FreeBSD-stable-15-amd64-test - Build #64 - Still Failing
Date: Mon, 13 Oct 2025 21:10:47 UTC
FreeBSD-stable-15-amd64-test - Build #64 (3b5ec539beefb82dd3210f51c0e2e0759b20dad8) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/64/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/64/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/64/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
3b5ec539beefb82dd3210f51c0e2e0759b20dad8 by ivy:
Makefile.inc1: Build source packages before sets
The end of the build log:
[...truncated 4.39 MiB...]
epair0b: Ethernet address: 72:ad:dd:45:88:f2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2a:7a:03:fd:d3:bd
epair1b: Ethernet address: d6:ec:79:c7:47:49
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.176s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 7e:b2:c5:c6:12:1d
epair0b: Ethernet address: fe:4d:59:44:33:9f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 72:ff:62:88:e2:cb
epair1b: Ethernet address: b2:b4:2a:b4:62:e5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.146s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: ee:de:94:bd:e7:e4
epair0b: Ethernet address: 26:c6:5e:77:e5:bb
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9e:98:a6:8c:0e:f4
epair1b: Ethernet address: 52:48:0d:84:a1:0a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.146s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 1e:e8:24:48:ab:bd
epair0b: Ethernet address: ae:60:42:1c:1c:91
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: a6:f6:4e:44:82:b4
epair1b: Ethernet address: 66:46:d9:c1:43:7e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.157s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: be:af:82:38:8d:2b
epair0b: Ethernet address: 72:b4:a0:69:fa:ab
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ae:10:72:18:64:f5
epair1b: Ethernet address: 86:51:e0:c7:f3:b1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.178s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 0e:ce:af:75:bc:01
epair0b: Ethernet address: b6:c6:68:dc:07:9c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1a:75:bf:a0:f9:b0
epair1b: Ethernet address: 52:ba:89:1e:97:bc
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.145s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: ba:b1:bb:25:63:7c
epair0b: Ethernet address: 42:13:b1:a0:1e:b4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 96:77:1f:d9:62:44
epair1b: Ethernet address: 3e:b5:eb:49:fe:29
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.146s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: f2:7c:32:5d:12:f8
epair0b: Ethernet address: be:6b:8e:83:77:89
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ca:b0:ba:b0:e6:c2
epair1b: Ethernet address: 52:e6:f6:45:9b:85
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.145s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 6e:71:96:fb:cf:e9
epair0b: Ethernet address: 7a:08:91:4d:48:42
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:8e:79:82:53:2b
epair1b: Ethernet address: ae:94:ae:e5:7c:68
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 36:36:53:dd:13:6d
epair2b: Ethernet address: 8e:6b:5b:71:9c:83
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.207s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 72:f7:53:d8:86:a5
epair0b: Ethernet address: 3a:8f:14:60:b6:fd
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 62:e7:c2:51:fc:26
epair1b: Ethernet address: 2a:92:73:46:a2:76
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ca:24:55:02:ce:8f
epair2b: Ethernet address: 4e:48:3a:0b:ad:80
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.691s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 7e:5e:7f:13:de:2b
epair0b: Ethernet address: 32:e6:42:78:35:6d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: be:93:97:41:9c:4d
epair1b: Ethernet address: 82:81:ae:f1:d0:0f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 4e:cf:5d:49:bc:8c
epair2b: Ethernet address: d6:ca:a1:37:e8:23
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f0e2
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff801a0395796 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 1
time = 1760389831
KDB: stack backtrace:
#0 0xffffffff80bc02ed at kdb_backtrace+0x5d
#1 0xffffffff80b736d6 at vpanic+0x136
#2 0xffffffff80b73593 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051d78 at calltrap+0x8
#5 0xffffffff80d84aa9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc33e8 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b24 at ip6_input+0x484
#14 0xffffffff80cc0c48 at swi_net+0x128
#15 0xffffffff80b2d309 at ithread_loop+0x239
#16 0xffffffff80b2989b at fork_exit+0x7b
#17 0xffffffff81052d9e at fork_trampoline+0xe
Uptime: 1h44m25s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-64' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
x ./run.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins7853234959048921720.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '3b5ec539beefb82dd3210f51c0e2e0759b20dad8', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../3b5ec539beefb82dd3210f51c0e2e0759b20dad8/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address