FreeBSD-stable-15-amd64-test - Build #36 - Still Failing
Date: Thu, 09 Oct 2025 14:39:58 UTC
FreeBSD-stable-15-amd64-test - Build #36 (29615626407279b9c995ffe9aa0f577de4752634) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/36/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/36/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/36/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
df70662f4704f432b00b5a8b4acd7f12a2deffa3 by des:
rc: Teach netwait to wait for DAD
b2f1fa13e98f32207ba1f2b4a8135d3a2747fab3 by des:
fts: Document thread (un)safety
835f8ac7d06f1aa5227db1043db142246e552d56 by des:
tail: Tweak follow_rename test case
12304ec662397ef5291c67d0a3c15eef1f108195 by des:
fts: Remove a few stray blank lines
ef8420744e72d4ea28fc0c4298bd41b45ad4d09f by des:
cp: Simplify sameness checks
23b82b5b44735c5d8d09e51e84e5ad4c652aa495 by des:
ln: Simplify sameness checks
6a9e0fdf371392a887aacb8a8c401481b47e5a5e by des:
tarfs: Simplify sameness checks
86eecff20db7e78b2da36c2e0be821bd66cdf167 by des:
rcorder: Fix grammar in warning about loops
29615626407279b9c995ffe9aa0f577de4752634 by des:
nvme: Tweak completion timeout loop
The end of the build log:
[...truncated 3.94 MiB...]
epair0b: Ethernet address: 7e:e9:27:2f:41:05
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9e:de:6b:7f:97:c8
epair1b: Ethernet address: e2:be:96:95:b9:d5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.147s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 76:c9:09:89:ac:6e
epair0b: Ethernet address: 42:47:29:62:f8:0e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:bc:09:ef:81:a1
epair1b: Ethernet address: 22:ff:df:7b:34:b0
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.138s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 06:f9:5d:67:f0:67
epair0b: Ethernet address: 4e:78:c0:42:da:7d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: f6:16:71:d7:0e:58
epair1b: Ethernet address: 1a:72:eb:02:86:f8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.148s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 7a:bb:6a:96:4a:b9
epair0b: Ethernet address: 16:76:fd:9a:53:11
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 92:39:b0:a3:e0:9b
epair1b: Ethernet address: d6:d6:98:26:1f:57
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.137s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: e6:54:03:fd:68:e0
epair0b: Ethernet address: f6:a2:e9:d2:f7:ba
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b2:d6:cf:29:64:9e
epair1b: Ethernet address: 02:4e:b1:2b:e5:9d
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.138s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 4e:b9:1b:1c:0a:59
epair0b: Ethernet address: fa:f2:50:66:26:be
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b6:04:6c:e7:25:aa
epair1b: Ethernet address: 82:89:f1:65:1a:50
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.146s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 26:46:86:a0:6c:09
epair0b: Ethernet address: a2:06:3a:1e:5a:21
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: aa:33:2b:6e:de:c7
epair1b: Ethernet address: 5a:9d:b2:23:3f:42
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.137s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: b6:bb:a9:12:0a:90
epair0b: Ethernet address: fa:18:7b:9c:cd:13
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8a:98:15:17:ec:ec
epair1b: Ethernet address: fa:81:3a:79:71:9b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.139s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 92:36:c8:f8:6f:53
epair0b: Ethernet address: a2:e5:18:3a:bb:39
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: de:69:b4:e8:b2:cf
epair1b: Ethernet address: 2a:73:4c:7f:4c:87
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 2a:ed:01:eb:db:ea
epair2b: Ethernet address: 96:d9:55:55:9d:13
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.227s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 0e:8f:92:05:d3:8c
epair0b: Ethernet address: e6:63:d6:bd:01:44
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 92:08:7e:fc:0f:ef
epair1b: Ethernet address: 76:79:c1:91:0c:c5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: fe:ba:3c:e2:8b:e2
epair2b: Ethernet address: 0e:9e:d8:05:6b:d4
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.703s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: ce:aa:37:73:96:f6
epair0b: Ethernet address: 3e:ab:18:94:cd:94
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: e2:81:f6:21:9f:d3
epair1b: Ethernet address: 76:22:63:27:a7:b2
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: e2:fc:cc:9e:76:1d
epair2b: Ethernet address: 96:13:ad:60:95:60
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f132
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff800677ca996 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 0
time = 1760020782
KDB: stack backtrace:
#0 0xffffffff80bc033d at kdb_backtrace+0x5d
#1 0xffffffff80b73726 at vpanic+0x136
#2 0xffffffff80b735e3 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051a58 at calltrap+0x8
#5 0xffffffff80d84ae9 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc3438 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b64 at ip6_input+0x484
#14 0xffffffff80cc0c98 at swi_net+0x128
#15 0xffffffff80b2d359 at ithread_loop+0x239
#16 0xffffffff80b298eb at fork_exit+0x7b
#17 0xffffffff81052a7e at fork_trampoline+0xe
Uptime: 1h17m43s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-36' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins1039790421249985547.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '29615626407279b9c995ffe9aa0f577de4752634', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../29615626407279b9c995ffe9aa0f577de4752634/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address