FreeBSD-stable-15-amd64-test - Build #32 - Still Failing
Date: Wed, 08 Oct 2025 12:22:02 UTC
FreeBSD-stable-15-amd64-test - Build #32 (e15e7a5c0b53de0171cd9a3a70fdb93141e9468a) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/32/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/32/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/32/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
e15e7a5c0b53de0171cd9a3a70fdb93141e9468a by mm:
zfs: Use the correct type for raidz_outlier_check_interval_ms
The end of the build log:
[...truncated 3.90 MiB...]
epair0b: Ethernet address: c2:47:37:12:49:a6
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1a:47:cf:8f:f6:77
epair1b: Ethernet address: fe:42:a9:11:1c:b5
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.148s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 0e:d9:3e:f7:61:c4
epair0b: Ethernet address: 46:50:21:58:74:57
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 86:2f:a2:48:38:84
epair1b: Ethernet address: 8a:39:5e:22:86:1a
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 7e:fe:cf:1f:a2:de
epair0b: Ethernet address: a6:be:83:b7:a6:59
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:a0:dc:e5:9d:fa
epair1b: Ethernet address: 32:1c:e3:94:0f:97
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 36:5c:f0:71:4c:fc
epair0b: Ethernet address: 1e:9e:dc:f3:17:7e
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b6:0c:22:b0:08:36
epair1b: Ethernet address: 76:54:27:71:a6:74
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.137s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: e2:1a:75:bf:2c:39
epair0b: Ethernet address: 0e:43:60:7f:5c:6a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d2:21:4d:55:b3:5e
epair1b: Ethernet address: 82:f8:fe:2f:9d:e4
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.137s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 5e:f5:24:a2:0c:86
epair0b: Ethernet address: 0a:2a:46:97:a8:16
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 0e:fb:00:d7:4b:6c
epair1b: Ethernet address: 16:1e:30:d5:93:83
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.137s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 22:87:83:05:fc:d1
epair0b: Ethernet address: ee:3b:2c:c2:f1:6a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: d6:75:85:dc:34:7a
epair1b: Ethernet address: 6e:ee:ea:ff:ba:16
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.136s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 2e:46:10:ac:3c:23
epair0b: Ethernet address: 5e:6a:9e:9f:f3:99
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 7e:a6:88:26:37:16
epair1b: Ethernet address: b2:37:a7:d9:aa:4e
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.126s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 4e:df:84:26:4e:f5
epair0b: Ethernet address: 86:d8:5e:c5:58:f1
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: c2:95:f8:c3:e4:b7
epair1b: Ethernet address: c2:0e:8d:06:ea:a2
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 76:99:e6:c6:0e:85
epair2b: Ethernet address: 62:78:60:5b:e2:b0
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.196s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 66:1b:91:5b:b3:2e
epair0b: Ethernet address: d2:14:71:62:f0:38
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 8a:9a:9e:76:5a:70
epair1b: Ethernet address: ca:ea:fd:a6:c4:e3
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 92:f5:39:58:03:47
epair2b: Ethernet address: 6a:66:3b:91:97:f2
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.691s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 06:32:00:0c:d7:31
epair0b: Ethernet address: 3a:fb:2c:56:06:9f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ce:65:84:66:9c:dc
epair1b: Ethernet address: 7e:36:8c:38:28:b6
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 96:1f:6b:a1:0d:c7
epair2b: Ethernet address: 9a:dd:a8:f5:ac:b4
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f132
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff8022b512596 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 0
time = 1759926106
KDB: stack backtrace:
#0 0xffffffff80bc033d at kdb_backtrace+0x5d
#1 0xffffffff80b73726 at vpanic+0x136
#2 0xffffffff80b735e3 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051a88 at calltrap+0x8
#5 0xffffffff80d84b19 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc3438 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b94 at ip6_input+0x484
#14 0xffffffff80cc0c98 at swi_net+0x128
#15 0xffffffff80b2d359 at ithread_loop+0x239
#16 0xffffffff80b298eb at fork_exit+0x7b
#17 0xffffffff81052aae at fork_trampoline+0xe
Uptime: 1h15m2s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-32' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins10032068305796376052.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': 'e15e7a5c0b53de0171cd9a3a70fdb93141e9468a', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../e15e7a5c0b53de0171cd9a3a70fdb93141e9468a/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address