FreeBSD-main-amd64-test - Build #26992 - Still Failing

From: <jenkins-admin_at_FreeBSD.org>
Date: Tue, 14 Oct 2025 20:20:42 UTC
FreeBSD-main-amd64-test - Build #26992 (86d17239233ea4f5766bee68ba6355804525cefa) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26992/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26992/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26992/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

663a571514fbbc237ac841f7ff2f5e26db966445 by glebius:
sockets: add PF_HYPERV alias

86d17239233ea4f5766bee68ba6355804525cefa by glebius:
socket(2): refactor the manual page



The end of the build log:

[...truncated 4.20 MiB...]
epair1b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.307s]
sys/netinet/multicast:IP_ADD_MEMBERSHIP_ip_mreqn  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:43:b7
epair1b: Ethernet address: 58:9c:fc:10:e1:8b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.304s]
sys/netinet/multicast:MCAST_JOIN_GROUP  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:43:b7
epair1b: Ethernet address: 58:9c:fc:10:e1:8b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.290s]
sys/netinet/output:output_raw_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:43:b7
epair1b: Ethernet address: 58:9c:fc:10:e1:8b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.844s]
sys/netinet/output:output_raw_success  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.213s]
sys/netinet/output:output_tcp_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:43:b7
epair1b: Ethernet address: 58:9c:fc:10:e1:8b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [3.169s]
sys/netinet/output:output_tcp_setup_success  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.499s]
sys/netinet/output:output_udp_flowid_mpath_success  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 58:9c:fc:10:43:b7
epair1b: Ethernet address: 58:9c:fc:10:e1:8b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [8.729s]
sys/netinet/output:output_udp_setup_success  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.410s]
sys/netinet/redirect:valid_redirect  ->  epair0a: Ethernet address: 58:9c:fc:10:71:a8
epair0b: Ethernet address: 58:9c:fc:10:2d:96
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.705s]
sys/netinet/so_reuseport_lb_test:basic_ipv4  ->  Limiting tcp reset response from 8424 to 198 packets/sec
passed  [1.903s]
sys/netinet/so_reuseport_lb_test:basic_ipv6  ->  Limiting tcp reset response from 8407 to 191 packets/sec
Limiting tcp reset response from 7397 to 203 packets/sec
Limiting tcp reset response from 7290 to 216 packets/sec
passed  [2.225s]
sys/netinet/so_reuseport_lb_test:bind_without_listen  ->  passed  [0.009s]
sys/netinet/so_reuseport_lb_test:concurrent_add  ->  passed  [2.604s]
sys/netinet/so_reuseport_lb_test:connect_bound  ->  passed  [0.008s]
sys/netinet/so_reuseport_lb_test:connect_not_bound  ->  passed  [0.007s]
sys/netinet/so_reuseport_lb_test:double_listen_ipv4  ->  passed  [0.007s]
sys/netinet/so_reuseport_lb_test:double_listen_ipv6  ->  passed  [0.007s]
sys/netinet/socket_afinet:socket_afinet  ->  passed  [0.007s]
sys/netinet/socket_afinet:socket_afinet_bind_connected_port  ->  passed  [0.010s]
sys/netinet/socket_afinet:socket_afinet_bind_ok  ->  passed  [0.006s]
sys/netinet/socket_afinet:socket_afinet_bind_zero  ->  skipped: doesn't work when mac_portacl(4) loaded (https://bugs.freebsd.org/238781)  [0.007s]
sys/netinet/socket_afinet:socket_afinet_bindany  ->  passed  [0.007s]
sys/netinet/socket_afinet:socket_afinet_multibind  ->  passed  [0.179s]
sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup  ->  passed  [0.007s]
sys/netinet/socket_afinet:socket_afinet_poll_rdhup  ->  passed  [0.007s]
sys/netinet/socket_afinet:socket_afinet_stream_reconnect  ->  passed  [0.007s]
sys/netinet/tcp_connect_port_test:basic_ipv4  ->  Limiting tcp reset response from 1001 to 216 packets/sec
Limiting tcp reset response from 9858 to 204 packets/sec
Limiting tcp reset response from 9851 to 204 packets/sec
Limiting tcp reset response from 9988 to 201 packets/sec
Limiting tcp reset response from 9753 to 192 packets/sec
Limiting tcp reset response from 9996 to 211 packets/sec
Limiting tcp reset response from 9956 to 186 packets/sec
passed  [6.557s]
sys/netinet/tcp_connect_port_test:basic_ipv6  ->  Limiting tcp reset response from 9262 to 204 packets/sec
Limiting tcp reset response from 9031 to 211 packets/sec
Limiting tcp reset response from 8917 to 186 packets/sec
Limiting tcp reset response from 8989 to 192 packets/sec
Limiting tcp reset response from 9141 to 190 packets/sec
Limiting tcp reset response from 9128 to 190 packets/sec
Limiting tcp reset response from 8840 to 209 packets/sec
passed  [7.270s]
TCP HPTS started 2 ((unbounded)) swi interrupt threads
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_concurrent_operations  ->  failed: /usr/tests/atf_python/sys/netlink/netlink.py:376: ValueError  [0.695s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_cpu_assignment  ->  passed  [0.467s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_deferred_requests  ->  failed: /usr/tests/atf_python/sys/netlink/netlink.py:376: ValueError  [0.675s]
sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_direct_wake_mechanism  ->  Sleeping on "-" with the following non-sleepable locks held:
exclusive sleep mutex tcp_hpts_lck (hpts) r = 0 (0xfffff8015daa5400) locked @ /usr/src/sys/netinet/tcp_hpts_test.c:1467
stack backtrace:
#0 0xffffffff80c061ec at witness_debugger+0x6c
#1 0xffffffff80c07400 at witness_warn+0x430
#2 0xffffffff80b9a938 at _sleep+0x58
#3 0xffffffff80bf8ea1 at taskqueue_thread_loop+0xc1
#4 0xffffffff80b3e482 at fork_exit+0x82
#5 0xffffffff810b45de at fork_trampoline+0xe
Sleeping on "-" with the following non-sleepable locks held:
exclusive sleep mutex tcp_hpts_lck (hpts) r = 0 (0xfffff8015daa5400) locked @ /usr/src/sys/netinet/tcp_hpts_test.c:1467
stack backtrace:
#0 0xffffffff80c061ec at witness_debugger+0x6c
#1 0xffffffff80c07400 at witness_warn+0x430
#2 0xffffffff80b9a938 at _sleep+0x58
#3 0xffffffff80bf8ea1 at taskqueue_thread_loop+0xc1
#4 0xffffffff80b3e482 at fork_exit+0x82
#5 0xffffffff810b45de at fork_trampoline+0xe
Thread 0xfffff801c4a5a000 exiting with the following locks held:
exclusive sleep mutex tcp_hpts_lck (hpts) r = 0 (0xfffff8015daa5400) locked @ /usr/src/sys/netinet/tcp_hpts_test.c:1467
panic: Thread 0xfffff801c4a5a000 cannot exit while holding sleeplocks

