15: 0000000000001388
trap number		= 12
panic: page fault
cpuid = 0
time = 1776375575
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008c1677e0
vpanic() at vpanic+0x136/frame 0xfffffe008c167910
panic() at panic+0x43/frame 0xfffffe008c167970
trap_pfault() at trap_pfault+0x422/frame 0xfffffe008c1679e0
calltrap() at calltrap+0x8/frame 0xfffffe008c1679e0
--- trap 0xc, rip = 0xffffffff8316a3f1, rsp = 0xfffffe008c167ab0, rbp = 0xfffffe008c167bd0 ---
tcp_hptsi() at tcp_hptsi+0x6f1/frame 0xfffffe008c167bd0
__ktest_deferred_requests() at __ktest_deferred_requests+0x996/frame 0xfffffe008c167c60
run_test() at run_test+0x2ad/frame 0xfffffe008c167d00
nl_receive_message() at nl_receive_message+0x11c/frame 0xfffffe008c167d40
nl_taskqueue_handler() at nl_taskqueue_handler+0x3e5/frame 0xfffffe008c167e40
taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008c167ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008c167ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008c167f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008c167f30
--- trap 0, rip = 0x2ca4069e88ed, rsp = 0x2ca406b588b0, rbp = 0x2ca4069ee0d5 ---
KDB: enter: panic
[ thread pid 0 tid 107527 ]
Stopped at      kdb_enter+0x33: movq    $0,0x15dcd22(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0xdadd00
curthread    = 0xfffff8017c878780: pid 0 tid 107527 critnest 1 "netlink_socket (PID"
curpcb       = 0xfffff8017c878cd0
fpcurthread  = none
idlethread   = 0xfffff8010240c780: tid 100003 "idle: cpu0"
self         = 0xffffffff82a10000
curpmap      = 0xffffffff81da1d20
tssp         = 0xffffffff82a10384
rsp0         = 0xfffffe008c168000
kcr3         = 0x8000000002945002
ucr3         = 0xffffffffffffffff
scr3         = 0x431ddc23
gs32p        = 0xffffffff82a10404
ldt          = 0xffffffff82a10444
tss          = 0xffffffff82a10434
curvnet      = 0xfffff800030e7ec0
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 46m0s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-28297' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins18053014694242608518.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '4dc6522d57c748cdaddd8327909574360a3de517', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../4dc6522d57c748cdaddd8327909574360a3de517/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address