FreeBSD-main-amd64-test - Build #28274 - Still Failing

From: <jenkins-admin_at_FreeBSD.org>
Date: Wed, 15 Apr 2026 06:44:35 UTC
FreeBSD-main-amd64-test - Build #28274 (6b00c652db7f43c698e8e3a902f266025c3126ac) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28274/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28274/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28274/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

6b00c652db7f43c698e8e3a902f266025c3126ac by glebius:
inpcb: make in6_pcbdisconnect() just like in_pcbdisconnect()



The end of the build log:

[...truncated 4.30 MiB...]
#6 0xffffffff80fbfc12 at vm_map_wire_locked+0x142
#7 0xffffffff80fbfa77 at vm_map_wire+0x67
#8 0xffffffff80fb6c75 at vslock+0x75
#9 0xffffffff80bea3fa at sysctl_wire_old_buffer+0x4a
#10 0xffffffff80dc7463 at sysctl_ip_mcast_filters+0x83
#11 0xffffffff80beadac at sysctl_root_handler_locked+0x9c
#12 0xffffffff80bea10f at sysctl_root+0x22f
#13 0xffffffff80bea816 at userland_sysctl+0x1b6
#14 0xffffffff80bea625 at sys___sysctl+0x65
#15 0xffffffff8113ba11 at amd64_syscall+0x451
#16 0xffffffff8110a86b at fast_syscall_common+0xf8
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.996s]
sys/netinet/output:output_raw_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:9b:51
epair0b: Ethernet address: 58:9c:fc:10:82:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:d3:6d
epair1b: Ethernet address: 58:9c:fc:10:bf:f9
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.705s]
sys/netinet/output:output_raw_success  ->  epair0a: Ethernet address: 58:9c:fc:10:9b:51
epair0b: Ethernet address: 58:9c:fc:10:82:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.194s]
sys/netinet/output:output_tcp_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:9b:51
epair0b: Ethernet address: 58:9c:fc:10:82:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:d3:6d
epair1b: Ethernet address: 58:9c:fc:10:bf:f9
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.425s]
sys/netinet/output:output_tcp_setup_success  ->  epair0a: Ethernet address: 58:9c:fc:10:9b:51
epair0b: Ethernet address: 58:9c:fc:10:82:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.265s]
sys/netinet/output:output_udp_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:9b:51
epair0b: Ethernet address: 58:9c:fc:10:82:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:d3:6d
epair1b: Ethernet address: 58:9c:fc:10:bf:f9
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [8.406s]
sys/netinet/output:output_udp_setup_success  ->  epair0a: Ethernet address: 58:9c:fc:10:9b:51
epair0b: Ethernet address: 58:9c:fc:10:82:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.262s]
sys/netinet/raw:input  ->  lo0: link state changed to UP
passed  [0.057s]
sys/netinet/raw:reconnect  ->  lo0: link state changed to UP
passed  [0.050s]
sys/netinet/redirect:valid_redirect  ->  epair0a: Ethernet address: 58:9c:fc:10:9b:51
epair0b: Ethernet address: 58:9c:fc:10:82:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.457s]
sys/netinet/so_reuseport_lb_test:basic_ipv4  ->  Limiting tcp reset response from 15140 to 215 packets/sec
passed  [1.084s]
sys/netinet/so_reuseport_lb_test:basic_ipv6  ->  Limiting tcp reset response from 17216 to 214 packets/sec
passed  [0.924s]
sys/netinet/so_reuseport_lb_test:bind_without_listen  ->  passed  [0.007s]
sys/netinet/so_reuseport_lb_test:concurrent_add  ->  passed  [2.598s]
sys/netinet/so_reuseport_lb_test:connect_bound  ->  passed  [0.006s]
sys/netinet/so_reuseport_lb_test:connect_not_bound  ->  passed  [0.006s]
sys/netinet/so_reuseport_lb_test:connect_udp  ->  passed  [0.210s]
sys/netinet/so_reuseport_lb_test:connect_udp6  ->  passed  [0.211s]
sys/netinet/so_reuseport_lb_test:double_listen_ipv4  ->  passed  [0.006s]
sys/netinet/so_reuseport_lb_test:double_listen_ipv6  ->  passed  [0.006s]
sys/netinet/socket_afinet:socket_afinet  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bind_connected_port  ->  passed  [0.008s]
sys/netinet/socket_afinet:socket_afinet_bind_ok  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bind_zero  ->  skipped: doesn't work when mac_portacl(4) loaded (https://bugs.freebsd.org/238781)  [0.005s]
sys/netinet/socket_afinet:socket_afinet_bindany  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_multibind  ->  passed  [0.161s]
sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup  ->  passed  [0.006s]
sys/netinet/socket_afinet:socket_afinet_poll_rdhup  ->  passed  [0.005s]
sys/netinet/socket_afinet:socket_afinet_stream_reconnect  ->  passed  [0.005s]
sys/netinet/tcp_connect_port_test:basic_ipv4  ->  Limiting tcp reset response from 17166 to 207 packets/sec
Limiting tcp reset response from 17395 to 205 packets/sec
Limiting tcp reset response from 14735 to 214 packets/sec
Limiting tcp reset response from 14688 to 196 packets/sec
passed  [4.042s]
sys/netinet/tcp_connect_port_test:basic_ipv6  ->  Limiting tcp reset response from 18332 to 188 packets/sec
Limiting tcp reset response from 18921 to 186 packets/sec
Limiting tcp reset response from 18876 to 199 packets/sec
passed  [3.517s]
TCP HPTS started 2 ((unbounded)) swi interrupt threads
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_concurrent_operations  ->  passed  [0.337s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_cpu_assignment  ->  passed  [0.357s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_deferred_requests  ->  Kernel page fault with the following non-sleepable locks held:
exclusive rw test-inp (test-inp) r = 0 (0xfffff8000351f030) locked @ /usr/src/sys/netinet/tcp_hpts.c:1275
Kernel page fault with 1 sleep inhibitors
stack backtrace:
#0 0xffffffff80c5414c at witness_debugger+0x6c
#1 0xffffffff80c55a59 at witness_warn+0x4c9
#2 0xffffffff8113acdc at trap_pfault+0x8c
#3 0xffffffff81109f78 at calltrap+0x8
#4 0xffffffff8315f866 at __ktest_deferred_requests+0x996
#5 0xffffffff830e3abd at run_test+0x2ad
#6 0xffffffff80e6c59c at nl_receive_message+0x11c
#7 0xffffffff80e6bee5 at nl_taskqueue_handler+0x3e5
#8 0xffffffff80c45e22 at taskqueue_run_locked+0x1c2
#9 0xffffffff80c46d13 at taskqueue_thread_loop+0xd3
#10 0xffffffff80b88f02 at fork_exit+0x82
#11 0xffffffff8110af9e at fork_trampoline+0xe


