FreeBSD-stable-15-amd64-test - Build #72 - Still Failing
Date: Wed, 15 Oct 2025 08:05:30 UTC
FreeBSD-stable-15-amd64-test - Build #72 (ad2ca1c5c17935d8601b3ee48f705e1e5ede57bc) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/72/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/72/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/72/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
ad2ca1c5c17935d8601b3ee48f705e1e5ede57bc by cperciva:
vmimage.subr: Sort METALOG before running makefs
The end of the build log:
[...truncated 3.96 MiB...]
epair0b: Ethernet address: 9e:ce:68:f7:c8:69
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c6:13:cf:26:3b:dc
epair1b: Ethernet address: 0a:06:31:f3:e2:a8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.173s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 1e:89:5c:c0:24:04
epair0b: Ethernet address: b6:71:c9:2b:0f:30
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:b9:e9:69:29:6f
epair1b: Ethernet address: c6:42:60:c4:ea:40
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 52:6c:a3:49:57:e7
epair0b: Ethernet address: 1e:e2:96:f6:d6:95
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e6:cf:da:e2:b4:7a
epair1b: Ethernet address: b6:6f:39:5c:1f:30
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: da:66:b1:cc:10:0b
epair0b: Ethernet address: 82:d2:91:71:37:cb
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: aa:fe:7e:e9:0a:ae
epair1b: Ethernet address: fe:a8:f7:43:42:12
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: aa:36:b9:74:d0:1c
epair0b: Ethernet address: ea:24:63:be:c8:b3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 96:eb:03:6b:a4:2f
epair1b: Ethernet address: da:f4:20:36:9d:c1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 86:55:87:d9:ff:7b
epair0b: Ethernet address: 82:02:6b:61:58:0c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: fa:8c:b6:bd:a2:cf
epair1b: Ethernet address: 2a:1a:73:e0:2c:05
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: f6:c8:b8:54:39:16
epair0b: Ethernet address: 86:af:81:fe:25:f4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 86:09:ba:f3:68:a0
epair1b: Ethernet address: 22:ed:97:24:68:64
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 6a:9e:a0:7d:42:67
epair0b: Ethernet address: ce:49:3e:ba:b2:3d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 92:c4:94:31:a2:3b
epair1b: Ethernet address: a6:9c:72:55:4d:e1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: f6:ec:31:ed:42:a8
epair0b: Ethernet address: 52:4e:44:10:69:ab
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 16:1f:4e:d4:86:87
epair1b: Ethernet address: 46:44:07:f9:7e:11
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: e2:5c:9f:16:05:4a
epair2b: Ethernet address: 3e:bf:e8:f8:d6:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.238s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: fa:70:c7:00:72:49
epair0b: Ethernet address: 92:24:f6:18:c1:4a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c6:c7:ff:e0:b6:79
epair1b: Ethernet address: 3a:1d:7b:f9:f9:80
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: f2:19:e5:b0:74:31
epair2b: Ethernet address: 5a:01:e9:a3:98:a6
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.669s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 66:0d:37:a0:07:4e
epair0b: Ethernet address: be:74:2e:14:48:9f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 16:72:0a:e5:c2:d8
epair1b: Ethernet address: a6:21:e6:e2:46:b0
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: f6:c4:8a:77:f8:b4
epair2b: Ethernet address: 3e:f4:81:2a:7c:77
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f0e2
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff80230dcb296 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 1
time = 1760515514
KDB: stack backtrace:
#0 0xffffffff80bc02ed at kdb_backtrace+0x5d
#1 0xffffffff80b736d6 at vpanic+0x136
#2 0xffffffff80b73593 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051d88 at calltrap+0x8
#5 0xffffffff80d84ab9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc33f8 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b34 at ip6_input+0x484
#14 0xffffffff80cc0c58 at swi_net+0x128
#15 0xffffffff80b2d309 at ithread_loop+0x239
#16 0xffffffff80b2989b at fork_exit+0x7b
#17 0xffffffff81052dae at fork_trampoline+0xe
Uptime: 1h23m9s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-72' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./run.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins1634315289219900881.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': 'ad2ca1c5c17935d8601b3ee48f705e1e5ede57bc', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../ad2ca1c5c17935d8601b3ee48f705e1e5ede57bc/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address