FreeBSD-stable-15-amd64-test - Build #53 - Still Failing
Date: Sat, 11 Oct 2025 05:00:35 UTC
FreeBSD-stable-15-amd64-test - Build #53 (2a6c17544e00b2f1a081bab501c079e5d70aa74c) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/53/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/53/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/53/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
64b51d35cef5bc47c1a2c41a495ff6ba7d46a054 by jhb:
Fix possible out of bounds read in armv8_crc32c
ec598fa915ee61ca56f89d4db99ac001c4ccdf4d by jhb:
ahci: Use pci_msix_*_bar instead of reading config registers directly
fb939e88ba192fc75ebcbc863bcf1523e65a756b by jhb:
ahci: Don't fail attach if the MSI-X BARs cannot be allocated
2a6c17544e00b2f1a081bab501c079e5d70aa74c by christos:
virtual_oss: Clean up rcorder
The end of the build log:
[...truncated 3.96 MiB...]
epair0b: Ethernet address: b2:78:7f:75:66:65
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1a:63:20:98:76:d1
epair1b: Ethernet address: 4e:d4:d7:25:4a:86
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.159s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: f6:b2:8d:62:ce:27
epair0b: Ethernet address: 7a:13:c9:47:64:33
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5e:ca:2d:d3:17:cd
epair1b: Ethernet address: ce:a3:05:d3:fd:b3
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.140s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: a2:e3:41:87:4f:6b
epair0b: Ethernet address: 8e:26:ef:e8:2a:a5
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 0e:e6:b2:07:19:39
epair1b: Ethernet address: c2:6e:ab:f6:84:84
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.150s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: a2:e4:8b:46:f0:99
epair0b: Ethernet address: ee:b8:f7:c6:a7:b8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: fe:09:18:43:f4:e2
epair1b: Ethernet address: 92:f3:63:6a:da:3c
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.141s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 96:f1:68:34:fa:d7
epair0b: Ethernet address: d2:5c:22:cb:1a:c4
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 56:a6:c5:af:c8:4e
epair1b: Ethernet address: f2:b5:5b:b1:6b:79
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.151s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: b6:24:f0:bd:04:dd
epair0b: Ethernet address: 6a:80:d5:61:80:e8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 82:be:1b:e9:85:92
epair1b: Ethernet address: 16:fe:b9:6a:d3:06
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.151s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 5e:5b:25:30:e9:af
epair0b: Ethernet address: 46:5f:e6:a5:96:a2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c6:03:b5:30:31:68
epair1b: Ethernet address: 2a:06:0e:bf:61:84
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.149s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: b6:da:dd:c2:5d:62
epair0b: Ethernet address: ca:39:08:9e:3e:06
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: f2:33:62:51:61:e9
epair1b: Ethernet address: 1e:31:b3:ed:55:83
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.140s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: be:37:24:17:b1:2d
epair0b: Ethernet address: 06:a2:0b:ee:82:35
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: fa:ac:7b:7a:f6:4c
epair1b: Ethernet address: 32:30:40:ff:c1:b9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 82:dc:2f:25:7b:18
epair2b: Ethernet address: e2:e8:e4:c1:33:27
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.220s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 9a:dc:6a:2c:3a:e8
epair0b: Ethernet address: 0e:cd:6e:f9:8b:1e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: f2:36:a6:d8:82:de
epair1b: Ethernet address: 62:7d:ff:12:6b:b1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: ae:8f:2b:6d:58:da
epair2b: Ethernet address: 66:3b:a1:b8:d9:39
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.729s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 5a:fa:48:1d:3c:40
epair0b: Ethernet address: 86:a9:5c:8e:42:4d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 96:a1:c1:94:06:a9
epair1b: Ethernet address: 6e:20:7e:fe:bb:47
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: be:bc:2c:74:97:74
epair2b: Ethernet address: f2:09:d4:00:95:62
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f0a2
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff80193d01296 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 0
time = 1760158819
KDB: stack backtrace:
#0 0xffffffff80bc02ad at kdb_backtrace+0x5d
#1 0xffffffff80b73696 at vpanic+0x136
#2 0xffffffff80b73553 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051af8 at calltrap+0x8
#5 0xffffffff80d84a69 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc33a8 at pfil_mbuf_in+0x38
#13 0xffffffff80d92ae4 at ip6_input+0x484
#14 0xffffffff80cc0c08 at swi_net+0x128
#15 0xffffffff80b2d2c9 at ithread_loop+0x239
#16 0xffffffff80b2985b at fork_exit+0x7b
#17 0xffffffff81052b1e at fork_trampoline+0xe
Uptime: 1h23m14s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-53' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./run.sh
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins16099133058573023778.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '2a6c17544e00b2f1a081bab501c079e5d70aa74c', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../2a6c17544e00b2f1a081bab501c079e5d70aa74c/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address