FreeBSD-main-amd64-test - Build #26944 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26945 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26943 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Fri, 10 Oct 2025 03:30:39 UTC
FreeBSD-main-amd64-test - Build #26944 (a28b44ddc3484fcf02420543a223053404a2bfce) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26944/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26944/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26944/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

c36a44e1cdab1c67a98132676818f473cc4e5c03 by olce:
initgroups.3: Clarify that ENOMEM is a possible value for 'errno'

a28b44ddc3484fcf02420543a223053404a2bfce by emaste:
zfs: Revert "tunables: remove legacy FreeBSD aliases"



The end of the build log:

[...truncated 4.39 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 22:a0:50:0a:98:e1
epair1b: Ethernet address: 6a:b8:a8:ee:b9:f9
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.354s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: da:11:fa:45:58:99
epair0b: Ethernet address: ce:c9:ed:76:3e:31
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b2:f1:cb:af:68:4b
epair1b: Ethernet address: 16:18:15:e8:a2:21
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.233s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: 2a:b9:5a:72:4b:7a
epair0b: Ethernet address: 8e:9a:3f:5a:5a:d0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 3e:e7:c0:9e:46:33
epair1b: Ethernet address: a2:79:6e:6f:8b:d0
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.246s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: 6a:44:59:ae:78:3e
epair0b: Ethernet address: 8e:61:0b:0f:aa:60
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:53:8c:cf:3c:8c
epair1b: Ethernet address: ea:24:ef:5d:94:b0
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.233s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: 5e:16:c0:7d:08:42
epair0b: Ethernet address: 1e:b3:af:20:35:00
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1e:77:4a:bc:46:11
epair1b: Ethernet address: ea:bf:ad:5c:6c:d1
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.234s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: f2:05:10:33:ff:7a
epair0b: Ethernet address: f6:c7:f9:2b:5d:4d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 5a:c9:87:f1:59:f0
epair1b: Ethernet address: 86:01:f3:75:b9:80
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.245s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: 9a:6d:0c:53:f1:ef
epair0b: Ethernet address: e6:59:ae:14:41:85
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:74:b0:79:09:39
epair1b: Ethernet address: 36:e9:ff:a7:31:90
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.234s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: 4e:a3:4b:16:5f:99
epair0b: Ethernet address: a2:99:9d:2c:d7:57
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 82:41:fd:ff:3a:c8
epair1b: Ethernet address: 46:cc:86:fe:c9:37
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.274s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: 2e:a7:90:a4:bf:e4
epair0b: Ethernet address: 22:ff:60:aa:55:2d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: de:88:9a:84:e9:db
epair1b: Ethernet address: da:60:16:19:c8:ad
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: a6:03:08:30:ec:d0
epair2b: Ethernet address: 72:ab:41:90:20:7e
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.345s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 6e:ce:18:a5:98:97
epair0b: Ethernet address: 16:38:a9:29:41:8f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: a6:46:be:10:8c:cc
epair1b: Ethernet address: 62:fc:94:06:47:89
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 5a:72:38:55:fb:89
epair2b: Ethernet address: 62:62:14:78:55:a5
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.206s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: 0e:4e:3a:1a:c7:fd
epair0b: Ethernet address: 86:d2:d5:8c:1a:3a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 12:2b:b2:2f:14:d5
epair1b: Ethernet address: 8e:8c:3c:af:bd:e6
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 46:9a:77:74:bd:a4
epair2b: Ethernet address: b6:ed:b8:06:ae:6a
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 0
time = 1760067038
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0xa075c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b780: tid 100003 "idle: cpu0"
self         = 0xffffffff82610000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82610384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x14723398c
gs32p        = 0xffffffff82610404
ldt          = 0xffffffff82610444
tss          = 0xffffffff82610434
curvnet      = 0xfffff8000323a240
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h46m7s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26944' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./run.sh
x ./disable-notyet-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins14719616652487626257.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'a28b44ddc3484fcf02420543a223053404a2bfce', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../a28b44ddc3484fcf02420543a223053404a2bfce/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address