FreeBSD-stable-15-amd64-test - Build #42 - Still Failing
Date: Fri, 10 Oct 2025 06:31:05 UTC
FreeBSD-stable-15-amd64-test - Build #42 (94f08f6a84e3e57692c1d244d234007b5a9f5cc5) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/42/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/42/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/42/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
23494c4987b4ff7411e38ec0dd027014f337d4d7 by olce:
getgrouplist.3: Insist on the value returned in 'ngroups'; Minor changes
baf1210fa2e57b587193e81ff57fbce13f315cba by olce:
initgroups.3: Clarify that ENOMEM is a possible value for 'errno'
ef40e02a8d788f1e96f4f89c0b96fb50a4aad8e7 by olce:
nfsuserd: Fix OOB access on membership of too many groups
94f08f6a84e3e57692c1d244d234007b5a9f5cc5 by olce:
nfsuserd: Fix OOB access on membership of too many groups, take 2
The end of the build log:
[...truncated 10.41 KiB...]
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-ALPHA5 n280618-94f08f6a84e3 GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
SRAT: Ignoring memory at addr 0xff000000
VT: init without driver.
CPU: Intel(R) Xeon(R) Silver 4216 CPU @ 2.10GHz (2100.00-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x50657 Family=0x6 Model=0x55 Stepping=7
Features=0x9f83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS,HTT,PBE>
Features2=0xfede7a17<SSE3,PCLMULQDQ,DTES64,DS_CPL,SSSE3,SDBG,FMA,CX16,xTPR,PCID,DCA,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0xd0170fb9<FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,AVX512F,AVX512DQ,RDSEED,SMAP,AVX512CD,AVX512BW,AVX512VL>
Structured Extended Features3=0x400<MD_CLEAR>
XSAVE Features=0x1<XSAVEOPT>
TSC: P-state invariant
Hypervisor: Origin = "bhyve bhyve "
real memory = 9663676416 (9216 MB)
avail memory = 8316211200 (7930 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BHYVE BVAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
Security policy loaded: TrustedBSD MAC/BSD Extended (mac_bsdextended)
ioapic0 <Version 1.1> irqs 0-31
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
smbios0: <System Management BIOS> at iomem 0xf1000-0xf101e
smbios0: Entry point: v2.1 (32-bit), Version: 2.6, BCD Revision: 2.6
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <BHYVE BVXSDT >
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 16777216 Hz quality 950
Event timer "HPET" frequency 16777216 Hz quality 550
Event timer "HPET1" frequency 16777216 Hz quality 450
Event timer "HPET2" frequency 16777216 Hz quality 450
Event timer "HPET3" frequency 16777216 Hz quality 450
Event timer "HPET4" frequency 16777216 Hz quality 450
Event timer "HPET5" frequency 16777216 Hz quality 450
Event timer "HPET6" frequency 16777216 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
virtio_pci0: <VirtIO PCI (legacy) Block adapter> port 0x2000-0x207f mem 0xc0000000-0xc0001fff irq 16 at device 2.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci0
vtblk0: 9216MB (18874557 512 byte sectors)
virtio_pci1: <VirtIO PCI (legacy) Block adapter> port 0x2080-0x20ff mem 0xc0002000-0xc0003fff irq 17 at device 3.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci1
vtblk1: 512MB (1048576 512 byte sectors)
ahci0: <Intel ICH8 AHCI SATA controller> mem 0xc0004000-0xc0005fff irq 18 at device 4.0 on pci0
ahci0: AHCI v1.30 with 32 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
virtio_pci2: <VirtIO PCI (legacy) Block adapter> port 0x2100-0x217f mem 0xc0006000-0xc0007fff irq 19 at device 5.0 on pci0
vtblk2: <VirtIO Block Adapter> on virtio_pci2
vtblk2: 128MB (262144 512 byte sectors)
virtio_pci3: <VirtIO PCI (legacy) Block adapter> port 0x2180-0x21ff mem 0xc0008000-0xc0009fff irq 20 at device 6.0 on pci0
vtblk3: <VirtIO Block Adapter> on virtio_pci3
vtblk3: 128MB (262144 512 byte sectors)
virtio_pci4: <VirtIO PCI (legacy) Block adapter> port 0x2200-0x227f mem 0xc000a000-0xc000bfff irq 21 at device 7.0 on pci0
vtblk4: <VirtIO Block Adapter> on virtio_pci4
vtblk4: 128MB (262144 512 byte sectors)
virtio_pci5: <VirtIO PCI (legacy) Block adapter> port 0x2280-0x22ff mem 0xc000c000-0xc000dfff irq 22 at device 8.0 on pci0
vtblk5: <VirtIO Block Adapter> on virtio_pci5
vtblk5: 128MB (262144 512 byte sectors)
virtio_pci6: <VirtIO PCI (legacy) Block adapter> port 0x2300-0x237f mem 0xc000e000-0xc000ffff irq 23 at device 9.0 on pci0
vtblk6: <VirtIO Block Adapter> on virtio_pci6
vtblk6: 128MB (262144 512 byte sectors)
vmgenc0: <VM Generation Counter> on acpi0
random: registering fast source VM Generation ID
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
Unhandled ps2 mouse command 0xe1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model Generic PS/2 mouse, device ID 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 4 on acpi0
uart3: <16550 or compatible> port 0x2e8-0x2ef irq 3 on acpi0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0
Timecounter "TSC" frequency 2100023334 Hz quality 1000
Timecounters tick every 10.000 msec
usb_needs_explore_all: no devclass
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <BHYVE SATA DISK 001> ACS-2 ATA SATA 3.x device
ada0: Serial Number BHYVE-AC61-4EA8-6E92
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 128MB (262144 512 byte sectors)
Setting hostuuid: d4fc3106-6b5e-4b16-b7a7-7199e881a716.
