FreeBSD-main-amd64-test - Build #26937 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26938 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26936 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 09 Oct 2025 14:01:07 UTC
FreeBSD-main-amd64-test - Build #26937 (d5d1e05efbedf67f1ef8e8428f9107401e369a0b) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26937/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26937/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26937/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

ab0329e6eb457590e55d54267ef67453e11bc7cd by bcr:
jail.8: Mention that vnet.interface can have multiple addresses

e41e099ef199de096abd9a93289bdacfd83a5f48 by ziaee:
release/RPI: Add RPI Zero 2W device tree blob dtb

de3faa85d8f99d260cbfa6242dd8e4ece693e4f8 by des:
local-unbound-setup: Set so-sndbuf to 0

20a8d06034791c8bb2cc733e4fe4fa1bc60273ec by ziaee:
aacraid.4: Improve HARDWARE introductory sentance

d5d1e05efbedf67f1ef8e8428f9107401e369a0b by ziaee:
aacraid.4: Fix document description + tag SPDX



The end of the build log:

[...truncated 4.39 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 6e:6f:e2:b1:0c:cb
epair1b: Ethernet address: a2:c0:7a:d2:03:54
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.269s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: e6:ff:69:83:b8:11
epair0b: Ethernet address: f2:a2:45:2b:fe:0d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: a6:e1:80:00:de:d4
epair1b: Ethernet address: 8a:2e:dd:4d:6d:3e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.233s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: 3e:38:36:33:18:2f
epair0b: Ethernet address: 7a:4a:e5:b8:ca:c2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 2e:70:7b:e7:5a:e3
epair1b: Ethernet address: 56:99:e1:f4:14:16
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.235s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: ce:b4:4f:6b:b7:4d
epair0b: Ethernet address: 32:2f:53:b5:52:58
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c6:37:6a:53:60:48
epair1b: Ethernet address: 0a:8e:b4:7f:d6:05
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.235s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: 96:0d:9b:b1:26:b6
epair0b: Ethernet address: ca:91:53:df:71:9d
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 62:5a:47:40:68:23
epair1b: Ethernet address: 26:57:6e:87:78:8c
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.235s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: 8e:02:8c:bf:ad:5a
epair0b: Ethernet address: 0a:28:3c:85:1d:42
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6e:05:d5:d8:09:17
epair1b: Ethernet address: f6:a6:79:13:0f:ba
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.266s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: 8e:80:82:41:cb:11
epair0b: Ethernet address: 36:ad:1b:39:6b:63
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 7a:fd:e1:52:86:dd
epair1b: Ethernet address: ca:1e:10:49:40:f5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.245s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: 96:b0:15:2a:95:01
epair0b: Ethernet address: 12:6c:29:b3:90:8c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 16:08:cd:85:b5:c4
epair1b: Ethernet address: 16:aa:8d:50:82:6c
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.246s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: 2e:b7:ac:9c:35:53
epair0b: Ethernet address: 9e:f2:c0:49:24:35
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: de:c7:c5:41:12:02
epair1b: Ethernet address: aa:44:89:49:70:ce
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 26:15:ca:6f:86:87
epair2b: Ethernet address: a6:7b:36:49:a5:2d
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.407s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 2e:da:03:48:7c:28
epair0b: Ethernet address: 3e:16:cd:da:a5:8b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ee:9b:a0:47:83:25
epair1b: Ethernet address: 0a:f5:25:5d:45:e7
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: de:4e:8a:b9:3b:80
epair2b: Ethernet address: 86:d4:62:d4:35:ee
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.249s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: b2:5f:11:bb:36:7b
epair0b: Ethernet address: ca:ff:88:8b:64:bb
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 6a:6f:3a:a2:05:2e
epair1b: Ethernet address: 16:c6:83:be:24:69
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 2a:07:42:62:78:0f
epair2b: Ethernet address: 92:96:c0:ed:2c:f9
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 1
time = 1760018448
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe008d1c25c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b000: tid 100004 "idle: cpu1"
self         = 0xffffffff82611000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82611384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x108111bed
gs32p        = 0xffffffff82611404
ldt          = 0xffffffff82611444
tss          = 0xffffffff82611434
curvnet      = 0xfffff8000323b9c0
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h46m3s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26937' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins6284990751110615141.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'd5d1e05efbedf67f1ef8e8428f9107401e369a0b', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../d5d1e05efbedf67f1ef8e8428f9107401e369a0b/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address