FreeBSD-stable-15-amd64-test - Build #59 - Still Failing
Date: Sat, 11 Oct 2025 17:35:14 UTC
FreeBSD-stable-15-amd64-test - Build #59 (146b7bb2a111b2d01dc4ce555237a724de27f6cb) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/59/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/59/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/59/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
146b7bb2a111b2d01dc4ce555237a724de27f6cb by markj:
netstat: Fix -ia missing multicast addresses on some interfaces
The end of the build log:
[...truncated 3.89 MiB...]
epair0b: Ethernet address: 7e:34:39:07:54:06
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1e:c2:b7:4d:bd:d4
epair1b: Ethernet address: 92:38:d5:10:91:24
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 9a:31:d0:1d:5a:08
epair0b: Ethernet address: 9e:bc:2a:6a:59:3d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:cc:93:49:14:49
epair1b: Ethernet address: 82:e7:9f:43:07:e9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.141s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 82:fc:f3:a9:46:de
epair0b: Ethernet address: ae:de:f0:9d:bb:13
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e6:0d:88:0f:21:39
epair1b: Ethernet address: 82:7e:13:9f:0c:70
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.141s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 2e:44:ea:31:c3:b7
epair0b: Ethernet address: 9e:2a:14:38:2d:9d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b2:f3:ae:e5:04:de
epair1b: Ethernet address: d6:89:25:68:d2:a6
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.140s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 3a:fb:74:1e:6c:e0
epair0b: Ethernet address: 86:95:21:b4:2a:fb
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 82:6f:df:96:41:83
epair1b: Ethernet address: fe:e7:07:1a:ea:e4
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.140s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: ce:e6:b2:3c:af:da
epair0b: Ethernet address: e6:8d:74:42:74:a4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 96:55:d3:ba:55:96
epair1b: Ethernet address: 36:33:e5:55:f6:ed
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.141s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: e2:d3:eb:d9:4b:a7
epair0b: Ethernet address: c2:16:95:84:9b:29
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 86:9a:98:1b:d8:a2
epair1b: Ethernet address: 7e:b4:3f:e7:bc:f9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.140s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: ee:31:c4:2f:2d:34
epair0b: Ethernet address: 26:ff:43:4f:9a:bc
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8e:c1:3f:fd:bb:0f
epair1b: Ethernet address: c6:2c:37:81:98:a1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.141s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 5e:9d:57:b3:1f:b7
epair0b: Ethernet address: ae:65:ed:ba:f2:7b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: f6:09:16:1a:51:4d
epair1b: Ethernet address: f6:33:c3:13:a5:2a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 3a:2a:e2:73:b0:79
epair2b: Ethernet address: 36:50:05:7b:46:54
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.210s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 2e:7e:08:ff:14:9c
epair0b: Ethernet address: 3a:c2:4a:5e:1f:4e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 76:1d:c4:3d:d9:94
epair1b: Ethernet address: 9a:c9:bd:d1:24:b8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 46:5c:01:6e:f7:68
epair2b: Ethernet address: 16:94:9e:71:46:7e
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.456s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 9e:ba:80:d5:59:eb
epair0b: Ethernet address: 66:8a:61:95:35:ec
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 16:6d:3a:d2:a9:83
epair1b: Ethernet address: 4e:3e:da:16:e5:31
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 82:ec:e8:16:29:10
epair2b: Ethernet address: ee:65:d5:21:1e:19
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f0e2
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff80114ee3296 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 0
time = 1760204098
KDB: stack backtrace:
#0 0xffffffff80bc02ed at kdb_backtrace+0x5d
#1 0xffffffff80b736d6 at vpanic+0x136
#2 0xffffffff80b73593 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051d78 at calltrap+0x8
#5 0xffffffff80d84aa9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc33e8 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b24 at ip6_input+0x484
#14 0xffffffff80cc0c48 at swi_net+0x128
#15 0xffffffff80b2d309 at ithread_loop+0x239
#16 0xffffffff80b2989b at fork_exit+0x7b
#17 0xffffffff81052d9e at fork_trampoline+0xe
Uptime: 1h14m58s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-59' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-zfs-tests.sh
x ./run.sh
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
x ./disable-notyet-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins15446240441109739547.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '146b7bb2a111b2d01dc4ce555237a724de27f6cb', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../146b7bb2a111b2d01dc4ce555237a724de27f6cb/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address