FreeBSD-stable-15-amd64-test - Build #57 - Still Failing
Date: Sat, 11 Oct 2025 11:39:18 UTC
FreeBSD-stable-15-amd64-test - Build #57 (6eb4708a84d773742a7d36e530d06164b3733ba7) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/57/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/57/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/57/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
ac3444a9528eca7beb8a6856e225951a2db46cbf by kib:
kern: replace several EBADF with EINVAL
07debe52b30af92abcee1333874d42f6682b6336 by kib:
pdgetpid(2): switch back returning EBADF for non-procdesc fd
40c8d68772696f8c7eb4c4c385dadf9e004e9f9f by kib:
vm/vm_fault.c: cleanup includes
6bffdfe05b77581cbd92f78892cb30142a4321ab by kib:
vm_fault_busy_sleep(): pass explicit allocflags for vm_page_busy_sleep()
0188344fc3ec94b55b2fa628a5339ed88c25d897 by kib:
vm_fault: add vm_fault_might_be_cow() helper
c8e9bad25a439d8952a0e5b5e42b5b14d8102e25 by kib:
vm_fault: add helper vm_fault_can_cow_rename()
650a9a12c06178dd8623b57579f250ec26db4bcc by kib:
vm_fault: try to only share-busy page for soft faults
27d5df7c26c24ca63996ae1582dcbe7fbc167448 by kib:
vm_fault: assert that first_m is xbusy
6506630a28bcf79e6c6e9cbb573a1b1e165c800f by kib:
vm_fault_busy_sleep(): update comment after addition of allocflags arg
6eb4708a84d773742a7d36e530d06164b3733ba7 by kib:
kern_exit.c: do not leak reaper bitmap busy bits
The end of the build log:
[...truncated 4.39 MiB...]
epair0b: Ethernet address: 6a:05:91:7f:6a:c9
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: de:20:08:98:83:6f
epair1b: Ethernet address: be:2d:b0:e2:15:2e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.170s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: ae:cd:31:ba:4f:f0
epair0b: Ethernet address: 52:03:74:05:4b:5d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 46:d7:f2:78:51:22
epair1b: Ethernet address: 56:28:c1:1d:5f:2f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: ae:f7:e3:e2:dc:c1
epair0b: Ethernet address: 86:0e:40:70:6e:df
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 96:5e:9b:87:70:2a
epair1b: Ethernet address: 82:26:6e:55:7b:30
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 4a:ab:2a:c7:a9:74
epair0b: Ethernet address: 7e:ca:52:98:ac:48
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8a:99:10:57:3a:27
epair1b: Ethernet address: 12:75:dc:fe:6a:95
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 42:3d:e5:78:0c:a4
epair0b: Ethernet address: ae:1d:83:1f:77:1e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 7e:c6:53:40:dd:ee
epair1b: Ethernet address: 72:56:6e:74:15:ae
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 06:0b:31:99:ff:c9
epair0b: Ethernet address: 32:f4:11:3a:31:cd
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 3a:db:c2:1f:7f:ce
epair1b: Ethernet address: ae:ab:76:ae:14:8f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 2a:58:3e:f7:93:ba
epair0b: Ethernet address: 8e:3d:8d:55:95:82
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6a:a8:5f:05:6d:53
epair1b: Ethernet address: 0e:f1:68:7e:ce:be
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.162s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: be:9f:3e:bb:cf:79
epair0b: Ethernet address: e6:24:b8:40:e8:b1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 22:8d:0c:8d:ea:65
epair1b: Ethernet address: 8e:9d:c2:69:49:96
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 2e:18:f7:22:42:aa
epair0b: Ethernet address: 3e:9d:6f:cd:86:75
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ce:63:69:b8:0b:03
epair1b: Ethernet address: 7a:89:36:13:7c:13
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 82:72:10:43:52:19
epair2b: Ethernet address: e6:00:4a:23:0d:32
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.315s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 3a:19:4a:fe:1f:0e
epair0b: Ethernet address: f6:a7:62:42:e8:6f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ce:50:71:b5:8f:f6
epair1b: Ethernet address: 92:90:5d:65:5a:96
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 96:f5:d6:c1:c1:5a
epair2b: Ethernet address: 4a:19:56:51:bf:4f
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.730s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 96:ef:56:3a:66:57
epair0b: Ethernet address: e2:5f:dd:60:84:45
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6e:ed:eb:5a:2d:41
epair1b: Ethernet address: 72:e9:dc:62:51:6a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 62:80:97:2b:cc:fb
epair2b: Ethernet address: a2:8f:11:80:56:d1
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f0e2
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff802314e9796 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 0
time = 1760182742
KDB: stack backtrace:
#0 0xffffffff80bc02ed at kdb_backtrace+0x5d
#1 0xffffffff80b736d6 at vpanic+0x136
#2 0xffffffff80b73593 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051d78 at calltrap+0x8
#5 0xffffffff80d84aa9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc33e8 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b24 at ip6_input+0x484
#14 0xffffffff80cc0c48 at swi_net+0x128
#15 0xffffffff80b2d309 at ithread_loop+0x239
#16 0xffffffff80b2989b at fork_exit+0x7b
#17 0xffffffff81052d9e at fork_trampoline+0xe
Uptime: 1h46m33s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-57' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./disable-notyet-tests.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins7836271376240640475.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '6eb4708a84d773742a7d36e530d06164b3733ba7', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../6eb4708a84d773742a7d36e530d06164b3733ba7/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address