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address	= 0xc8
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8316a3f1
stack pointer	        = 0:0xfffffe008c04aab0
frame pointer	        = 0:0xfffffe008c04abd0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (netlink_socket (PID)
rdi: fffff80003511900 rsi: 0000000000000001 rdx: ffffffff822691c8
rcx: 0000000000000001  r8: ffffffff81ad2960  r9: 0000000000000001
rax: 0000000000000000 rbx: 0000000000002000 rbp: fffffe008c04abd0
r10: 0000000000000000 r11: 0000000000000001 r12: fffff8000351f000
r13: 0000000000000000 r14: fffff8000351f048 r15: 0000000000001388
trap number		= 12
panic: page fault
cpuid = 1
time = 1776235433
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008c04a7e0
vpanic() at vpanic+0x136/frame 0xfffffe008c04a910
panic() at panic+0x43/frame 0xfffffe008c04a970
trap_pfault() at trap_pfault+0x422/frame 0xfffffe008c04a9e0
calltrap() at calltrap+0x8/frame 0xfffffe008c04a9e0
--- trap 0xc, rip = 0xffffffff8316a3f1, rsp = 0xfffffe008c04aab0, rbp = 0xfffffe008c04abd0 ---
tcp_hptsi() at tcp_hptsi+0x6f1/frame 0xfffffe008c04abd0
__ktest_deferred_requests() at __ktest_deferred_requests+0x996/frame 0xfffffe008c04ac60
run_test() at run_test+0x2ad/frame 0xfffffe008c04ad00
nl_receive_message() at nl_receive_message+0x11c/frame 0xfffffe008c04ad40
nl_taskqueue_handler() at nl_taskqueue_handler+0x3e5/frame 0xfffffe008c04ae40
taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008c04aec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008c04aef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008c04af30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008c04af30
--- trap 0xc, rip = 0x361b6132ad0a, rsp = 0x361b6665cec8, rbp = 0x361b6665cee0 ---
KDB: enter: panic
[ thread pid 0 tid 107518 ]
Stopped at      kdb_enter+0x33: movq    $0,0x15dcdd2(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d3bdd00
curthread    = 0xfffff80021e87780: pid 0 tid 107518 critnest 1 "netlink_socket (PID"
curpcb       = 0xfffff80021e87cd0
fpcurthread  = none
idlethread   = 0xfffff8010240c000: tid 100004 "idle: cpu1"
self         = 0xffffffff82a11000
curpmap      = 0xffffffff81da1d20
tssp         = 0xffffffff82a11384
rsp0         = 0xfffffe008c04b000
kcr3         = 0x8000000002945002
ucr3         = 0xffffffffffffffff
scr3         = 0x1c4c58c33
gs32p        = 0xffffffff82a11404
ldt          = 0xffffffff82a11444
tss          = 0xffffffff82a11434
curvnet      = 0xfffff800030e7ec0
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 45m42s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-28274' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./run.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins205076507685884418.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '6b00c652db7f43c698e8e3a902f266025c3126ac', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../6b00c652db7f43c698e8e3a902f266025c3126ac/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address