FreeBSD-main-amd64-test - Build #26946 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26947 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26945 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Fri, 10 Oct 2025 06:41:10 UTC
FreeBSD-main-amd64-test - Build #26946 (e9f7c3de111b9dda23e1763e030688d78a71d8ff) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26946/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26946/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26946/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

75eb6846269bb9bec1eaf4f0ad93d7525715b550 by olce:
nfsuserd: Fix OOB access on membership of too many groups, take 2

1fdae2e33fdc751bc2ec74c81fcde14323e4e965 by gshapiro:
Be explicit that newaliases for sendmail

349da4dbff722a58affd13d84729b1d399b41fb3 by emaste:
libcasper: explicit cast in cap_fileargs header



The end of the build log:

[...truncated 3.91 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: e2:98:20:52:78:a5
epair1b: Ethernet address: 56:bd:c8:67:3c:fa
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.284s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: 22:7a:88:c3:94:c8
epair0b: Ethernet address: 4a:22:28:c2:7c:af
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 0e:af:a5:40:df:67
epair1b: Ethernet address: f2:40:b3:81:24:9f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.274s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: 0a:9e:67:fc:a8:ec
epair0b: Ethernet address: 22:e8:1f:19:44:f6
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 06:f1:27:f7:7d:a5
epair1b: Ethernet address: ee:33:33:55:49:65
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.274s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: a2:ef:ee:52:4d:c5
epair0b: Ethernet address: b2:29:c6:02:27:e9
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:a4:40:31:59:c1
epair1b: Ethernet address: a2:8a:4a:7b:50:ba
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.274s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: ca:4b:bd:2e:05:e5
epair0b: Ethernet address: f2:71:5b:af:ae:41
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ca:88:d1:42:a8:91
epair1b: Ethernet address: 0e:59:71:06:df:5b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.274s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: 46:db:6d:a4:02:ac
epair0b: Ethernet address: 46:e2:1e:d1:25:24
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:a6:75:dd:6c:45
epair1b: Ethernet address: 5e:e9:f2:49:a0:19
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.286s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: 1e:f1:41:dd:e0:ac
epair0b: Ethernet address: 02:47:1b:64:22:47
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: da:1d:dc:98:9f:71
epair1b: Ethernet address: e2:bb:8d:d7:7d:1f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.274s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: 0e:84:9f:d4:dd:17
epair0b: Ethernet address: 3e:3d:64:6f:44:a7
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: de:fd:db:98:17:a9
epair1b: Ethernet address: fa:19:a3:89:ff:1e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.274s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: b2:66:90:4e:59:fe
epair0b: Ethernet address: 36:4d:73:73:df:26
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:b6:4a:9b:0e:52
epair1b: Ethernet address: 86:4e:66:c2:48:d8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: aa:12:17:b9:2b:93
epair2b: Ethernet address: 66:d7:16:ee:ff:b9
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.395s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 46:09:71:c0:db:f0
epair0b: Ethernet address: 46:eb:b2:cd:cf:37
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:28:83:7a:c2:26
epair1b: Ethernet address: 0a:6f:e2:c0:e9:79
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 62:a6:a1:f2:af:ea
epair2b: Ethernet address: 32:0f:e6:22:25:62
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [6.283s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: 12:b6:19:8d:91:c6
epair0b: Ethernet address: c2:9b:fb:c1:60:ac
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 72:e4:0a:0b:ff:19
epair1b: Ethernet address: be:64:94:ca:56:7b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: de:15:a1:f1:ee:5f
epair2b: Ethernet address: 62:4e:0d:d5:8f:c4
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 1
time = 1760078470
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d1c25c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b003
ucr3         = 0xffffffffffffffff
scr3         = 0x42b3fe04
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff8015b090140
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h20m26s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26946' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./disable-dtrace-tests.sh
x ./run.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./run-kyua.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins16994591898508011927.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'e9f7c3de111b9dda23e1763e030688d78a71d8ff', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../e9f7c3de111b9dda23e1763e030688d78a71d8ff/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address