cpuid = 0
time = 1760473241
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008c095c70
vpanic() at vpanic+0x136/frame 0xfffffe008c095da0
panic() at panic+0x43/frame 0xfffffe008c095e00
witness_thread_exit() at witness_thread_exit+0x1ea/frame 0xfffffe008c095e60
thread_exit() at thread_exit+0x26d/frame 0xfffffe008c095e90
kthread_exit() at kthread_exit+0xb1/frame 0xfffffe008c095ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0x1e9/frame 0xfffffe008c095ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008c095f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008c095f30
--- trap 0x16, rip = 0x21fbe03ea9da, rsp = 0x21fbe392fed8, rbp = 0x21fbe392fef0 ---
KDB: enter: panic
[ thread pid 0 tid 106095 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121d092(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0xa07680
curthread    = 0xfffff801c4a5a000: pid 0 tid 106095 critnest 1 "netlink_socket (PID"
curpcb       = 0xfffff801c4a5a550
fpcurthread  = none
idlethread   = 0xfffff8000460b780: tid 100003 "idle: cpu0"
self         = 0xffffffff82610000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82610384
rsp0         = 0xfffffe008c096000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x50787a2e
gs32p        = 0xffffffff82610404
ldt          = 0xffffffff82610444
tss          = 0xffffffff82610434
curvnet      = 0
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 46m31s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26992' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./run.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins10165152027942218015.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '86d17239233ea4f5766bee68ba6355804525cefa', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../86d17239233ea4f5766bee68ba6355804525cefa/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address