FreeBSD-main-amd64-test - Build #26930 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26931 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26929 - Still Failing"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Thu, 09 Oct 2025 02:03:56 UTC
FreeBSD-main-amd64-test - Build #26930 (c8f9a9abd8000a8514e0beee99ffcf48d05ce47b) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26930/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26930/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26930/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

c8f9a9abd8000a8514e0beee99ffcf48d05ce47b by ivy:
generate-set-ucl.lua: Add missing copyright header



The end of the build log:

[...truncated 3.90 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 92:0a:96:3c:b4:9c
epair1b: Ethernet address: 86:3f:a7:15:0d:f0
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.249s]
sys/netpfil/pf/nat64:tcp_in_floating  ->  epair0a: Ethernet address: ba:b9:9a:16:9c:fb
epair0b: Ethernet address: 0e:25:e5:36:67:71
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 36:c0:7b:47:a5:ac
epair1b: Ethernet address: b6:18:19:23:a9:28
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.248s]
sys/netpfil/pf/nat64:tcp_in_if_bound  ->  epair0a: Ethernet address: b6:07:30:1e:73:8a
epair0b: Ethernet address: 4a:7f:6f:40:9d:f0
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:f6:3c:2f:87:3b
epair1b: Ethernet address: 4a:ab:d8:cc:ee:6e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.248s]
sys/netpfil/pf/nat64:tcp_out_floating  ->  epair0a: Ethernet address: ea:04:cd:3e:db:2f
epair0b: Ethernet address: de:ec:a5:35:5f:14
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 66:29:b2:0a:f2:38
epair1b: Ethernet address: fa:32:6a:72:eb:ff
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.339s]
sys/netpfil/pf/nat64:tcp_out_if_bound  ->  epair0a: Ethernet address: ce:4e:92:b8:9e:e7
epair0b: Ethernet address: 62:0b:eb:36:f8:d5
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ee:9a:ee:75:f3:76
epair1b: Ethernet address: a2:75:43:5b:cd:73
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.238s]
sys/netpfil/pf/nat64:tos  ->  epair0a: Ethernet address: e6:26:05:75:52:25
epair0b: Ethernet address: 6a:3a:47:72:8c:64
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4a:da:6b:06:e1:5b
epair1b: Ethernet address: d2:04:e9:f1:13:44
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.238s]
sys/netpfil/pf/nat64:udp_in  ->  epair0a: Ethernet address: fe:7e:bb:12:48:c3
epair0b: Ethernet address: 92:7b:65:0a:11:92
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9e:24:b5:1f:0e:6d
epair1b: Ethernet address: 82:0f:88:77:a5:c0
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.268s]
sys/netpfil/pf/nat64:udp_out  ->  epair0a: Ethernet address: 4e:00:1e:6f:50:ec
epair0b: Ethernet address: e6:64:be:a7:e0:f8
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b2:de:14:05:83:76
epair1b: Ethernet address: 3a:ce:8e:1c:8e:49
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.259s]
sys/netpfil/pf/nat64:v6_gateway  ->  epair0a: Ethernet address: ce:8b:ac:2c:75:fd
epair0b: Ethernet address: c2:e7:83:a4:bf:71
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 32:74:2c:3a:60:5c
epair1b: Ethernet address: 52:2a:90:5b:9a:6d
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 5a:eb:2a:91:f3:b0
epair2b: Ethernet address: 92:bf:1f:e5:c9:77
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.408s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable  ->  epair0a: Ethernet address: 32:b1:93:16:d4:7f
epair0b: Ethernet address: c6:bc:18:3e:29:1f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8a:00:be:c4:ef:b9
epair1b: Ethernet address: 72:7c:8b:45:a2:8f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 66:29:ae:c0:1c:e0
epair2b: Ethernet address: ea:df:06:df:76:07
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError  [5.428s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len  ->  epair0a: Ethernet address: 26:35:91:47:f1:4a
epair0b: Ethernet address: ca:16:03:27:ea:d9
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ae:f6:1e:43:10:9b
epair1b: Ethernet address: 26:49:05:78:b4:d3
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 22:a6:74:71:12:33
epair2b: Ethernet address: 56:55:85:5f:5f:c4
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
panic: in6_cksum_partial_l2: mbuf len (51) < off(40)+len(512)
cpuid = 0
time = 1759975420
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008baf0820
vpanic() at vpanic+0x136/frame 0xfffffe008baf0950
panic() at panic+0x43/frame 0xfffffe008baf09b0
in6_cksum_partial_l2() at in6_cksum_partial_l2+0x17f/frame 0xfffffe008baf0a00
fr_cksum() at fr_cksum+0xa5/frame 0xfffffe008baf0a30
ipf_checkl4sum() at ipf_checkl4sum+0xbd/frame 0xfffffe008baf0a60
ipf_checkv6sum() at ipf_checkv6sum+0x56/frame 0xfffffe008baf0a80
ipf_makefrip() at ipf_makefrip+0x1691/frame 0xfffffe008baf0b10
ipf_check() at ipf_check+0x15e/frame 0xfffffe008baf0ca0
ipf_check_wrapper6() at ipf_check_wrapper6+0x6f/frame 0xfffffe008baf0cd0
pfil_mbuf_in() at pfil_mbuf_in+0x58/frame 0xfffffe008baf0d00
ip6_input() at ip6_input+0x6be/frame 0xfffffe008baf0de0
swi_net() at swi_net+0x19b/frame 0xfffffe008baf0e60
ithread_loop() at ithread_loop+0x266/frame 0xfffffe008baf0ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008baf0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008baf0f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100033 ]
Stopped at      kdb_enter+0x33: movq    $0,0x121da42(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0xa075c0
curthread    = 0xfffff80004628780: pid 12 tid 100033 critnest 1 "swi1: netisr 0"
curpcb       = 0xfffff80004628cd0
fpcurthread  = none
idlethread   = 0xfffff8000460b780: tid 100003 "idle: cpu0"
self         = 0xffffffff82610000
curpmap      = 0xffffffff81d9f520
tssp         = 0xffffffff82610384
rsp0         = 0xfffffe008baf1000
kcr3         = 0x800000000259b002
ucr3         = 0xffffffffffffffff
scr3         = 0x1c07bff06
gs32p        = 0xffffffff82610404
ldt          = 0xffffffff82610444
tss          = 0xffffffff82610434
curvnet      = 0xfffff8000323ab80
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h16m24s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26930' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins14113982253608047495.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'c8f9a9abd8000a8514e0beee99ffcf48d05ce47b', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../c8f9a9abd8000a8514e0beee99ffcf48d05ce47b/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address