Setting hostid: 0x0dab86c2.
Starting file system checks:
/dev/gpt/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/gpt/rootfs: clean, 1101990 free (6 frags, 137748 blocks, 0.0% fragmentation)
Mounting local filesystems:.
Loading kernel modules: accf_data accf_dns accf_http accf_tls blake2 carp cfiscsi cryptodev dummymbuf dummynet fusefs if_bridge if_enc if_epair if_ovpn if_stf ipdivert ipfw ipfw_nat ipl ipsec mac_bsdextended mac_ipacl mac_portacl mqueuefs pf pflog pflow pfsync sctp snd_dummy tarfs tcpmd5
blaketwo0: <Blake2>
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
IP Filter: v5.1.2 initialized. Default = pass all, Logging = enabled
Security policy loaded: TrustedBSD MAC/ipacl (mac_ipacl)
Security policy loaded: TrustedBSD MAC/portacl (mac_portacl)
pcm0: <Dummy Audio Device>
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/perl5/5.42/mach/CORE
32-bit compatibility ldconfig path: /usr/lib32
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up harvesting: PURE_VMGENID,PURE_RDRAND,RANDOMDEV,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
Starting Network: lo0 enc0.
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=0 metric 0 mtu 1536
options=0
groups: enc
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting Network: enc0.
enc0: flags=0 metric 0 mtu 1536
options=0
groups: enc
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
route: message indicates error: File exists
add host 127.0.0.1: gateway lo0 fib 1,2
add host 127.0.0.1: gateway lo0 fib 0: route already in table
route: message indicates error: File exists
add host ::1: gateway lo0 fib 1,2
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1 fib 0,1,2
add net ff02::: gateway ::1 fib 0,1,2
add net ::ffff:0.0.0.0: gateway ::1 fib 0,1,2
add net ::0.0.0.0: gateway ::1 fib 0,1,2
Updating motd:.
Updating /var/run/os-release done.
Clearing /tmp (X related).
Starting auditd.
2025-10-10T00:34:00.296593+00:00 - auditd 1430 - - starting...
2025-10-10T00:34:00.297624+00:00 - auditd 1431 - - Auditing disabled
2025-10-10T00:34:00.298477+00:00 - auditd 1431 - - Configured trail files distribution.
2025-10-10T00:34:00.299626+00:00 - auditd 1431 - - Auditing enabled
2025-10-10T00:34:00.300303+00:00 - auditd 1431 - - New audit file is /var/audit/20251010003400.not_terminated
2025-10-10T00:34:00.303274+00:00 - auditd 1431 - - Registered 677 event to class mappings.
2025-10-10T00:34:00.304095+00:00 - auditd 1431 - - Registered non-attributable event mask.
2025-10-10T00:34:00.304895+00:00 - auditd 1431 - - Set audit policy in kernel.
2025-10-10T00:34:00.305620+00:00 - auditd 1431 - - Set audit trail size in kernel.
2025-10-10T00:34:00.306355+00:00 - auditd 1431 - - Set audit trail queue in kernel.
2025-10-10T00:34:00.307092+00:00 - auditd 1431 - - Set audit trail min free percent in kernel.
2025-10-10T00:34:00.307923+00:00 - auditd 1431 - - audit_control(5) may be missing 'host:' field
2025-10-10T00:34:00.308767+00:00 - auditd 1431 - - Audit controls init successful
Mounting late filesystems:.
Fri Oct 10 00:34:00 UTC 2025
FreeBSD/amd64 (Amnesiac) (ttyu0)
login: Trigger sent.
2025-10-10T06:30:56.086882+00:00 - auditd 1431 - - Got close and die trigger
Waiting for PIDS: 14312025-10-10T06:30:56.087885+00:00 - auditd 1431 - - Auditing disabled
2025-10-10T06:30:56.097705+00:00 - auditd 1431 - - renamed /var/audit/20251010003400.not_terminated to /var/audit/20251010003400.20251010063056
2025-10-10T06:30:56.105985+00:00 - auditd 1431 - - Finished
2025-10-10T06:30:56.106172+00:00 - auditd 1431 - - auditd exiting.
.
Stopping devd.
Waiting for PIDS: 1129.
Writing entropy file: .
Writing early boot entropy file: .
.
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 done
All buffers synced.
Uptime: 5h57m1s
acpi0: Powering system off
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-42' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./run.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins10552456692575201809.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '94f08f6a84e3e57692c1d244d234007b5a9f5cc5', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../94f08f6a84e3e57692c1d244d234007b5a9f5cc5/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address